开云体育

Hi Andy Ok ok ok. I'll add it to the list! When you say "speed setting in WPM" - doesn't the kit already do this? There is a CW mode, where the speed setting means WPM. FYI I have been working this

Hi to all members of the group, I have just finished building the UQRSS 2 kit and have been spotted on 40m, I entered a frequency of 7.040.150 but am being Rxed on 7.040.070, do I need to change the

Wideband FSK CW. By wideband I mean 200Hz or so as used by many 28Mhz beacons plus speed setting in WPM. (FSK could be any value up to 999Hz) Would be great for playing fox hunting, or running

My thanks to Tony and Phil for publishing pictures of their builds, and to everyone else, like Keith, who has given details of their construction. All of your experiences are helping me plan my own

I have one further update regarding the initial time setting from the GPS using the Adafruit. If it's all powered off and I start the GPS and the U2 at the same time, the U2 will give a slightly

Same here. Have done for many years. More hassle than it's worth with RF about. Anyone for PME ? ;-) Regards to all, Andy

Alan That's a whole can of worms you have opened. I would do the same or similar, I run in a Mains Earth free environment. I am sure Andy knows what he is doing. In my case connecting the 'safety

I assume that's an incoming 240V mains cable feeding the transformer. It looks as if you've chopped the earth wire adjacent to the end of the outer jacket. As it's a metal box, it needs the safety

Nicely done Andy.... Philip G4JVF

I've uploaded a few pics of my U2 in the files section. Hope the may be of interest. 73 de Andy G0FTD GQRP 13690

Was given some uBlox LEA-4s modules this morning in addition to a Cirocom 587D patch antenna. Wondering if anyone has used these uBlox modules with the ultimate kit(s)? 72, Chris kQ2RP

On 23/05/2013 21:50, David Atkins wrote: > > I hope the detailed description of the erratic behaviour, recorded below, > will give an indication to someone of the cause. > > My Trimble Jupiter modules

I hope the detailed description of the erratic behaviour, recorded below, will give an indication to someone of the cause. My Trimble Jupiter modules refused to register [both of them]. So did

Played FSKCW and Slow Hell on 40m earlier, works very well and watched the quality of my signals on a couple of grabbers. I'm pleased to report that despite being run with no heatsinks for hours on

Hi Philip Tiny by normal standards but I don't have much space, it's an inverted L 5.5m up 5.5m out. Latest 'DX' G0KTN @ 145Km. 73 Eddie G3ZJO.

Eddie What type of antenna are you using on 474? Philip G4JVF

Thanks !

Same problem as I noticed and mentioned in an earlier post. At first I thought that when I had the 28Mhz PA problem that I might have caused some damage to the ATMEGA. 73 de Andy

I've captured it and uploaded it here: http://www.feek.co.uk/images/2013-05-23_13.51.57-20130523-135344.jpg 73 Keith.