开云体育

Perhaps I did not include enough detail? I'm referring to C106 and C107. The parts supplied in Rev 1 were rated at 6V. The parts supplied in later revs were rated at 10V. Hans wrote a very detailed

Hiroki, If you will go to Dayton, Hans has got Mustafa's battery board installed in his QMX+, I am told. 12 May 2025 Pzt 16:15 tarihinde ta2rx bekir via groups.io <ta2rx.bekir= [email protected]>

So, replying to my own message. I ran beacon mode this morning and it failed within 2 hours when spots ceased.. Power cycling the rig resolved the problem for a while until it failed again around 2

https://github.com/laxdronum/QMX-Plus-Battery-and-Audio-Board 12 May 2025 Pzt 15:11 tarihinde Hirokik via groups.io <hirokik= [email protected]> ?unu yazd?:

I agree Ed. Not funny.

Has anyone installed a rechargeable battery in the QMX+? If so, would you share the details, such as what brand of battery and how you wired it inside the QMX+ case? Thanks. Hiroki AH6CY

There is already a CAT command: TM: Get/Set Real time clock time Set: Sets the real time clock. Format is Tmhhmmss; for example to set the real time clock to 13:55:32, send CAT command “TM135532;”

It's not just a IO91 problem, I have it in IO93. 73 John M0JBA [email protected]> wrote:

Hi all The beacon function in QMX is very old, it originated in the Ultimate WSPR kit, which became Ultimate2, then Ultimate3, then (10 years ago) the Ultimate3S (a.k.a. U3S) see

I have had the same issue, with a QMX+ and QLG3 combination and have stopped using beacon mode because of it. The setup will typically behave well for a couple of hours before I start to see random

Last night while playing with my qmx the receiver went deaf. ?This happened after txing on ssb with IQ mode on and panadapter open. ?I was using a mic connected to the radio. ?The S meter with

Funny, I wish the QMX could set it's clock to the GPS dongle that is part of all my radio computer setups! But I like your idea too. I do enjoy the ZIN function of my Yaesu radios, just hit the button

Hans, while on this subject, is there any reason the WSPR band hopping as on the U3S could not be incorporated on the QMX+? I really use that feature a lot. I wondered as you have the ‘Preset’

I'd suggest a program such as PuTTY rather than PowerShell. For starters, it's got a GUI which makes it a lot easier to create connections and save presets with the appropriate settings without having

Yes, the QDM (and QDX) only enumerate once in Windows. A power cycle is required. I do not think this is emphasised enough. 73 Alan G4ZFQ

I built a version 1 QMX+ transceiver which I really like. It seems to work well on the channels I use which is 40-20-15-10M. I recently updated the firmware to version 1_02_000 and I am impressed with

Hans Just finished the QMX 15-60m Kit build successfully and I just wanted to say thank you. ?Your documentation is excellent and your videos are very helpful as well. 73 John N?IB

Thanks John. Almost... I fly this evening. Land in Chicago Tuesday morning US time 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl [email protected]> wrote:

In the us look at the toroid king. https://kitsandparts.com/ I have purchased countless times from here. ?But there is nothing wrong with gluing them. ?Use a good ca from the hobby store. ?That’s

Good evening all, I wanted to report a minor bug I noticed on the new 1.02.00 firmware for my QMX. When I am on the 60m band I can tune between the 5 60m channels which is very handy.? However, if I