开云体育

For reasons best known only to itself, Win 10 didn't do any patching even though it's been years since I used it. And it even seemed to boot in only about 7 minutes which is much faster than I recall.

I meant that I just used PC speakerphone - air - QMX microphone instead of USB cable to transfer audio from PC to QMX ))

We will hear from you in a few days after it finishes patching...? ;-)

I used USBTreeView to look at the QMX USB port with 004 and 005 installed. In case it might be of use, I attached the output as two files, one for 004 and one for

Hi Matti > Could it be that in Windows the data and command endpoints must be No. Well yes... But with the COM ports = 1 setting it is supposed to replicate the precious situation. Anyway I found a

Hi Tony Well, for fun, I reinstalled 005 and ran the calibration from the front A problem is that everyone's machine will be slightly different. When I get the next beta out and it works on Windows

Well, for fun, I reinstalled 005 and ran the calibration from the front panel. Phase works better but I still have one (30 Meters) that does not complete. I went back to 004 so that I could look at

Could it be that in Windows the data and command endpoints must be allocated pairwise? Or Windows requires that command endpoints must exist even if not used. -- 73 Matti OH6BEX

yes, I'm sure that is the case. Must have happened during the factory reset just as power dropped showing a blank LCD. I've ordered another IC2. Jeremy

“Use original IC” usually means that IC2 lost its EEPROM file. You may have to get a new chip to fix it. Sorry… Ron [email protected]> wrote:

Miguel, thanks for the tip on using Voicemeeter to fix the USB volume. For some reason the VARA-HF modem software does not put full-scale audio into the QMX USB sound device (at least in

Nice.? I have had my QMX out for several SOTAs this year.? Mostly work CW.? Here is my setup.

First, make sure the PTT is working. - put qmx in digi mode, on vfo A - press the flrig PTT button, and see if a dot appears under the A while PTT is on - that means PTT is working - if not working,

Hi Ludwig I agree, something must be amiss. But somehow Linux is making sense of it and Windows isn't! Don't worry, I'll find it! George, QMX is already a powered hub, in effect. Cascading hubs

Hi there, Would a powered USB hub, be practical or does that add more issues? Thank you, George K3GK

One more information: For FW 003 also a working composite device with the same VID and PID is shown. So both the composite device and the underlaying device was found. For FW 005 only the composite

I have the same problem (Windows 11 PRO)

One more information: When QMX is on the device manager it shows a non working USB composite device (translated from German). The Hardware IDs

Yeah good question, Ludwig. I didn't think there was any difference. Mode 1 (1 serial port) in 005 is supposed to be exactly like 003. Just Audio + Serial and no change. I will have to investigate...

The same (?) problem here. After loading FW 005, restart, Menu ... USB serial ports 1, QMX off - on, check if 'USB serial ports 1' --> device manager shows no related COM-port and no related audio