Hi Colin,
Yeah I got sway with it on one, but not the other. Just a bit too
much plating in the whole to allow it to fit.
Using 0.5mm wire is nicer though. It does allow quite a bit more
tensile strength to hold the toroids in place.
73 de Andy
toggle quoted message
Show quoted text
--- In QRPLabs@..., "Colin XSD" <m0xsd@...> wrote:
Hi Andy,
If it is any help, I have managed to used 0.5mm Enamelled Copper Wire on an LPF, it was a tight fit but not too tight once the Enamelling was cleared off.
73, Colin M0XSD.
