I'm writing from my work computer which doesn't have QTR installed, hopefully someone
else will kick in on this and give more info.
Anyway, I would guess that you're using a Windows machine, so I'm going to be limited
help from this point on because my knowledge does not extend to Windows in any
meaningful way.
I think I had to "create" a Quad2200 printer device in my printer setup utility, or perhaps
QTR did that by itself, I don't recall.
Within the first dialog "print with preview/page setup", there is a pull down menu that
allows me to select either the Epson 2200 printer or the Quad2200 printer device. When
the Quad2200
is selected, new options become available in the "print" dialogs.
Make sure the "more options" button is checked in the "print with preview" dialog, and
then you should be able to see the "color management" dialog. This is where you should
find the color space options. This where you would set the 'print space' to "same as
source".
--- In QuadtoneRIP@..., "Bernie Raffe" <bernieraffe@a...> wrote:
Harv,
I've been using QImage to print colour and QTR for black and white.
I just used PS CS to try out your suggestions, but it doesn't appear to
work the same way as yours.
1. The print preview dialog doesn't have a color space option
2. When I click on Proceed, I just get the Epson driver dialog,
there's no menu for QTR
Sounds like your QTR is more integrated with Photoshop than mine for
some reason, I always use QTR as a standalone program.
Thanks anyway,
Bernie
-----Original Message-----
From: Harv Seeley [mailto:harv@f...]
Sent: 25 March 2005 13:41
To: QuadtoneRIP@...
Subject: [QuadtoneRIP] Re: [Quadtone RIP] Curves for Epson 2200/2100
Bernie,
We should back up a little. I'm running QTR through Photoshop CS on
OSX. In Pshop I
select "print with preview", this brings up the first dialog where I
select "same as source"
for the color space and choose my paper size and orientation. Then
click on "print" which
brings up a second set of dialog boxes. Among the pull down menus I
select the "matte
paper" paper type and print resolution, then go to another pull down and
select "no color
adjustment, then go to the QTR menu and select QTR's paper profile and
the tone settings,
then finally print.
Does this correlate to your set up at all?
ps, I think I was wrong about the enhanced matte setting, matte seems to
the be proper
option.
--- In QuadtoneRIP@..., "Bernie Raffe" <bernieraffe@a...>
wrote:
Hi Harv,
Thanks for the info, but I don't see any way to set the color space in
QTR. Also there's no Enhanced matt paper, only matte.
Cheers,
Bernie
-----Original Message-----
From: Harv Seeley [mailto:harv@f...]
Sent: 24 March 2005 20:25
To: QuadtoneRIP@...
Subject: [QuadtoneRIP] Re: [Quadtone RIP] Curves for Epson 2200/2100
Bernie,
I don't have QTR in front of me, but I recall that it requires your
paper profile to always be
set to enhanced matte and color space set to "same as source". If
you
are specifying the
lustre media profile, you may be introducing shifts. I hope I'm
remembering that properly!
Yahoo! Groups Sponsor
ADVERTISEMENT
HYPERLINK
"
D=groups/S=1705019182:HM/EXP=1111844497/A=2593423/R=0/SIG=11el9gslf/
*htt
p:/www.netflix.com/Default?mqso=60190075"click here
HYPERLINK
"
s/S=:HM/A=2593423/rand=997527521"
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
HYPERLINK
"
p/QuadtoneRIP/
* To unsubscribe from this group, send an email to:
HYPERLINK
"mailto:QuadtoneRIP-unsubscribe@...?subject=Unsubscribe"Quad
toneRIP-unsubscribe@...
* Your use of Yahoo! Groups is subject to the HYPERLINK
"! Terms of Service.
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.8.1 - Release Date: 23/03/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.8.1 - Release Date: 23/03/2005
