开云体育

Welcome! this group is created to add information about R1CBU's code changes to the X6100. Also, questions can be posted here too.

the feature overview; https://r1cbu.ru/index.php/home/radio-software/x6100/2-x6100-de-r1cbu ( https://r1cbu.ru/index.php/home/radio-software/x6100/2-x6100-de-r1cbu )

https://r1cbu.ru/index.php/home/radio-software/x6100/

Hi Oleg, first i'have to say. Thanks, for this really nice Project. here some notes about my experience ... 1. it would be nice if it is also possible to save memory channels in all band secments and

I found a small bug in memory storage/recall In the first set of mem locations you can save, but not recall The second set is working ok Kind regards Jan

I cannot get hamradio deluxe to work with this configuration, under the official firmware, it connects fine using Icom and IC-7000 settings, at some point would be nice if this would work

HI.....my x6100 r1cbu soft is not working with omnirig......any info with settings? 73 de Borut s50b

Is there a setting in the R1CBU firmware that allows one to toggle PTT on (TX) with a button press and off (RX) with a button press as opposed to having to hold down the PPT to TX and release to

Got the latest v0.18. Works great, AFAICT. Is this a place where I can make a request for the software group that does this? If so, then let me explain as to what I really need. I use the x6100

Greetings, Thanks for all that you do, it is making the radio better to use in many ways. I tuned to simplex 146.550 and transmitted. ?It appeared to transmit but my other radios did not hear it.

Hi It says Transverter, That is because you need a Transverter for the radio to do VHF/uhf, Dave [email protected]> wrote:

The X6100 is a HF + 6 meter QRP transceiver, it does not have VHF/UHF capabilities.? As Dave pointed out, you need a transverter, a separate piece of equipment, to operate on the VHF/UHF bands with

My mistake, I quickly watched the video. I had read a post a while back where someone thought it may have that capability. I was doubtful. I have a 705 and 7100 so I’m good. Thanks for the

My X6100 is tied to a XPA125B amp using the ACC cable for auto band control. When using your firmware (which is great, thanks!) the XPA125B will constantly jump between bands while transmitting. The

https://youtu.be/yHXI60i56UE?si=0nKQzwnyCHf9bmYF

Hi Matt The radio does not do 2m 70cm without a Transverter unit connected, and I told him when I had seen the video that he was overloading his front end of the

I used the same setup yesterday with no issues. RICBU V19, X6100, XPA125B, in auto mode. Had several contacts.

Are there any ACC menu items I might be missing? It's odd that it works with stock but fluctuates when using R1CBU, so I think I'm missing something like a setting somewhere.

Hi there!? I found that with the voice announcement turned on it develops loud feedback loop through the microphone.? I tried turning down all the other volume and gains to eliminate it but nothing

I too had the same problem with my x6100.