开云体育Dan,Rig control as TS-480 or TS-440 should work with flidgi standalone, but not transmitting digital modes unless you are using firmware 006 or earlier. Later Hamlib versions also define the QDX and QMX. If you use flrig then the 2.0.02 version will have QMX and QDX rigs defined so it's simple to set up rig control. Flrig also gives you a slider to adjust the output volume into fldigi or any other software if the default settings are not what is needed at the moment. For me the QMX does not work with fldigi if I use firmware beyond 006. What I see is that fldigi will transmit/Tune once then never again until I power cycle the QMX then it will transmit once and not again etc, etc. Using firmware 006 ?all works normally except if you are using Olivia mode. Then either Tune in that mode once or use another mode once then Olivia will work normally as all the other FSK modes, the same as the QDX. Hans knows about it, but at this point no solution has come forth. So I recommend you go back to firmware 006 if you wish to do digital modes with fldigi. I find it odd, but it seems as the people on this forum don't use fldigi for digital modes, ?or at least they do not reply to my request for feedback. Maybe mine is an outlier, but I doubt it. 73, Cliff, AE5ZA
|
