开云体育

Sure hope that's it for you too.? Greg Yahoo Mail: Search, Organize, Conquer On Thu, Apr 3, 2025 at 3:35 PM, secondchancesailor via groups.io<jagillaspie@...> wrote: Greg,

I assume you could use the practice mode, and you wouldn't be transmitting.

You can buy screen dimming adhesive film on Amazon for $12.

From the readme:? "Behaves well when output is suddenly shorted and then the short is removed." Try this: The most brutal power supply torture test I saw was to connect the supply output with heavy

Michael, that's a good message. But honestly I have no clue how your work could repair your problem. Maybe during your work you unknowledgeable removed a tiny metal piece. I hope the problem never

I can't see any error in the related CAT commands on QMX (FA, FB, FR, FT).? They operate as described in the manual, and as the basic use of them is described in the Kenwood definitions.? But as

You might check to ensure that you have not spoiled the harmonic suppression in the process. Hopefully the increased power is not due to harmonics also getting through; the presence of harmonic energy

Hi Steve,? I haven't done the LPF sweeps because I really don't know what I'm looking at when I get there.? ?I'll take a look and see if I can make any sense out of it.? Thanks for the

Greg, Funny you should mention that!? One of the last things I did before everything stopped working was to install the latest version of FLDigi.? ?I didn't know about the hidden zombies, will

I just got this one and it's the best so far, better than my trusty Retevis speaker-mic and also better than the original speaker mic of my Kenwood TH-D72E in terms of noise / sensitivity / required

The wiki page QMX External Microphone Options ( /g/QRPLabs/wiki/39099/219907 ) has been created by Andreas DM7AK <mail2dm7ak@...>.

Around 800 ohm worked best for me. Dave

Additional update - I let it run in RX for over an hour and there were no issues! In fact, the only reason I had to power it down was because I had work meetings to attend! I did try some diagnostic

as far as I remember, Hans said, that QDX will not have the SSB feature regards peter

Rig is working normally. Normal power out on all bands. Just the SWR sweeps are flat. Thanks for looking. Tony AD0VC Example of my 20 meter

Hi Peter 1:- now we have the SSB firmware released, can we now do multitone digital SSB works on USB sound card too, the audio source is selected in the SSB menu. When USB is selected you can use any

I just ran a SWR sweep on my QMX+ which is running version 3 of the beta SSB SW.? I am not seeing any change. Have you verified that the you didn't lose one or more of the BS170s (final power

Peter: 1) People are already using multi tone digital modes. 2) The QDX does not include amplitude modulation capability so SSB is not possible

Stan, I connected a Fluke 289 in series on the +DC leg of a 12 VDC power adapter measuring 13.4 VDC output at open circuit. QMX was unplugged to ensure it was off.? Plugged in with the barrel

2 fairly simple question, not seen anything oblivious in the digest emails, so apologies if these have already been addressed @hans 1:- now we have the SSB firmware released, can we now do multitone