开云体育

Sorry Hans

?

To be a bit more specific, the problem is that the QDX won't go into TX when just using WSJT-X, when the PTT is clicked in the WSJT-X RADIO settings window, so the other software is irrelevant to the problem but maybe connected?

?

When?when the PTT is clicked in the WSJT-X RADIO settings window,?the QDX LED has just 1 flash, running the .c firmware

?

73

?

Ian G4GIR

?

?

?

----- Original Message -----

From: Ian G4GIR via groups.io <i.frith@...>

Reply-To: <[email protected]>

To: <[email protected]>

Sent: 12/11/2021 20:52:28

Subject: Re: [QRPLabs] CAT Problem maybe?

---

Thank's Hans I will go through that.

?

But could you just check the Radio settings in WSJT-X?to see if QDX transmits when you click PTT?

?

73

?

Ian

?

----- Original Message -----

From: Hans Summers <hans.summers@...>

Reply-To: <[email protected]>

To: <[email protected]>

Sent: 12/11/2021 20:44:11

Subject: Re: [QRPLabs] CAT Problem maybe?

---

Hi Ian?

I don't know anything about those softwares or the answer to your problem.?

But... If you want to check if QDX is asked a CAT command which it doesn't understand, the QDX log file is intended precisely for this purpose. So open up a terminal emulator and enable logging of errors. Any CAT commands which QDX receives but can't understand, it will log it in the error log. After trying all the things that don't work... You reconnect to the terminal emulator and take a look at the log file to see what happened. Then tell me and I can add support for any missing CAT commands.?

73 Hans G0UPL

http://qrp-labs.com

-------- Original message --------
From: "Ian G4GIR via groups.io" <i.frith@...>
Date: Fri, Nov 12, 2021, 10:32 PM
To: [email protected]
Subject: [QRPLabs] CAT Problem maybe?

Hi all,

?

Just finished the QDX construction, no problems at all apart from only getting 4 Watts out on all bands, guess the other watt has been slated for the Angels Share (JD).

?

However, I am trying to use QDX with Logger 32, which can log from JTDX or WSJT-X.

?

I want to use the cherry picker mode in Logger 32 which isn't working. When I say it isn't working, I mean JTDX won't go into TX when told to by Logger 32.

?

I don't believe it is a Logger 32 problem.

?

When using WSJT-X or JTDX stand alone, I set the radio settings to the QDX requirements, click the TEST button which comes back GREEN, then click the PTT button but the QDX doesn't go in to TX.

?

But when using WSJT-X and JTDX calling CQ or answering CQ's the PTT works fine.

?

Could this be a CAT Command problem?

?

73

?

Ian G4GIR

?

?