开云体育

Nice setups. I enjoy seeing how others do it. Attached is my basic setup - from a POTA outing - but it all comes out of my backpack which I use for SOTA as well. I usually use an 84' EFRW w/ 17'

FW006 Win 11 WSJTX/FLrig working for over an hour now using 2 com ports! (Putty cat mon). No joy on 3 com ports! setting!

No offense to Tony, but I would advise against re-assigning "In Use" port numbers. I've gotten my Windows machine into a world of USB pain doing that. Unless you know with absolute certainty that the

Same result as before. That is why I dumped values for Hans, so he can see what Win 11 is recognizing it as. There must be some difference between Win 10 and Win 11 - his test system is Win 10. Erik

Ok, weirdness prevails.. Q102 and D109 did fix the initial problem and it is up and running. Mostly When I was troubleshooting why I wasn't getting 3.3v, I pressed the scope probe onto the drain of

Sorry Erik, I didn't read it carefully. If you did not already, try changing the port and rebooting, both the PC and the QMX. Tony AD0VC ________________________________ Sent: Friday, April 25, 2025

I am on an up to date Windows 10 machine. Three COM ports worked in 004. Skipped 005 1 COM port worked on 006 Changed menu to 3 COM ports, now I have no COM ports. Set to 2 COM ports and I have

Tony, See my description, I did change a port as you suggested, and the "changed" port would not work. Erik - AD7OV

If the device GUID is the same, isn't Windows likely to report it as the 'same' device (and possibly merge it)? ;-) I'm not at all familiar with the protocols at play here, so I'm talking out of

Will QRP labs be at Hamvention in Ohio? If so, what booth/building please. Will you have built kits (QMX+) on hand for sale? Thanks and ‘73 Jim WX8J

Windows will do this sometimes. You have to force the second com port to another port. In device manager right click on the port you want to change. Select "properties", then "port settings", and then

Just a quick test, it's 1am ;) 1 port configuration looks ok in Device Manager, Audio Devices and 1 COM Port 2 port configuration looks ok in Device Manager, Audio Devices and 2 COM Ports 3 port

Windows: Edition ? ?Windows 11 Pro Version ? ?24H2 Installed on ? ??11/?18/?2024 OS build ? ?26100.3775 Experience ? ?Windows Feature Experience Pack 1000.26100.66.0 Installed QMX

Hi Hans, the new calib feature is working much better! Thank you! 1. My QMX+ on had problems on 80m on 004 => on 005 it's working completely*. (*I didn't try 160m) 2. My QMX 80-20m had only a few

One more information: Config with 1 Port Starting PuTTY CAT command FA; brings F as reaction and nothing more no reaction after typing more commands Could it be something like a hand shake

Hi Scott. Don't do any changes to T-1. Photo shows it to be wound perfectly ... that is, if you intended to wind it for 40 meters... You should first verify you installed the correct capacitor at C5

Hello Hans, thanks for so quick response. It's much better but not 100%. Config 1 port: The device manager looks fine, 1 COM and 1 Audio PuTTY starts now - ok! ENTER into Putty brings no reaction -

Serial port status with 1_01_006 on my Win10 home machine: - selecting 1 port works fine (presents as COM10) - selecting 2 ports work fine (present as COM10, COM12) - selecting 3 ports does not work:

This is how I tune but I find it difficult tuning while watching digits rapidly change. It would be great if there was an option to show the SWR on a bar graph of some sort.

Here is the successful one. Tony AD0VC ________________________________ Sent: Friday, April 25, 2025 2:46 PM To: [email protected] <[email protected]> Subject: Re: [QRPLabs] #qmx SSB Firmware beta