开云体育

Hi Hans I worked in software development for over 40 years for both UK and US companies, and I found that the big difference between the UK and the USA was "software engineering" vs "application

Erik, I'm looking for the element and the cable jack, how can I contact you? John

Also having this issue, but my frequency center seems to be ok, and is at default: Other

I am however getting good audio reports hunting POTA stations. Jim AC9YY

Thanks so much Evan. You made my day. It works! Appreciate the tip dd

Windows 11 has a "listen" feature that can be turned on for audio input devices.? Here is a screenshot of where to find it: You can get the first screen by right-clicking the speaker icon in the

Hi all I've just got a QDX up and running and it works great. Good signal getting to WSJTX and decoding properly. Is it possible to monitor the audio signal coming from the QDX? Searching this

Hello, I've just finished building my QMX+ and when I go into the diagnostic screen, I noticed that the "Right btn:" Is indicating "Press" at all times. When I press any of the other buttons it moves

Good to know, thank you. Hopefully Hans can reproduce it also. BTW, In WSJTX, I can't select the QMX as a rig type without crashing WSJTX. I have to use QCX/QDX. In JTDX I can select QMX OK. Just

Yes I can duplicate this behavior in wsjtx. Digi mode works fine.? Switch to USB mode I get one good transmit then out just goes BLIP (keys up and unkeys for a microsecond) every time? after that.

I'm not sure if it's a coincidence, but the receive Mux chips (IC402 and IC403 on the diagrams) on my unit also died when trying the new firmware. Agreed that it would like Jeff is the right person

Reloading the version 3 software also does not correct this.? VFO A is now basically disabled as when VFO A is selected the QMX only transmits on the Band Configuration Frequency center.? I don't

Martin, my setup uses Ham Radio Deluxe as the primary logger.? WSJT-X uses Ham Radio Deluxe as the rig in its settings.? All of its communication flows through the logger first.

Anybody else able to run FT8 in USB mode? If I have USB mode selected, I can only do one CQ transmission. After the first one, subsequent ones do not produce RF. Restarting JTDX/WSJTX doesn't fix it.

Thank you Stan, I fiddled with it last night and had trouble with Putty connection to the right. This afternoon I was using win link and it doesn't seem to get beyond speed level 5, then it falls

I am running 1_01_003 and see similar signals extending well beyond my base frequency, maybe a couple of 100 KHz on my TinySA as well. I am using 60 DB of attenuation into the TinySA. It seems like

I just got a Mini for 20 meters finished. I knew it was small but it’s much smaller than anticipated. Worked several stations and had some into France on Reverse Beacon. Unfortunately it was 2 am

I figured out apparently why this is happening.? ?Looking at my Band Configuration settings I had accidently got a zero in the Frequency center setting for 20 meters.? After I corrected this to

Here's the tiny mic that I've been using with my (tr)USDX and now the QMX. It's really simple to put together - I took an old mobile phone headphone that had an in-line mic and push-switch and simply

Running SSB version 3.? On 20 meters if I tune from VFO B it tunes on the correct frequency.? If I? switch to VFO A it tunes on the frequency that is the Frequency center defined in Band