开云体育

I don't think I can, there's no room for images in this site. Here are the images, in case someone can coerce it into doing things

I ordered, but have not received yet, the: https://www.amazon.com/dp/B08RRWWJ7Z?ref_=pe_123509780_1038749300_t_fed_asin_title Mark K9TR

https://www.youtube.com/watch?app=desktop&v=qd6ViDMzOY8

Tony, list of the countries:

Trouble with these measures is that it not only about the tariff, it is also about the extra work involved, with all the forms to fill it takes easily somebody 10 to 15 minutes to process it, plus

It’s not just FedEx, I had a similar experience with UPS recently (was not a QRP-Labs order). The UPS fees were more than the tariffs and in total amounted to 24% of the order total.

So as @Ludwig_DH8WN pointed out, I checked the soldering of the L401, there were some toroid soldering points that were not making good contacts. After soldering them well, the measures are of around

thanks for the confirmation Hans i may have to buy a QMX to have a play, as lack of multitone digital modes was all that was holding me back :) Peter M0PWX

Figured it out. I got a solder bridge across two of the pins of IC204.

It continues to start up in boot loader mode. I can't talk to it using WSJT-X, it always starts up as a thumb drive.

We had seven folks join the MI QRP Zoom Chat on 03 April. Please join us Thursday April 10 (and every Thursday) at 4PM Eastern for the Michigan QRP Club weekly QRP Chat where the main topics will be

I replaced the bad output transistor in my QMX, and it wouldn't boot up. I get a USB drive, so I can talk to it through my computer. I tried dropping v27 firmware on it. It hangs on "Initializing:

Hi Hans, it wasn't that tricky :-) have a look at /g/QRPLabs/message/142338?p=%2C%2C%2C20%2C0%2C0%2C0%3A%3Arecentpostdate%2Fsticky%2C%2Cqmx+rtc%2C20%2C2%2C0%2C112053543 :-) WOlfgang

Bien fait, Randy! 72 de Russ, va3rr

I just completed loading the new firmware using Putty on my Win11 laptop, I also did the calibration. I took my time and made sure the QMX didn't get too warm, all seems like a success. I have tried

Thanks Stan!? That fixed it.

Thanks for the update, you are the best. Mike Krieger gmail.com@groups.io> wrote:

A new chat has been created: Hello Hans, hello guys, I designed my QRX+ for a supply voltage of 9V by appropriately designing the output transformers. I have now also tested the current beta

I? have a nice QMX+ and QDX for sale. The QMX+ has a case and GPS unit installed.? Work good.? Typical power outputs.? It has the SSB software but has nor been calibrated.? $185 shipped to CONUS

See you Thursday night! Jack, W8TEE