开云体育

I need display and its mounting board for qmx. ?Is this offered as spare parts. ? I see it for qcx. ?I have the mid version of qmx. KJ5IVB ….Bill

yes, external mic

With this release - still external microphone must used - right? -- 73, Sardar (AC8L, 4K6SA, VA3DUA).

That's the most clever I have seen yet! Thanks for sharing!

How about an old lineman test key with a built in mic? Quick switch from CW to SSB just by changing the mode and holding the key up like a mic!

Just tried this and was able to run calibration from the front panel with USB disconnected. Interesting results. My QMX+ has TN0110 finals so I was expecting possible issues with calibration. When I

My workbench this weekend, assembling them as fast as the printer can print them:

A work in progress... It uses the front panel from a QCX.? The controller is a 68HC11 SBC from Axiom.? My daughter used the board for a collage course and gave it to me many years ago.

This radio is a solar powered WSPR transmitter.? It has a QRP labs arduino shield, PIC16F690 controller, a dds module, a high side switch to control power to the transmitter parts.? It uses a WWVB

Brein, Your settings are nearly identical with what I arrived at except that I did engage EQ, but it isn't really necessary unless you change the TX filter upper and lower limits. With a flat

I tried to use up some parts on hand for projects this winter.? This radio has a QRP-Labs arduino shield, a QRP-Labs receiver module, Teensy LC controller, Nokia display, Rtc clock for time keeping,

Edit: Maybe I am just overloading the 6400M front end, but my Hermes Lite 2 doesn't sound like this when I listen to it in the same way.? Did try 6400M TX to QMX, SSB RX in the QMX sounds great.

Hi all I updated the SSB beta testing webpage of the brave, here: https://qrp-labs.com/qmxp/ssbbeta.html and released firmware version 1_01_003 to it. These are the changes: 1. Bug fix: Initial

Hi Group, I took the plunge today and installed the second SSB beta FW on my 80-20m QMX.? Did the calibration and tried it out.? While I do hear myself well on my nearby Flex 6400M with no antenna,

Hi, Thanks for sharing your audio setup. I adjusted mine and sounds better. Before I just made my 1st SSB QMX+ QSO. Portugal - Slovenia. With 3W on 17M, a long wire, 9:1 UNUN and an ATU-100 tuner,

Thanks, I suspected as much. Currently my BPF sweeps are all what the manual calls acceptable, but none of them are really centered on the bands in question. In fact all of them are centered below

TNX I will! Mike Krieger [email protected]> wrote:

With a little testing, I see that JS8call, with the radio mode set to "Data/Pkt", will use Digi mode on the QMX if you manually set QMX to digi mode.? It for some reason does not seem to ever send

C'mon in Mike, the waters fine!? ;-) 73, Robert, WA2T

No calibration is needed to listen to SSB. It isn't really needed to transmit SSB either. Better performance for TX if you calibrate. Tony AD0VC ________________________________ Sent: Friday, March