Do you have the power slider in WSJT-X set to maximum? It needs
to be at max for the QDX to work.
Roger
8P6RX
On 24/08/2023 06:33, Wayne Greene
wrote:
toggle quoted message
Show quoted text
I submitted a previous topic regarding the audio migration
settings. That may not be the problem. I finished my QDX build and
am now trying to get it to operate. It comes on just fine and I
updated the firmware to 1.10. Cat control is fine, as well. The
problem I am having seems to be with the audio. My QDX is not
hearing anything nor does it transmit. When I place the QDX, I get
just a single flash of the LED. I l found in the operations manual
this means my QDX is not receiving any audio. I did check the
WSJT-X settings and QDX is set as my input and output. It also
appears the audio configuration on my computer (win11) shows full
levels for the QDX input and output. I've changed USB cables, but
that didn't fix anything. So, what is my next troubleshooting
step?
Thanks,
Wayne KB4DSF
