开云体育

<mukundamoni@...> wrote: 931 model.I recently got one and am awaiting a manual before putting it to use. > VU2MVX,VENU Most of what you want for the 931 is in the FILES section. The 931 manual is

Thanks for that: can't answer your question about Bowman hf kit, as have'nt had much to do with that, although I know that it's working very well on Op Herrick: some of the Siemens compatable HF kit

Stuart Thanks for that: my applique for the 1851 would do a turn as a toasted sandwich maker, as the bias supply to the PA and driver has gone up to 6v, turning them both fully on, and giving about 5a

Dear Stuart, Can you spare me a copy of the manual for the basic Racal Syncal 931 model.I recently got one and am awaiting a manual before putting it to use. VU2MVX,VENU Stuartjmckinnon@... wrote:

Hi Barrie - you may be in luck here ! Originally these came out througha guy called Tony Sinclair who had hundreds of them in his warehouse in Royston, Herts. Tony sold the lot on to somebody about

Alan sorry forgot to add, welcome to the group, I can see quite clearly your Amateur Radio c/s at the bottom of your mail, Durrrgh Have quite a bit of racal kit in my collection, several different

HI folks. I am seeking informaiton on the Racal Kaynard transceiver which I bought few years ago and would be grateful if any one could point me in the direction of getting electronic schematics or

Alan I did not ask if you hold an amateur radio licence? I would be very interested to hear about Bowman, specifically are the frequencies designated in the Clansman way, ie 2Khz above. Does it have

First posting from me, thought I would log on and say "hello" to the rest of the group! Have had involvement with Racal kit over the last 30 years or so, in various capacities, as well as the other

Dear Guys, Anybody knows where I can to find Racal PRM-4021 technical manual in pdf format ?? I have problem with the szinteziser, out-of-lock condition...Help ! regards 73 Andy

<mukundamoni@...> wrote: copy to me ? Check the files section Jim VE3DDY

Hi Does anyone have any schematic diagrams for the BCC66H Jaguar radio? I am trying to get rid of the 150hz tone on tx, in the alignment instructions, it explains how to measure it but doesnt go into

Dear Brian, I undestand you have the manual of RACAL RA 931.Can you email a copy to me ? Venu VU2MVX Brian Bjerkelund <k7ais@...> wrote: Dan: Thanks for your reply concerning the 929. It does use

Dan: Thanks for your reply concerning the 929. It does use the 6-pin connector. I have the TRA931 manual but am always looking for the specific documentation. I am currently using the receiver with a

Brian, I have never seen a 929, but if it has the "standard" Racal 6 or 7 pin audio connector, then the little MA988 speaker / amplifier should work; it works with the other equipment of that period,

Gents: I have a very nice RA929 receiver but have been able to find very little information on this radio. Currently, I have need of a rebuildable MA934 battery and a manual copy for a MA945S battery

Hi Tony. Yes, the receiver works on both noise & tone squelch, so it works with normal radios fine. Tunes in 25kHz steps only. Sorry, I have no handbooks for it ! Cheers, Chris. ffr58kk90

Hi Chris Thanks for the reply, I have printed it off to take when I go and see the guy with the radio next week. My intention is to use it primarily on 4m as there are quite a few people on 70mhz

Hi Tony. I own a couple of Racal PRM 4720 VHF sets which are very similar to the Caracal, minus the hopping. Easy to program. On the Volume control knob, there are two positions, PR & PTR. These are