开云体育

Eddie What type of antenna are you using on 474? Philip G4JVF

Thanks !

Same problem as I noticed and mentioned in an earlier post. At first I thought that when I had the 28Mhz PA problem that I might have caused some damage to the ATMEGA. 73 de Andy

I've captured it and uploaded it here: http://www.feek.co.uk/images/2013-05-23_13.51.57-20130523-135344.jpg 73 Keith.

Yep I see your Spots Barry 129Km. Thanks Eddie

Eddie the Dx is 129km - still getting good decodes. -- 73 Barry, G8AGN

Hi Andy Just the one and 5V, I am not a QRO merchant. :-) Eddie

Eddie I'm receiving you about -22/23 on 475702. -- 73 Barry, G8AGN

How many BS170 / supply volts are you using ? I'm hoping to box mine now in the next few days, now all my hardware is available and ready to use. 73 de Andy

QRPLabs This morning I got round to sorting my arrangement for using my external LPF's with the U2. I now have the possibility of output on any band except for the moment 136KHz. The 200mW of RF out

Hi Keith Can you give me a photo of how it looks with the digit missing off the right? Or, write out exactly the display, character by character? Then I can try to get it corrected/moved. 73 Hans

Ok Andy, Colin! Ok! I will add an indication that GPS lock has occurred! One more for the wish-list! 73 Hans G0UPL http://www.hanssummers.com

Hi Eddie That's an interesting request, and I can certainly see the use of it! I added it to the wish-list! 73 Hans G0UPL

Hi Hans, I've been doing some testing and changing the SPEED parameter so that my callsign fits nicely in ten minute frames - If I set speed to 10 then my callsign fits with 20 seconds to spare so

Mmmm, tried "all"? settings. freq stays at 125.000.000. Time does not get updated It seems to sulk with GPS on and do nothing. tried inverting and all pulse width up to 50%. GPS is GARMIN GPS16 LV

Also I forgot to add something regarding my original spectrogram tests. Whilst watching the signal when receiving only the two bit streams, the same could be heard on the receiver. It was just like

Well I know for a fact that I did have my own 28Mhz WSPR decoding at one point on whatever 10m random freq I chose for the test. Then I moved to another, and it all went skew whiff. I have no doubt

When entering Message Data it would be nice to have the right button (Scroll Mode) scroll through the alphabet A to Z then stop waiting for a press before scrolling again through the symbols to the <l

That sounds like a good idea to me, how about some 'square brackets' around the Locator i.e. in my case IO84 becomes [IO84]? 73, Colin M0XSD.

Experimenting with 15m today, I did have the start up problem (power and swr going full scale) but a couple of power on/off cycles cleared that up and I'm now getting some