开云体育

While waiting for cables to arrive to hook up my QLG2 to my 30 meter QCX Mini, I tried WSPR absent a GPS in line to lock the clock. I set the clock manually via the onboard QCX Mini menu by watching

Thank you Hans!? I've been greatly enjoying my QMX+!? :-)

Hi all I released firmware 1_00_020 for QMX and QMX+ which you can download at http://qrp-labs.com/qmx and there is also an updated operating manual for this version. Please note, this is a minor

I agree 100%. It's a ton of fun and surprising the amount of DX that is possible given the conditions and the power of FT8. Since mid-May I have worked 23 countries and completed the 13 Colonies clean

I also had a bundle of caps in my drawer, but I decided it was best to buy the right ones, Look at

Thanks for your reply Dan. I had considered shielding but before doing that I decided to take the time to run all of the diagnostic sweeps on all bands with and without the speakers sitting on the Dev

I've been using my mid-band QMX for several weeks on CW and FT8 (mostly CW) and have had a lot of success, the majority of my QSOs coming with US stations. But today I ventured up to 15 meter CW and

na5n PDF Document · 1.7 MB Sent fromj my iPhone

Dear David, Board tapping is a good method in finding an intermittent connection sometimes. I have done this with some success in the past. You might help narrow down the area using a narrow

Most devices are tested at the die stage of manufacture, but not many devices are 100% tested after packaging. Over 50 years of designing and have pcb assemblies made, the failure rates are

That leaves me one idea to explore, but I'll have to build the kit and measure transients to check it.

Dear Greg. My resistance measurement comes and goes.... when it isn't .4 ohms it is about 2.4kohms... tapping the board makes it change.? I have gone back to the work bench and rechecked some solder

In my case, I went out of my way to ensure that I had proper ESD procedures in place when I opened and assembled my kit. Wrist strap, anti-static mat with grounds. The unit powered up perfectly the

Hi All I finished my QMX+ build on June 28. After some tweaking on the LPFs it was on the air and working well. I worked the 13 Colonies Special event? with the QMX+, worked all 13 colonies and

Both my QMX builds came in an anti-static bag. The instructions do say to observe ESD precautions, but the boards see quite a bit of handling by the builder to separate the various sub-boards and

Doh! Indeed it is. What I was seeing was the prototyping board through the bubble wrap, now that I've got the thing completely unpacked. That rules out my shipping idea.

Dear? Ludwig, thanks for the links.?? I got them yesterday and used the information to try to log into the diagnostics... I did get the hardware page and some helpful information. thanks for

Hello Chuck The main board IS anti-static packed... 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl [email protected]> wrote:

Wolfgang Pauli once said to Niels Bohr after a lecture "Your idea is crazy, but is it crazy enough?". My kit arrived Monday, and I've been finishing a 1.25m repeater before starting (think of a horse

Thanks Jim, let me know if you find anything... 73 Dave G4FAW