开云体育

Hi Richard, Following sketch file needs GPS fix even for JOIN request due to geofencing: https://github.com/lightaprs/LightTracker-1.0/tree/main/lorawan-otaa-pico-balloon-tracker But the following

Looks like my local hotspots are offline My tbeam tracker is connecting to a hotspot some 10 km away/ may be out of range for the qrp tracker at ground level Would be nice to have a GPS lock led but

I had just completed a QCX Plus 40M build and got the power up around 3W. I worked K0FHGin the 13:00 window who was QRP, but not using a QCX. I did not try any others, as I was eager to finish

Hi Alan Let me know how it works out for you. There is a 12kHz offset applied because the QDX implements a software defined superhet SDR with 12kHz IF. As I discussed in the technical explanation in

TNX for the work to bring the addition of raw I/Q Alan

Hi Richard, Which sketch file did you upload ? Have you checked the Arduino Serial Monitor ? <Fairman.richard@...> wrote: -- Mustafa Tan https://picoballoon.ist

My tbeam tracker now showing on helium but qrp tracker not showing. its been outside with clear view of sky for over 30 mins Any ideas Ill keep trying regards r

Hi Richard, Can you share the name of the hotspot or the link. Let me check if the hotspot is operational. <Fairman.richard@...> wrote: -- Mustafa Tan https://picoballoon.ist

Hi Hans, thanks for all that you do. I know that we don’t get to see the half of it but you sure allow us to have more fun in this hobby than we might have otherwise not been able to enjoy. Curt

Not sure if helium is down or just my local Helium hotspot My Qrp tracker is showing no data on console or even my existing tbeam tracker that has gps lock

Hi all The QDX manual has been finalized (previous publication was a draft). The final version includes all corrections readers have notified me of (thank you very much everyone). The manual has been

Hi all QDX firmware version 1_01 has now been released and can be downloaded from the QDX web page http://qrp-labs.com/qdx - please refer to the QDX manual for instructions on how to update the

Hi all Certain US orders are being shipped from our US stock and are being handled in chronological order of placement. These have been pre-shipped to US via FedEx and will now reach you via USPS

Frequency locking the U3S's clock oscillator: My first U3S required an amplifier after the TCXO to boost it to a level detectable by the MCU's clock input (see prior posts in this thread.? I'm happy

I've used a FT450 and never saw under 1A RX.? Not that that's, bad its really good. The lowest current HF 100W radios I have are analong, Tentec Triton at 250ma (dial lights off), and Atlas 210X

Zoran - If you look back through this thread (and related threads, if I recall correctly), while the TS-480 N1MM+ setting seems to work for some QCX+ users, it doesn't work for all.? The solution is

Hi Hans, Did you have time to resolve the issue with N1MM logger? On firmware 1.07a issue is also present. After some period of time of polling from N1MM logger, QCX stops responding. Probably, the

Nothing heard here yet about shipment. But it's possible that most of the US orders are being sent across the pond in bulk and will be shipped from the US when that shipment gets here. Most of the

Mark, My QDX order number is 49977. I have not gotten my shipped notice...it is still completed status. I think Hans said they would not be going in order number status necessarily. Waiting patiently

Received my shipping notice this morning.? Order #500046.