开云体育

QDX latest board - L1 and D3 problem

#qdx

Chris KD9TVT All Messages By This Member #85979 Hi - Tonight I started my QDX build, and everything was going smoothly until I came to soldering in D3. One of D3’s holes is very close to one of the L1 holes, and according to a quick continuity test I believe I’ve bridged the holes with some solder.? Are D3 and L1 connected at that point by chance, or do I need to continue to try to desolder? Thank you! Chris KD9TVT
mike.carden All Messages By This Member #85980 On Tue, 31 May 2022 at 13:03, Chris KD9TVT <cweiland@...> wrote: Are D3 and L1 connected at that point by chance, or do I need to continue to try to desolder? A quick glance at the schematic diagram on page 36 of the QDX assembly manual reveals that the anodes of D1, D2 and D3 are all connected to one end of L1. -- MC VK1MC
Chris KD9TVT All Messages By This Member #85982 Thank you! Don’t know why I spaced on the schematic. It’s my first “real” radio kit build, freaked out a bit. Chris KD9TVT

Previous Topic Next Topic