开云体育

In the FT8CN application there is an option to connect via Bluetooth. You have to use that. Same for the QueBLE app that has to be connected from within the application itself. It doesn't connect in

Use MSHV it doesn't disconnect Used it for hours and never disconnected WSJTX and JTDx always disconnect on the q900 MSHV does not! ?Get BlueMail for Android ?

Squelch works only on FM at the moment 73 bITON

Did see on YouTube Techminds channel that the Mic Gain needs to be ajusted when on VHF & UHF 73 m0wao bITON

Does anybody use their Q900 on SSB? VHF or HF. Both have the same problem. Extreme over drive. AM is fine as is FM. They all share the same audio chain I would think. The only difference is the

Hi Bob. The radio provides a dry solid state active level low. What I do is put a micro relay on the back panel and an RCA plug like most radios. I never trust the solid state keying circuit. ?Real

Does anybodies SSB sound good on transmit? Does anybody have SSB squelch that works? Dave

I have a slightly different model, the TBR-119. Same software but different hardware. The short answer to your question is no, it doesn’t sound great. But SSB squelch does work. Sincerely, Brian

Great thank you Brian. My debut into modern radio’s. I do have a couple of questions. As you said probably a software issue. Does your sound good on SSB? Does your SSB squelch work? Dave

The compass menu option will spin until it gets a solid signal lock. I use a small router sma antenna to speed up signal lock. Then it will show Lat/Lon and altitude. My personal GPS module (early

Great! Thank you Dave

Dave it has been my experience that most issues are softer related. Each new release fixes 1-2 things, adds 1-2 things (they may or may not function), then they break two more. They are promising a

In what screen do you see that as I have been unable to find it. The Compas screen just gives random numbers and in the Menu I can't find a GPS screen / window

Good to see activity even if I don’t know what your talking about. I’m a retired RF tech and my primary interest is the radio. I’m on # 3 now and about to send it back. They all seem to have a

I have the same issue. I'd like to know how to find the correct PIN. But when I connected with the QRadioBLE app it doesn't make me do any of that - no PIN required. I'd like to use WoAD directly with

On a droid you will see two BT connected for the radio. It should the the audio connection icon. Regardless, I just enabled everything regarding BT to allow and it worked. Sincerely, Brian

The q900 radio has Bluetooth built in. My Android tablet sees this Bluetooth. But when I try to connect to it from my tablet it asks for the PIN. It suggests 0000 or 1234 but neither of these work.

I always put a micro relay on the back panel to isolate the solid state switching. Saved a lot of radios! Dave

Let me know if this reaches you. I’m old and retired out of the communications field. I hired people to do the IT stuff so am now playing catch up. My computer skills are poor. I had to hire someone

I’m old and not much on the computer. I’ve had three of these and all are broken. The last one I have down to an ALC issue for SSB. Can anybody help me? I updated the Firm ware and the rest of it