Be sure TxID is off and you're using firmware 017. Testing here only Thor, DominoEX, FSQ, FSKH105 & 245, IFKP, and MFSK work. The QMX does not like the other modes even though before firmware 007 they all worked except of course multi tone modes like PSK even with TxID on. I sure hope Hans can find time to figure it out.?
toggle quoted message
Show quoted text
On Mar 21, 2024, at 16:29, cube1us <
cube1@...> wrote:
I am having this same issue with RTTY on my low band QMX, firmware level 014. ?WSJT works fine with FT8.
- fldigi attenuator IS set to 0db (saw the pointer on YouTube about that)
- audio out is 100% (before that change, there was not tx at all)
- I doubt I have changed rise/fall times
- I doubt I have changed minimal samples from the default
- I am sure TXID is off.
I do see transmit bars on the QMX, but only for a seemingly random, typically very short (1s or so, but as much as 6s) transmissions. ?My macros DO set it back into <RX>, but I would have thought fldigi would not send that until it was done transmitting the text in the macro?
73 JRJ W9IYN
