开云体育

Having made a few CW contacts with my QMX this afternoon, I decided to move to the "Digi" mode and tune the 41m BC band. It resolves AM BC stations very nicely indeed - bonus! I already have my Ham

Here is my QMX kit just used on holiday in Cyprus. On the lid is a 5m counterpoise, 3.5mm audio cable for key and 2.1mm cable for power. In main body, in th eleft hand vertical section, a homebrew

Yes, those first 400 or so had "numbers" associated with them. Unless that number is burnt into the eeprom and not changeable then it's hardly a proper serial number. I've built #6x and #38x AND #38x.

Well mine did have a number.....on the box when I got it at FDIM....which is (drum roll please): 100 es vy 73 de "Baab" w9ya

No. The first 400 or so kits came with Hans to the US and I don't think he took any back to Turkey. These kits don't really have serial numbers per se. -mike/w1mt

I'm gonna go out on a limb here and suggest that cross band is probably not supported. (Yet?) -mike/w1mt <anthonywalleysa@...> wrote:

Regarding this tone issue I mentioned - ?I managed to play around a little more with the QMX today, and after uploading FW 1_00_009 I did a factory reset just in case, and tried to replicate the

You'll notice that the article also approves of cootie keys, which preserve individual style with free left-right motion, while being much better ergonomically than the vertical pounding motion of

I hate to bother Hans, he’s got enough on his plate, but is the “300” written on the packing label of my QMX the serial number? 73 John G4YTJ

20m power: Compress L513 as much as possible or add a turn to it. Gave me about +1w on each of three QMX's so far. -mike/w1mt

Reporting on QMX #215. The build went tediously well – I had two errors, bad solder joint on L506 resulting in no power out on 80m, and one of the bent backward encoder pins that Hans is so fond of

You've got your *di-dit,* right, but your *dah-dah* needs to change to *da-dah* like your *di-dit*.

Sorry, that should be thanks Colin, not Keith. 73 John M0JBA

Thanks for that Keith. 73 John M0JBA

Thank you, Hans! Expecting an assembled radio from your team this week according to FedEx. Will be like Christmas in August. 72, Rhett KB4HG wrote:

Hi Chris, Likewise. I ran the tests and both boards check out. So on startup I'm left with a solid pop in the earphones on pressing the left encoder, about 170 mA of current from the 7 V supply, and

Using the print statement is one way to comment. -- Colin - K6JTH http://tangokeys.com

Mike, Did you try it? It is the way I use if I want to hear what a QDX is receiving. You hear what the QDX sends to the input of the digital program. There is no outgoing audio in a QDX, if there

As fate would have it, I received a shipping notice for my order on the same day I'm leaving for a holiday trip.? I discovered that I could set up a 14 day vacation hold in the Federal Express app.

73 Kees K5BCQ