开云体育

Is this a Mini? If so, be VERY careful with wiring and using the extender, because it carries 12V for the display. If you accidentally short the 12v pin against an adjacent pin, it will almost

Well , Crap!!! I have not used my new little QCX+ 40M in two weeks. Just connected it to my regular trusty power supply and a proven antenna....and this is all I get. No display, no menu, no

Syd that short length of wire will make no difference. Make sure you have good connections and all the pins go to the correct other end points. It will work. I've extended these things 10" away with

Syd, the 20 meter filter almost always needs L3 to be one or two turns less than specified and expanded somewhat. You can verify this by expanding the turns on L3 fully and if the power is still

QDX in I/Q mode (new firmware) Receiving 24bit AM, LSB, USB, CW, FM I used HDSDR For CAT control OmniRig.

I think I was done with checkout about 2.5 minutes in. I was hoping one of the receipts (QRP Labs and PayPal) would say exactly when because it would be interesting in a useless sort of way, but they

I jury rigged 2 headers, male and female, together 3 inches apart so I could take the display off the main board and still see it while no longer attached to the main board and monkeying with the LP

I have two kits (20m & 40m) that need the band pass filters aligned. Hans's tutorial on aligning this section by compressing and decompressing the inductor turns to figure out how many turns to add or

LOL! Took me a while… server kept crashing on me. Probably 8 minutes in. Mike WM4B Sent: Wednesday, October 27, 2021 6:11 PM To: [email protected] Subject: Re: [QRPLabs] QDX Same here. 50001. That

Same here. 50001. That what I get for all my "constructive criticism" in the past I suppose! :). Still good news though. How many seconds after 1800z were you again? :) Fred W0FMS

Hey… you cut the line! ;>) Order #49980 and not a peep! Mike WM4B Sent: Wednesday, October 27, 2021 5:34 PM To: [email protected] Subject: Re: [QRPLabs] QDX Just got ship notification this morning.

Just got ship notification this morning. Order #50150. Says it will be here friday LOL! 73 -Mike

Hi Bruce, Thank you for the advice. Now, I am with this option for a while and there is no issues with polling, hope will last. Not very responsive, but it works. Thanks, Zoran Z32ZZZ

I have been using this service for years.? It not only tells you about packages you are receiving, but provides an image of all normal-sized mail, like mail in the regular-sized envelopes and

Thanks, Hans!? BTW, for those in the US who really want a tracking number the USPS will notify you of ANY package on its way to you if you sign up for an account (and validate it) and enable that

Hi Richard, Following sketch file needs GPS fix even for JOIN request due to geofencing: https://github.com/lightaprs/LightTracker-1.0/tree/main/lorawan-otaa-pico-balloon-tracker But the following

Looks like my local hotspots are offline My tbeam tracker is connecting to a hotspot some 10 km away/ may be out of range for the qrp tracker at ground level Would be nice to have a GPS lock led but

I had just completed a QCX Plus 40M build and got the power up around 3W. I worked K0FHGin the 13:00 window who was QRP, but not using a QCX. I did not try any others, as I was eager to finish

Hi Alan Let me know how it works out for you. There is a 12kHz offset applied because the QDX implements a software defined superhet SDR with 12kHz IF. As I discussed in the technical explanation in

TNX for the work to bring the addition of raw I/Q Alan