Re: QRSS ARDUINO shield questions
|
Hi Colin
Yes, I see. Yes, you can provide a battery voltage > 7V, through the Vin pin, on my QRSS Arduino shield. The QRSS shield provides access to all the usual Arduino connectors on the two 6-pin and two 8-pin headers - which includes Gnd and the Vin pin.?
73 Hans G0UPL
On Tue, May 21, 2013 at 8:29 AM, dd5cf_colin <jobaco@...> wrote:
?
Hi Hans here is the link:
it is about 1/4 of the page down.
73 Colin
> --- In QRPLabs@..., Hans Summers wrote:
> >
> > Hi Colin
> >
> > > If I run the ARDUINO UNO on battery power can I connect it to GND and Vin
> > > (as recommend by the arduino website) through your QRSS shield?
> > >
> > All of the standard Arduino pins are fed through the shield in the standard
> > way. So if the website recommends that the Arduino can be powered by Gnd
> > and Vin through a shield, this would apply to the QRSS shield too. But to
> > be sure: can you provide a link to the part of the website that you are
> > referring to?
> >
> > 73 Hans
> >
>
|
