开云体育

Don't remove the powerpoles from that lead, add Powerpole connectors to your battery, and everything else that needs or uses low voltage power.? Pairs of connectors can be assembled handed and so

Here's a barrel jack, 12awg: https://a.co/d/6szucWi Here's a 16awg in line barrel fuse : https://a.co/d/0OOfwx6 I know their not 18awg,and that you might not want to buy it off Amazon, but at the

On 4/11/25 I had a CW practice / rag chew session on 30 meters. I worked five stations: Date / Time Call Bnd Frequency Mode Power Rec Snt SPC# Name Comments Off 4/11/2025

It is infinitely worth your time to learn to solder and/or crimp, and to go ahead and get the equipment to do so. It's a small investment and if your doing ham and/or electronics projects you will

The suggestion on adding a low value (100-1000 pF) capacitor in parallel with the 20-1000 uF bypass capacitors if the best answer. It has to do with the frequency response of the capacitors and their

Weird, mine was not showing the SWR or power output bars, but a couple of days later, now it is! Happy ending for me.

Hello Hans! I haven't spoken with you since Hamvention several years ago. It occurs only 20 miles from my house. Nice to encounter you again? - you are doing amazing work. What I would like to see

I always parallel a 100- or 1000pF cap with the bulk bypass for additional RF bypassing/filtering.? Those larger values do not work effectively at higher frequencies. 73, Don N2VGU

I am using a Drok buck converter from Amazon. DROK DC Buck Converter: https://a.co/d/g8V9ARz It works great, and no noise. I set it at 11.9 volts and just leave it there. I put anderson powerpole

Hi Bruce and other tone on the band friends, I have made no progress other than to speculate that replacing the 74CBT3251 'front end' chip might be an option.? Since the tones disappeared when IC402

Hello Anders

Hello Bill Thanks for the feedback. I would love to hear from Braden too. When not liking the way something works, one should be able to propose an improved alternative. Yes this is exactly the

Hi all, I'm a new ham trying to build a power supply cable like this for my QDX or QMX+ to use my existing battery in the field: 12.8V LiFePO4 battery (

Hans, Since you asked... Note: For this discussion, I interchange the terms CW offset and CW tone...sorry purists. From the user perspective, I've found most other radios have you set

Marek, I guess now there are three possible places for a fault: * LCD module * Contakt from controller I/O via the mainboard to the connector * somewhere an unwanted contact / resistance only in

The 78/79 hundred families of regulators expect bypassing on both input and output sides of the regulator.Look at the data sheet for recommended values. Typically, 3.3uf and 0.1 or 0.01uf on the

I would be grateful if smb can explain in detail what I need to do send e-mails threw QMX. I have no experience with Winlink and limited experience with FT8 data transfer. I have tablet PC (Win 8)

Works great (mini PC): https://amzn.to/4jymp3P -- John AE5X https://ae5x.blogspot.com

Jerry, this is an idea that has been floating around in my head. Some folks like the UI of the TR-45 or the K2. With CAT (and eventually BASIC scripting), those UI's and most of their features could

Thanks for the replies. I open a ticket w QRP LAbs and Hans responded that he is sending a new unit. He agrees something is amiss with this one. He indicated he will pick up the old unit when he is