开云体育

Hi Lou I didn't hear your beacon yet. Will keep trying. Some of those bugs you mention may already be solved. You are running 1.00b. The current version is 1.00e. But I will check them all

I have relayed your info to the 10m beacon spotters group. Maybe some will take a listen. https://groups.google.com/forum/#!forum/10mprop Jim,N2NXZ

Currently 24h attended CW beacon on 10149.00 kHz reception reports appreciated. Antenna up 9m broadside to Asia/Europe/S. America. Power about 3W output. Bug: in CW beacon mode (v. 1.00b) the clock

Hello Bill, A very good book, too, full of all you need to know to work MF and LF, it's been a Godsend to me, and Mike Dennison is a really kind and approachable gentleman on the LF forums

Hi Dave , its a book its in the ARRL store or Amazon. I thought it was a link also. Bill KN8DMK

Hello Chris, It turns out the HB9ASB amp is actually supposed to be class AB2 (linear) but mine is more efficient and runs cooler when the bias is set somewhat below the point of any static drain

Thank you Hans for your answer. That is good news. After trouble shooting more I'll? contact you. Carl

Hello Hans, Saturday, December 16, 2017 Would there be much interest in you putting a few spare case screws in with U3S cases? I just spent an hour looking for one that presumably fancied a

Hello Paul, Sunday, December 17, 2017 Great to hear you are up and running. (Even though on "VHF" ;)) May I ask what you had to do to get the Class E amp working correctly, i recall

Hello Paul, Sunday, December 17, 2017 Great to hear you are up and running! (Even though on " -- Best regards, Chris Wilson (2E0ILY)

If one mosfet has failed and the load has remained the same then surely the 2 mosfets left are now carrying 1.5 times the load they carried before? That would mean that either the power would remain

Hum, groups.io rejects my email reply. Copy here Mike, Was that because there was a high SWR? If Q1 blew what about Q2, 3? They are all in parallel and if one goes then there's a good chance they

Office Max or Office Depot are a couple other choices to get it printed. Also, before you start building do an inventory of all your parts. Mine was missing some.

Greetings, This is my first post since joining the group. I recently received SN# 1080 and 1081, 40 and 20M QCX rigs. I started with the 40M first and it went together with no issues. Alignment went

Dear True Blue, It is my understanding that the power parameter?is not used in QRSS Modes at all.? So it doesn't matter what power parameter you use in FSKCW or DFCW.? We don't send or record the

Dave - apologies -?its a book from the RSGB:? ?Dennison, Mike, G3XDV, "LF Today:?? A guide to success on the bands below 1MHz,", RSGB, 2013. I ordered it from ARRL. Also 472khz.org is

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* Groups_IO Message control_v2.pdf *Uploaded By:*

My U3S with a slightly modified HB9ASB LF/MF amp (featured on QRP Labs web site) is happily running on 630m WSPR right now, putting out about 23 watts (2W EIRP). 73, Paul N1BUG

The U3S is quite popular among those active on the 630m band. In fact, a single U3S can be used in three different ways to put a signal on the band: * A dedicated U3S with 630m LP filter * An 80m U3S

Dave and Bill where is the group (site) called "LF Today"? A search didn't satisfy the question. dave W1VR