开云体育

Hi Hans Many thanks for information. So I shall wait until this feature is implemented. Hope it's take not so long. 73 Uwe DF9YW

Did you configure the QMX+ to listen to the internal GPS module? 'System Config'/ 'GPS Source' set to 'QMX+ Internal'

I've encountered the same issue multiple times with my QMX. The GPS protection kicks in while transmitting CW. No idea why this keeps happening but it messes up the QSO. The issue temporarily goes

I assume it is the part that you mount as a storage space for the handset. There should be a small magnetic switch that lowers the temperature when you place the handset on it during operation

G is GPS Protection and usually comes on if RF is causing issues.

Hello, I am powering my U4B with a usb solar panel and battery, since the U4B does not have controller for a solar panel or battery charging. I'm not using this on a balloon, so the weight doesn't

I recently purchased a QMX+ kit and soon started following this group. I finished my kit today but I'm having a couple of issues after kit completion and I'm hoping to get some ideas. I've nearly

*Actually? NOT EOL? ,? another mfr has taken over the RD16HH and similar line.? My contact has shown me photos of the new devices* *I don't think it's the WhoFLUNGDUNG company operating out of a

Here another picture of the station and it's components.? The item in question is on the foreground.

It may be worth noting that my KX3 & IC-7000 operate faultlessly using the exact same setup. Over the last couple of months I have logged around 228 QSO's (42 Countries) with the QMX's using this

G'Day Corey Couldn't manage14 times - but did get 10 turns & an extra clip-on for good luck.? No change. The 6 second video shows the "Pulse" on Transmit. I couldn't get the cables any

Sorry that that happened! The clearance between the encoder and the back of the barrel connector is so tight on my build that the tape was an absolute necessity. I actually think that the kit should

Ouch! But thanks for sharing the tale of your misfortune.

Milt, It was a bad cable problem. 73 Kees K5BCQ

When tantalum’s blow, they’re like raging sparklers. Years ago, I had one blow up in my face. Good thing I had my glasses on! <william.brown@...> wrote:

Both are 3X more expensive than BS170 at DigiKey. I have used my stock QMX on FT8 and. CW for more than a year with no failures. I expect my QMX+ to do the same. I always have SWR protection on and

And what do you think of this WB2CBA modification from BS170 mosfets to FDT86256 PA mosfets? I bought the kit for my QDX but never installed it as I take always high precautions with the tuning of my

That's BRUTAL! Thanks for the heads up. Cheers and 73s --Corey (WB0RXQ)

Yep, I had the same issue on 17 meters. Wrap your USB cable around a 43 material toroid 14 times and see if the problem doesn't go away. Cheers and 73s --Corey (WB0RXQ)

So post-COVID travel restrictions are finally easing up and my work sent me to northern Europe for some meetings. Of course, I had to bring the QMX (rev 1) along to attempt a mini "dxpedition" (under