开云体育

I have just set it up and looking for FBB forwarding partners etc.. Kevin Sent: Wednesday, July 30, 2014 10:05 AM To: Raspberry_Pi_4-Ham_RADIO@... Subject: [Raspberry_Pi_4-Ham_RADIO]

Dear friends, the attached file is the new release of the NBFM program, the narrow-band FM transmitter, for Raspbian distro. Changes: - name of program now ./nbfm (was ./nbfm.out Please modify your

9600? Use "-B 300" or "-B 9600" command line options.

Cool... Thanks! 1200 baud only? Any chance of getting the other speeds - 300, 2400, 4800, 9600? > Bill, WA7NWP

Wondering if anyone is close enough that would like to come out next year for the Detroit maker Faire to show off their PI set up(s)? I did not think of asking here because of the low volume of

tracker. I have not tested this yet and I am sure that there will be problems with this many links, but has anyone done something similar to this or have any thoughts? A test utility, included with

I had a thought about daisy-chaining a few utilities to make a Pi-FM APRS tracker. I have not tested this yet and I am sure that there will be problems with this many links, but has anyone done

I had a thought about daisy-chaining a few utilities to make a Pi-FM APRS tracker. I have not tested this yet and I am sure that there will be problems with this many links, but has anyone done

You are welcome David.. --------------------------------------------

Thanks ian From: Raspberry_Pi_4-Ham_RADIO@... [mailto:Raspberry_Pi_4-Ham_RADIO@...] Sent: Thursday, 31 July 2014 11:45 PM To:

Ive had that sort of cable laying around back before I was even a HAM and was using Hi 8 video cameras.... 73 Mathison [Raspberry_Pi_4-Ham_RADIO] <Raspberry_Pi_4-Ham_RADIO@...>

The 4 conductor plugs are on eBay. I bought several a year ago for use with my Yaesu FT-60 HTs. I found the good shielded plugs The plug is also used on some iPhones so they are out

I have such an adaptor right here on my desk. It came with a protable DVD player. The plug end has three rings and a tip connection. The other end splits into three RCA jacks. I've seen the plug on

Here is a tid bit from Raspberry.org. Raspberry Pi Learning Resources http://www.raspberrypi.org/learning/morse-code/ http://www.raspberrypi.org/learning/morse-code/ Raspberry Pi Learning

Please be careful using a script like mine: it writes and deletes 2 files to the SD card at each transmission. So, setting very frequent transmissions for a long time could cause damages to the memory

Dear Bill I was thinking about 1200bps packet and my idea was to generate APRS or Cluster packets. Anyway it is possible to transmit audio files containing packet radio baseband tones at any data

It is easy to set 2.5 instead of letting the internal default 5 kHz. Please consider it is a DMA modulator so it works as it can ;) 73s

You're welcome. I'm happy it can be useful. 73s

For those of us in the UK, I should point out that OUR "standard deviation" on ALL of the 2m band is 2.5kHz, not 5kHz! 73 Dave G4CLI -- Dr David J Sadler-Lockwood G4CLI Secretary and Web

How about sending the same 'data' from the file as 9600 baud IP datagrams... Bill