开云体育

Simply…Thank You! -- Trevor (N0YMA)

Hey all! I’m not saying it would be an ideal situation or anything, but does anyone know if/when we will be able to use the onboard mic for ssb operations? I really love the portable nature of my

First VARA (Winlink) tests with the new SSB-firmware. CESSB is turned of for that. Looks like that it works flawlessly.

Be aware that some of the newer power banks do not support 12V operation. 73, Don N2VGU

I use the same thing for my qmx but I was just wondering if the amplifier works off of 20 or if you step it back down. wrote:

Export GPS NEMA data strings and PPS via one of the serial ports for PC clock discipline using public software.

One of the HackRF clones with a port-a-pack add-on board is what you are looking for. Filters, amps, antennas and regulatory fines or bail are of course, extra. YMMV

Hi Scott. You did post on this back on April 25. There were a few suggestions made that you followed up on. I’ve had another thought. The level of the audio tone coming through the audio circuits

Ooops, My QMX should read my QMX+. 73 Ian G4GIR

On Sat, May 3, 2025 at 07:43 AM, Jiri OK5WA wrote: The power bank must be PD capable, otherwise the default is 5V. I use an Aliexpress pre-built trigger cable. Vy inexpensive. 72 de va3rr > > The

GM Scott, It appears that you have a cold solder joint. Seldom do find one by looking even with magnification. Generally I take a hot DRY iron and touch up the suspect area(s). This almost always

This is a known problem, you cannot tnable the Japanese? band on a Hi Band QDX. Several years ago Hans answered he would modify the firmware but this has not been done. 73 - Pierre - FK8IH

How do you power the amplifier? I'm guessing stepdown from 20 back to 12? Do you have any pictures of the trigger board in the QMX? [email protected]> wrote:

The simplest way to sort out power for a QMX/QCX equipment for ever is to add a little module like this https://www.rotorama.com/product/usb-c-trigger-module. You ?an select 9, 12, 15 even 20V and

Exploiting those new CAT codes too - given up for now extending flrig and added a little companion widget which is showing the LCD contents and signal :-) Well happy customer. Anyone else driving the

Hello. ?I have seen these measurements and symptoms on many QMX rigs after some kind of failure. ?It is most certainly the cpu being damaged. ?It’s common for a cpu to sort of work like yours but

My main comment is that leaping to conclusions based on measurements of the resistance of semiconductors using a meter is not reliable because the voltage drop across diode junctions will give

You are right. What used to happen when selecting and confirming ‘update firmware’ was that a new drive (QMX) would automatically appear in the finder. This update appears to require a power down

Hans, Brilliant work - many thanks. Errata in the operation_1_02_000000 manual. Page 126 CAT code MD should include 1:LSB 2:USB now? 73 Simon

I had been puzzled for a while because I couldn’t get the device to transmit on the 20m band only. Again today, I played around with various settings, hoping to fix the issue. While modifying