开云体育

Hi Will, Something odd is happening to Maxim DL 6.5. I managed to install it and when I try to open it, it gives me this message - Maxim DL Pro 6 Your PinPoint Full License has expired, and a newer

Hi Eduardo. Only connect the camera after all the software is installed, including the QSI-MaxIm Plugin, then after checking that MaxIm starts up ok and you have entered the license key close MaxIm

Hello Will, I just wanted to thank you for all your great expertise. The step-by-step instructions are easy to understand for this old geezer. Question: does the QSI 683 camera need to be plugged in

Hi Eduardo. I've just sent you a private message from the Diffraction Limited forum with the download link for MaxIm DL 6.50, just double click the file after you download it to install MaxIm

Hi Will, I really appreciate your time and effort in helping me solve my issues with the software. So, let me see if I understand you correctly. I should go back to Maxim DL 6.5 in order for all this

Hi Eduardo. I took an old QSI 683 camera out to the observatory today and can confirm your initial problem when attempting to open the ASCOM "Properties" U.I. on Windows 11 24H2 and ASCOM Platform 7

Hi Eduardo, Bruce... The installer for the MaxIm DL native QSI PlugIn puts the camera plugin .dll file in the wrong folder and MaxIm DL 6.50 doesn't see it, that was because Diffraction Limited

You know, there's a MaximDL plug-in for the QSI cameras, that's something separate from the camera drivers.? Have you installed that?? With the plug-in installed, MDL will identify the camera as

Hi Will, Well, I went down your great list of information and I am still stuck in a corner. I am about to go to ASCOM platform 7 and try your suggestion. I just thought that I would give you a

Hi Eduardo. Try installing these two Microsoft Visual C/C++ Redistributable Libraries, these are not supplied with Windows 11 and the older version(s) installed by the QSI installer package may not

Hello? Group, Purchased an new PC W11, updated to Maxim DL 7.11, installed drivers and software for QSI, installed ASCOM Platform 7. In trying to setup my QSI 683wsg in the Setup tab, I see the

Geof, Jerry, and Kevin - thanks a lot for the kind remarks. Bruce

Bruce, That is sublime. I've not seen another image of M96 that shows the spiral arms, or outer ring structure extending so far as to encompass those 2 blue stars at 9 o'clock in your image and all

Remarkable clarity, detail and color.? A magnificent image. Jerry L. Floyd

A wonderful image Bruce. Beautiful detail in the galaxy arms. Clear skies, Kevin To: "QSI-CCD" <[email protected]> Sent: Thursday, March 6, 2025 1:32:51 AM Subject: [QSI-CCD] M96 image

This is an image of M96, a bright spiral galaxy in Leo and part of a small group of galaxies. First catalogued by Messier in 1781, it is roughly the same size as the Milky Way galaxy but has an

Nicola, Check the Properties of your USB Controllers in Device Manager (<Windows key>X), and see if "Allow the computer to turn off this device to save power" is checked in the Power Management tab.?

If your camera is plugged into a USB hub that is not powered, and the computer is running other software (planetarium, guiding, etc.), the computer will prioritize lower processor-demanding software

As a suggestion, you might try changing power cable. That's my only thought. Ray _____ From: [email protected] [mailto:[email protected]] On Behalf Of Pico de Paperis via groups.io Sent:

Dear All, I suffer from random camera disconnection. Camera: QSI683wsg with ASCOM platform 6.4 SP1 on Windows 10 Basically everything starts normally but then after a while I get a disconnection