开云体育

can anyone point me to a source? Thanks, Stan ak0b

Hi All, Thank you to all those that responded. It sounds like there is an interest in the idea and some people willing to contribute. I'm working on some more sample server software, and will then

Now I'm on air for a few days, I'm testing the station. Reception reports are welcome, you can e-mail me a screenshoot of the reception and other information about your radio station. I thank you very

Hi All, I am currently transmitting My call sign (VK5DJW) in QRSS3 from an inverted V dipole I set up the Hans Summers QRSS kit today using a calibrated frequency counter at work. it was a Racal Dana

Clayton, I downloaded the receiver project and it looks good, congratulations on your win. I have a few websites I look after although I have retired from full time work but there should be space

Sounds like a good idea in principle perhaps share some more info with us ?

It looks like I've set the world on fire - or at least a few Knights! Thanks for the feedback. To answer a few questions: The details of my receiver can be found in my design entry

Clayton VK1TKA/ZL3TKA I too have proposed new things for QRSS, only to find a strong view that "we don't do it that way" which resists change and new ideas. Your idea does have merit, and some

Hi Clayton, I think this is really an interesting thing to try and achieve. I am not on the air much now due to a shack/antenna/life reorganization but when i was it was always an exercise in

Hello Knights! I didn't get much response to my email last month, but I'll try another tact before giving up. For a while I've had an idea of developing a server system with remote 'thin' receivers

Hi everyone! Finally today on air, after Hans G0GPL kit 30m QRSS , and amended in accordance Aldo Iw2DZX I thank them both for the opportunity ' fun! My beacon 'set at the 10.140.04 Mhz frequency of

Hi All, I have stopped transmitting for the time being i need to do some adjustments to the setup. Thanks to those who tried -Dan

Apologies...It is a typo... I mean 10.140030 - 10.140040MHz -Dan

Hi Guys, In case any one is interested I am transmitting continuously QRSS3 callsign VK5DJW tonight on 10.0035MHz Power is about 100mW -Dan VK5DJW

Thanks ZL1UJG, -Dan VK5DJW

Hi, Its Murray Greenman ZL1BPU, who runs 100mW. Callsign he is using is ZL1EE.

If you have a look in the photo section under VK5DJW there is a capture pic... if it is a ZL1 I would like to know the power output :) -Dan VK5DJW

Hi, I have heard others mention that they had low power from their Hans Summers TX. Well one my fellow QRSSers in Hamilton has that exact same problem with his 30m one(after being modified to 12v PA

Hi, One of the fellow QRSS'ers in Hamilton while building the 80m TX, noticed a small problem. To achieve frequency he had to remove the inductor in series with the crystal, not unusual. He replaced

Dear all I have my 40m qrss beacon running now. Acording to my trusty meter, it is on 7.000.81 Any reports will be most welcome Thanks Tim VK4YEH