开云体育

Peter/Barry - si si - thank you both very much!!

You figured it out Bob. The native QSI drivers are 32 bit and therefore are not included in TSX64. TSX 32 will still work in the future,? however at some point they will stop updating it. For now, I

My previous issue was resolved with a NINA update. Never used SKY X, loving NINA! Pete

Thanks Pete - I will do that. I also saw your other thread about switching Gain settings in NINA. Concerning my QSI drivers in SkyX - I found this on the SB forum. Sounds like the switch to SkyX 64 is

Bob - 0=1x1bin (High Gain) and 1=2x2bin (Low Gain). If you set the ASCOM driver to High Gain you will also see a default of (0) in dialog boxes as the default gain setting. Pete

I have been using my trusty 6120 now for more than 6 years. It still works quite well! I have recently upgraded my Observatory computer and am re-installing all of my software and drivers. I am

Good news? ? ?:-)

Solved ! Atik support suggested to try to update the firmware and it worked. Julien

Very nice image, Bruce. I hope the summer monsoons have faded away by now and you can look forward to some clear nights in which to enjoy using your wonderful equipment! Cheerio Jerry L. Floyd

This is an image of Sh2-135 in Cepheus.? It's an emission nebula that isn't often imaged and then usually with wider field setups that also show some neighboring LBN objects.? I only added it to my

Yes, probably the best thing to do. Julien

I agree. Contact Atik support, they were able to help me with updating my firmware a few years back. Pete

Why not ask them at ATIK....... https://www.atik-cameras.com/qsi-core-astronomy-software/

It's not a filter issue. By the way, the camera doesn't try to move the filter wheel. As this seems to be some kind of firmware issue, would it be a good idea to do a firmware update ? Julien

I have seen this documentation. But none of the documented error code match the LED sequence I see. Julien

Here’s an online manual for the 500-600 series cameras. Pages 26-28 have various LED blink error codes. QSI-User-Guide-3.1 PDF Document · 2.8 MB

Hi, I will check Julien

Yes, it's the last one. Given your description this doesn't sound good. Julien

Hi Julien I had a problem similar to this several years ago with a QSI 516 WSG camera - after a number of attempts I discovered a loose filter that was causing a jam in the filter tray and probably

I have some additional codes. Wondering if the last one applies (no red involved): Special codes: Solid amber (at power up): Camera performing the power on self test. Green flashing: Power on