I remember seeing something in the Operation manual about adjusting the CAT poll time for WSJT-X.
On page 60 of the latest manual version ....
Change the Poll Interval to 10 seconds, the default will be rather chatty with QMX which?
probably is not a problem, but anyway I feel more comfortable with the less frequent polling.
QMX has no capability to alter its operating frequency for example by itself, it can only do?
so at the command of WSJT-X over CAT; therefore the polling is actually redundant?
anyway.
I had to do that when testing with Fldigi, which I like to use for the ARRL frequency measuring tests. But of course, no transmitting going on there.?
If that doesn't do it, I'm out of ideas other than to check the CAT logging to see if the digi-ware is actually sending the TX start-stop-start pulse or the stop command before the time interval is up.?
Greg
On Mon, Jul 15, 2024 at 12:53 AM, Rob VK5ZIK
<rob.at.theshed@...> wrote:
Nothing has been changed at all..!!
I have just updated to the latest Firmware - with no change.
But plugging the KX3 in - there is no "pulse" at the start of transmissions.
Rob
VK5ZIK
