开云体育

I updated the QNetGateway software and i can't seem to get the radio to communicate and link and such. I looked at the journals and i think they are working but the qnetgateway isn't scrolling as much

It was a pleasure to meet Tom at the conference. I really applaud the work he is doing. Just a minor clarification, it is the DPLUS infrastructure that is looking for a specific authentication (not

At the Digital Communications Conference in Albuquerque last month, John Hays, K7VE, told me that the G2/G3 Trust system has changed how gateways/users are authenticated. I got the technical details

You’ll have to try it, but it is unsupported. Generally, you should only be connected to QuadNet on one device. The IP address limitation is not your local IP, but your WAN IP. We haven’t tested

Can I have a hotspot with Pi-Star turned on using mode B in MMDVM config AND a QnetGatewat itap mode hotspot running with Mode A in qn.cfg at the same time? If I transmit on the itap in terminal mode

Colby W1BSB and I have been very busy! We have been working on an intermittent problem with the "follow me" feature of Routing. We think we have finally locked it down. Some changes have been made to

Unfortunately when I incorporated new code to support the Icom Stack repeater, I inadvertently introduced a bug that prevented you from properly receiving a one-to-one Callsign Route.? You could

HI Colby, I have mentioned to our group about the whitelist and blacklist function and understood the purpose of that function. I will look into the option you provided. Thank you.

Keep in mind you could run one that isn’t open to the public either. Most reflector software has a whitelist or blacklist function, and I know for sure ours does, so you could open it up to only

Hi Colby, You are right, and it is more efficient to do that. Thanks.

That would make sense. In your case, especially if you plan on adding repeaters to the mix, an x-reflector would make the most sense, since you can link multiple repeaters to any module you want.

HI Colby, Thank you for the advice. I will relay the information to our group. I think the reason why our guy could not like the repeater to the XRF, is because their system is not updated with the

The file is located in /usr/local/etc/gwys.txt Just edit that file. Once the edits are done, do systemctl restart qnlink. Personally, I would link the two repeaters to an XRF reflector. If you

HI Colby, Thank you. I found out the problem. Everytime I program the ID-4100, MY Callsign is being erase and that was the reason I could get into my hotspot and gateway.? How do I update the

Make sure you’re using the correct CQCQCQ. In order to pass the reflector, you’ll have to either program the radio with a Your call of CQCQCQ, or go into the menu and select the Use Reflector

Hi Colby, I set my ID-51 to transmit to the repeater, the repeater is link to the XRF reflector and my hot spot will display that I am transmitting, but when I use my new mobile same set up, the

Hi Will, Thank you. I will try other repeaters. I just wanted to make that it is working.

Hi Colby, How do I add repeater on the host files? I was a member of the PAPA System and we were instructed and informed that after you link their repeater to the reflector or other repeater that you

The problem is likely the repeater is not in your host files. Repeaters generally are not, only reflectors. It could also be, as Will stated, that the repeater owner is disallowing users linking

It's possible for repeater owners to lock down their repeaters for linking to and may want you to link to reflectors only. Will / W4WWM