开云体育

Good morning, I'm almost done assembling an Ultimate QRSS kit for 40m and noticed that the assigned holes to insert the coils do not have solder pads. Is this normal or should I proceed and do a

QRSS Grabber Aggregator http://www.vk4yeh.com/qrss_grabber.htm la5vna Steinar

Rather than build a special oscillator circuit, I am planning to build the new UQRSS kit with a crystal socket and use that to do the penning adjustments. Since in TEST mode the kit works as a

"you and Hans need to know how much we appreciate the fun and challenge the kits have given us." Tony, I am 100% agree with you! LA5VNA S Den 28.08.2012 10:35, skrev TONY_VOLPE:

Steve I don't think you'll be able to pull the crystal that far. I do think Tony will be able to "Pen" it that far. FYI the page Tony refers to is http://www.hanssummers.com/penning 73 Hans

Hi all, Steve and I have components for another run of the "Ultimate QRSS" kit, please see http://www.hanssummers.com/shop Also we have a 160m version now available too (1.832MHz crystal). Steve is

Forty hours without intervention is pretty good David. I find mine is prone to go awry when the ambient temperature changes a lot. I think this is day three of more or less perfect operation for mine

Still plodding along here. Over 40hrs of continuous operation now with no problems. Should really update the power setting to show the real output power but don't want to take it off line. Tony -

I got mine here - he has two pairs left as of now: http://www.ebay.co.uk/itm/160734392460?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648#ht_1791wt_823 I was slightly wrong on the frequency but

Tony, You won't need to adjust the LPF values from what I'll specify. Or, hopefully anything else. ?22 for a custom crystal is daylight robbery. Where did you buy yours from and I'll see if I can

Well - I bought two crystals for 14.132 for about ?1.80 delivered and I am going to have a go at penning one of them down. It may be a long shot, but in his article on the subject, Hans managed to

Hi Tony, Thanks for the nice words. You will be pleased to know as soon as i have finished making up the new batch of kits I'll be testing the 20 meter one. But we only have crystals for 14.000,000

And you and Hans need to know how much we appreciate the fun and challenge the kits have given us. I can't wait to get started on the new one which will be put on 14.0971 MHz. Meanwhile, it was a

Hi Marc, Yes , you got me!! Tanks a lot for your picture ! https://dl.dropbox.com/u/16381257/YL3GU.jpg I hope it is ok for you that I post this answer on the groups LA5VNA S Den 27.08.2012

Guys, It is really nice for Hans and I to see the results of the hard work you put into getting the kits we produce on the air. It is so encouraging to see you all getting seen on grabbers and

Yes! :) https://dl.dropbox.com/u/16381257/IK1WVQ_10140__001.JPG Thanks to IK1WVQ Mauro for running the grabber! LA5VNA S Den 27.08.2012 16:53, skrev Steinar Aanesland:

Hi all, I can see a trace of me on http://www.stmb.it/grabber/ I have now change to qrss3. la5vna S Den 26.08.2012 22:14, skrev Steinar Aanesland:

Nice Idea. If this is implemented, it will give a more robust device for unattended or poorley monitored devices. 73 Alvey G4KSY

Agreed, that would be a great option to have Philip G4JVF

Gerard I confirm that the Ultimate QRSS kit does NOT transmit 6-character locators, only 4 are part of the standard WSPR encoding. 73 Hans G0UPL http://www.hanssummers.com reply : The locator is