Re: SOLVED: QMX Receives but does not transmit
|
Hans:
I am torn between another QDX and a QMX.? Which would you recommend?
HIF
On May 14, 2024, at 06:50, "Hans Summers via groups.io" <hans.summers@...> wrote: Hello Jindra?
I'd need to take a look at that when I'm back from US but I'd tend towards calling it a bug not a feature....
73 Hans G0UPL
Hello, I tested how QMX behaves using a web application I am working on, which produces CW.
I set audio output from browser to QMX, set audio volume to 100% and set audio volume in my app also to at least 90%.
When QMX digital interface VOX is on, it transmits CW (must be in digi mode, CAT command MD6;). When I switch VOX off, turn to TX mide by CAT command "TX;", it sends only the first dash or dot and then goes automatically to RX mode.
Question to Hans: switching to RX as soon as input is interrupted is a feature or a bug? I assume that transceiver with VOX off should behave as if PTT was pressed as soon as TX; command is received and remain active until it receives RX; command. At least all my Kenwood transceivers behave that way and my KX3 does so as well.
73! Jindra
P.S. knowing this I think I should be able to program a similar thing to send and receive in a web browser RTTY :)
On Fri, Apr 5, 2024 at 08:34 PM, Nic Heath wrote:
Weirdly, MFSK works about half the time for me in fldigi with my QMX and RTTY it will sometimes transmit a few tones then stop.
|
Leland Lannoye, W9HIF