Mark... Thanks for the speedy reply.? I followed your advice and
burned a new SD card. This time there was lots of green blinking
which finally stopped leaving only the red LED on. Still no HDMI.?
I'm hoping you have an idea for further troubleshooting.? I've
connected the Rpi3B+ to another HDMI cable and monitor that is
currently working on my main PC.? No problem with cable or
monitor.? 73 Doug K7KY
On 12/7/2020 9:12 AM, Mark Griffith via
groups.io wrote:
toggle quoted message
Show quoted text
Your SD card is bad. You'll have to make a new one.? Use a class
10 card for years of service.?
Mark?
KD0QYN?
On Mon, Dec 7, 2020 at 11:03 AM, Doug K7KY
Hello... I'm new to the group.? My Rpi3B+ has
been running an IC-7300
for nearly a year, but suddenly no HDMI
output.? At boot, the green led
was still blinking, but no HDMI. After
fiddling around trying to sort it
out, I now have no green led at start, just a
steady red.? There is 3.3v
on pin 1 & 17.? I've tried booting with
BootBerry, but no joy.? I hope
it's not toast. Doug K7KY
