开云体育

https://green-green-avk.github.io/AnotherTerm-docs/

have had success with "Another Terminal" android app for terminal access to QDX? and QMX 73

Hello, Just checked QMX schematic and it seems that KEY_DIT and KEY_DAH lines both have a 1n cap to ground (C218 and C220). Should these be higher value? Thing is, the glitches also appear in

I may have an extra as I messed up my first board on my QDX, and I'm assuming that's the same on all the QRP-Labs items....I can send it to you if that's the only thing you'd need to order

Mike, you're able to use the QMX via FT8CN? Please tell me or post a picture of your exact setup. I know just about everything is a workaround right now, but I'd like to copy it! My POTA is currently

It would be great if there was a way to set the time in the menu (like the QCX in menu 6.8). An addition of DT (DATE AND TIME) to the CAT commands would also be great. It has a very, very low

I would like to access the QMX with my Android phone via terminal. This is no problem under windows or Linux with putty. Android terminal programs, for example "Serial USB Terminal" recognise the

Bruce, the 60v bin select is labelled TN0106...JZ

So having speculatively bought some what tells me if they are rated 60V or 100V ?

Digital (ly temperature corrected) TCXOs can deliver better long term statistical results while using cheaper crystals so they are becoming the majority on the market Analogue correction is smoother

Done that too in my QCX Damion but keep in mind that, at least in the QCX, the dit and dah lines also are used for the serial programming of the ATmega328p. With a few caps across this lines the

All, If you're having issues with buggy cw on TX only (not practice), installing a couple of caps on the cw wires might help. I discovered that (QCX days) emitted RF seemed to be causing small

I'll try this however I'm getting glitches in practice mode as well as on air so doesn't seem to be an RF issue in my case.

Andrey, My tests https://sites.google.com/site/g4zfqradio/incircuitprogramatmel168#h.pbu1b1vv7jm6 the alternative I tested is probably not available but :- The QRP Labs TCXO is is very

Hi Andrey The link for the QRP Labs TCXO is https://shop.qrp-labs.com/tcxo - and it does not suffer jumps. 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl

Hi Bojan, I’m happy to hear the TN0110 FETs are working great! I was the one who found this device with a lot of google searches and vendor checks many moons ago. I’ve been following comments

Hello, It works fine without it, don't worry. I didn't install it on purpose, since I don't do much SSB and you can connect an external mic anyway. Regards, YO3GFH op. Adrian

i lost the electret mic somehow and am wondering if its ok to go ahead with assembly and applying power, etc without it until I find a replacement. will this one on Amazon

Yes, that looks like the same item as this answer </g/QRPLabs/message/113329>. Also note that Hans sells them in his spare parts section. - Sandy KB3EOF

I see that the SI5351a synth manual now specifically mentions FOX924B TCXO as having a problem with discrete frequency jumps. So I tested the frequency stability of that TCXO on my very fancy spectrum