Hi Will,?
Something odd is happening to Maxim DL 6.5.? I managed to install it and when I try to open it,
it gives me this message - Maxim DL Pro 6
Your PinPoint Full License has expired, and a newer version is
required for Maxim DL 6. Do you want to downgrade to Pinpoint LE?
Now, at times, I can open Maxim 6.5 and then for some reason, it diverts back
to the PINPoint. And I cannot close this message, without shutting down the PC.
However, I did mange to change the 'Custom Location' for the QSI Plugin. Worked nicely
but cannot open Maxim 6.5.
Eduardo
toggle quoted message
Show quoted text
Hi Eduardo.
?
Only connect the camera after all the software is installed, including the QSI-MaxIm Plugin, then after checking that MaxIm starts up ok and you have entered the license key close MaxIm and plug-in the camera.
?
Next time that you start MaxIm with the camera already plugged in open the Camera Control window and on the setup tab select QSI Universal from the drop-down menu for camera and carry out any configuration steps needed.
?
Repeat the same procedure to select the filter wheel by selecting QSI Universal in the drop-down menu under the filter wheel section of the camera setup tab.
?
Will.
