开云体育

The solution is simple, upgrade to Linux, Jan. Diarmuid EI4LF [email protected]> wrote:

Hi Jan It's done on QDX already and I intend to do it on QMX too. It only works on Linux. On Windows, the OS ignores the name you give it and always gets called COM4, COM5 etc. What happens on Mac

Is it at all possible to set up virtual COM ports so that they will have a consistent name when (re)connecting? I've found that under MacOSX, the name changes every time you plug it in. This makes it

Calibration of QMX+ completed.? Results below: (three QMXs to be tested) Some phases stopped early 160m? 1100 80m? ?1300 60m? 2500 40m 2600 30m 2600 20m 2500 17m 700 15m 700 12m 1500 10m 2300 6m

What would be the symptoms if this component was failed? I set the QMX aside for now to take a break. Troubleshooting this thing all day made me tired. Just to know for when I pick it back up, in case

Hi Chris I would call it Beta until the SSB phase distortion calibration is more Please can you try it in this new beta version and let me know what you find? 73 Hans

I would call it Beta until the SSB phase distortion calibration is more robust. Chris

Glad you found the culprit, it’s possible that sharp edges in the core damaged the insulation on the wire. The component most as risk from that short is Q507. 73 Nick G0OQK

Yes!! That fixed it. It powers on now :))) Hopefully the high current didn't fry anything else. I wonder what happened with the transformer.. I wound one exactly the same for QDX the other day and it

Yesterday I decided to venture into the latest beta release of QMX SSB. I'm nearly 100% CW op, so this was mostly done out of curiosity. I'm a big fan of Hans and QRPLab, and have been impressed with

Hi all I updated the SSB beta testing webpage of the brave, here: https://qrp-labs.com/qmxp/ssbbeta.html and released firmware version 1_01_004 to it. I did not solve problems with SSB phase

Removed one leg from L502 and still had short to ground on both primary and secondary of the T501. I removed it and currently rewinding.

I feel the same.? With QRP I find it necessary to switch transmit slots often (since there's always someone who can't hear you and chooses to transmit in your slot).? And finding a new slot in FT8CN

Jamie, glad to hear? that all went well. If I remember correctly, you installed C17 with a switch to bypass it.? Whenever C17 is switched inline, RF detection will be active and work without a PTT

That should have read ‘short between primary AND secondary of T501’

A short between the primary or secondary of T501 or Q507 is shorted and the fault is elsewhere. Lifting one end of L502 and measuring continuity to ground, as suggested will point you in the correct

Nate, I have used an Android phone with FT8CN and a QDX for about a dozen POTA activations. I'd call it workable, but not really enjoyable. But I'm not about to lug a laptop or tablet into the

I’d also like a full kit if/when you do an arcing group buy. My email is good on QRZ. BrianB N6CVO N6CVO@arr…..

What band is this?

L502 has continuity to ground. I've removed the finals too. The short is still there on 12v.