开云体育

Same old questions about order status and delivery over and over again. I guess people think they are buying from Amazon. Well. they're not.?I think Hans should put up a description of his small

Andy, You got it.? Web browsers have been around since win95, every phone has one. The web version has a Wiki, and even ability to do look up, I use a unique solution rarely thought of...? A

Thanks Ton, you helped me get my QMX working on WSPR with that simple description

If it's an assembled unit if can track it on the order status page, by the position of your order number. If you chose FedEx as shipping you should get a notification email when it's on its

Unfortunately, as Allison is all too aware since he's a seasoned user of this group, this is too true. I've seen a months discussion and 200+ posts on a subject that ends in a solution. And then the

77424 is my order. No email when it shipped or if it shipped. It’s been almost 1 week. When should I bother you about it again? It would be nice if there was a way that I could get some sort of

I downgraded my Rev 4 to 1.07 and all bands are back.? Previously I only saw 1 band.? I'll check the voltages, but I may do nothing if all bands work as before on 1.07.

The QMX hardware already has the capability of modulating the amplitude of the output. Now it’s just a question of Hans getting a Round Tuit. Not like he has anything else to do. ? 73, Willie

Just a thought. Hows about creating an external high/low power switch in line with the DC cord ? It could switch between say 7.5v and 12v (or what ever, using either a fixed voltage regulator(s) or

Curt, Your experience is very similar to mine.? Blew finals in my QDX doing initial testing and accidentally transmitted on 30 meters with antenna SWR over 3:1, finals were gone.? I do same thing

Its been posted more times in the last year than memory allows usually at least once every month.? But email lists are infamous for short memory if any at all. Auto tuners while seeking a good match

I've had finals in the QDX go many times while using an auto tuner. ?It seems like the damage was cumulative. ?I was using an LDG tuner and also the Elecraft T1. ?After swapping finals in the QDX

Steve, Before surgery, I would try to move Q103 a little by heating up the Tab until the solder melts and push Q103 over a little by inserting a small flat blade screwdriver between the bodies of

On second thought, I think the better solution is to go ahead and shave off the part of the Q104 pad that extends under Q103, and externally complete that net with a jumper wire. Less risk of a short

Thanks Hans. With the SMPS boards removed I have a short between Vdd and GND which wasn't there before I powered up having checked continuity on the SMPS headers. Does this mean the MCU is dead?

Dale, Try searching for "10mm speaker" and you will find some, one example

Can you provide link to speaker? -- Dale Hardin KS4NS Elberta, AL

Robert, Yes that's the LM386 module I bought from Amazon. I didn't remove or replace the capacitor, but utilized it as the support for the control board with a plastic nut glued on the cap. Because

I've completed assembly of my first QMX kit. The instructions are extremely well thought out, and all went well. However, during the final inspection prior to applying power, the inspection step

I don’t remember which cap failed in the past. ?There are several connected to VDD. ?Most likely is an IC. ?I can look at it for you if you wish. ?I’m in QRZ for an address.