开云体育

Cotton shirts will shrink if they are exposed to high temperatures. Dryers are the primary culprit; if you line dry your shirt or use a lower temperature in the dryer it should not shrink much. The

You can look for your order on this list. https://qrp-labs.com/qdx/qdxus.html Colin - K6JTH

I see. I have a Zen book which is a fairly slick computer, but it had a rather insentitive and balky touchpad, which I replaced. That improved things remarkably but did not make them quite as good as

A few weeks ago shipping to USA was "unknown".? Has it been fixed or closer? 73, steve WB3LGC

It is not the QDX that creates the problem. The QDX has a 50 Ohm antenna connection like all other transceivers. It is the antenna feed line with common mode radiation that causes the problem. - Make

Is that the + version? Ted W7PO

I've made a great multiband qcx. Starting with my 20m rig I considered what made it band specific and how to make it work for 20m/40m. The 20m receiver works fine on 40m with almost no loss of

Hello JP Sorry I am so far behind on emails and helpdesk tickets... The mug does have an issue where the ink appears to start to QSY and QSB, in a dishwasher. I have not seen any issue with mugs

If I measure my QDX Rev 1 on a TinySA on 20m it doesn't appear to show anything of significance around 1MHz of the signal. setup was running a 6.5v (should be about 1W out or less) on a QDX built for

Don't you guys know that you're NEVER supposed to wash a coffee cup? It ruins the flavor! Mike WM4B

Thanks Dean, I'll wait for the mug firmware update to fix the bleeding issue!

Just waiting for v2.0 mug with new smartpaint firmware hi.

I don't have a dishwasher here and the qrplabs mug still has paint run!! Bit like QRSS...? Still readable by those in the know :)

I've had a few failures that I think are related to Windows 10 doing something with the sound board. Maybe some kind of Windows Update Notice. I'm not sure how this borrowed PC (GB-BXi7-4770R) set up

I jokingly opened a ticket with Qrp-Labs a long while ago about the writing on cup bleeding and more importantly the shirts should NEVER see water OR a hot clothes dryer. My shirt which was XL, now

Not so. QCX plus uses 28AWG for all toroidal. Gary W0CKI

I do indeed have the same issue when I allow any of my radios to receive continuous over night (or multiple days). The issue has been observed on the QDX, QCX mini, QCX+, FT991a, and a FTDX10. I have

i've been out of town for a couple weeks, so have not laid eyes on my qrp labs cup for awhile, but I don't recall any dishwasher fade thus far. But sounds like I need to not tempt fate any longer, and

It is interesting to see both places use the exact same datasheet that say 500ma. Dean KC9REN

Hi Kevin, You will notice the wires diameter are different. This is stated in the manual. The two different wires are wound onto different toroids. I hope this helps with the wires. I can't comment on