开云体育

Hello Mark, Sorry for sending in my previous message a link toward a file already mentionned by John G8BPQ about installing Spider on a Rpi. However, if you are going to install a 2m rig for

For more details about Spider install a document dedicated to installing Spider on Raspberry Pi can be found here. You are looking for Install of DXSpider on Raspberry Pi-v1.0x.pdf file. (you must be

Mark, You can also find information on adding a TNCPi for a radio port to DXSpider running on a RPi at: http://goo.gl/ylgq6w 73, Bill N6WS

Mark, You can use any TNC, but there is a version of the TNC-X designed to fit on the PI- See http://tnc-x.com/TNCPi.htm I believe most Linux clusters run DX Spider. There are

After a period of inactivity I have found that the old 2 meter dx cluster node no longer exists. I don't have any internet at my house other than a cell phone. I do have access to a site that has

I think I managed to do it a while ago, using an USB-Serial cable from eBay. The usual issues are USB permissions and finding out the virtual serial port name. 73, Mike

The program you use is LinuxRMS. If you do a search you will find a step by step for K4GBB. Raspberry_Pi_4-Ham_RADIO@...> wrote:

John, I tried your instructions with a new Raspbian build. Works great! Here is my very basic configuration file. What improvements can I do? I'm looking to run BPQ Node with multiple ports to

Hello Bernard, I changed a few things in your first emai such as the HOTPLUG_INTERFACES to eth0. The T0:23 was disabled already. When I sudo pitnc_getparams 0 0 or 1 0 I only see some ff

Tom and co more than happy to share a working image of FBBS with you if required plus the backup software to edit and send via windoze 7 or 8 am now running two pis with fbb one with a radio port and

Tom, check out http://tarpn.net <http://tarpn.net/> We use G8BPQ (so far) for over-the-radio packet networking. FlexNet, alas, is not being maintained. There is also URO node software.

Hello to the group; I am new to the Pi and to linux. I am wondering if there is a system similar to frexnet That would run on the PI for networking,using the tncX tnc? 73 Tom AD2TM

Thanks for that referral. I just one-clicked it. :) 73 de Dave, NF2G

Here is another link: http://k4gbb.us/docs/Raspberry.html http://k4gbb.us/docs/Raspberry.html I have it running on my B+ along with a DSTAR Gateway with DummyRepeater (DV3000) Good

Thanks for the link - I'll check it out!

Thanks for the link...I'll check it out.

Thanks for the advice!!!

Hi, Has anyone here gotten an FT-817 to talk to a Pi via Hamlib yet? If so, I have a few quick questions... -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for

Hi I located a good kit for 69 bucks at: http://www.amazon.com/gp/product/B00LAAZKXQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Here is a cut from the ad: ====CUT==== This Is the Raspberry Pi Model

Hi guys, Just thought I'd add my bit as I too am new to the raspberry pi and Linux. I thought about getting the starter kit but after a little scouting around the Internet for information I worked