Reverification process for some listers
Hi all, Looks like IO (host for the PacNW928 group) is double checking some accounts to ensure they aren't listed as a "spam server".? Not sure how many folks here got the email, but it's nothing nefarious and if you want to stay on the list, you'll need to finish the re-verification process. Hopefully it's not too difficult :) . Tom Here's the email they sent me just as a FYI:
You are receiving this email because you are an owner or moderator of one or more Groups.io groups. We are in the process of reverifying some of our users and we wanted to make sure you knew what was happening and why. For more detail about this, please visit the Reverification FAQ, at /static/reverifyfaq
On Saturday January 13th, 2024, an anti-spam service called Spamhaus labeled one of our email servers as a spam sender. This caused any email service that uses Spamhaus to stop accepting email from our server. Because of this, we began a reverification process and sent out reverification emails to a subset of our users on Sunday January 14th. Spamhaus lifted their block on Monday, January 15th, 2024, but we need to continue the reverification process.
You can see which, if any, of your users are affected. Go to the Admin section of your group and look at the Members page. Next to each user's email, there may be a badge with the letters RI or RS. RI means the confirmation/reverification is in progress, but has not been completed. RS means the confirmation/reverification has been successfully completed.
Here are the next steps in the reverification process:
- On Sunday, January 28th, group emails to people in the RI state will be disabled. Messages from moderators and login link emails will still work.
- Until February 11th, people will still be able to reverify themselves and the RI and RS badges will still show up in the Members page.
- After that, members still in the RI state will be removed from groups. The activity log entry will be Membership - Member Removed, with the added reason of reverification failed.
?
For domains where no reverifications happened, no invites or direct adds will be permitted going forward. If there is a valid person on one of those domains, they should contact [email protected] to have the domain ban lifted.
We apologize for the inconvenience this process may cause, but it is necessary to ensure that we are able to continue delivering group email reliably. Thank you for using Groups.io.
Best Regards, The Groups.io Team
|
Re: 5 speed transaxle in Portland
I let peter know ill hold onto it for him.. Going to tuck it under the stairs..
Thank you all?
|
Re: 5 speed transaxle in Portland
I think I can help, so long as it can get into the back of a Subaru. It can live in my garage until you're available to pick it up.
I don't know if you want to discuss details here, but reach out separately if that's preferred.
Cheers,
Glenn
|
5 speed transaxle in Portland
Jonathan Ott in Portland just posted an early one for sale. ?
He wants it gone now. ?I am at my winter home in Africa until June.
Could anyone here pick it up and hold it until I return stateside?
I can get the money to him
Cheers
|
after a legendary 8 hour thrash, and a multitude of frustrating scenarios today, the car is ready to go for tomorrow. I didn't get all the detail work I wanted to get done, but I didn't expect all the extra labor that came my way the past three days.
see you guys tomorrow!
On Thu, Jan 18, 2024 at 1:24?PM jeff evans via <bluehare0188= [email protected]> wrote: Stopped in my tracks again by parts guy ordering wrong timing belt. Another one overnighted.? Tomorrow is the last chance to get it done, and the front calipers rebuilt.? Jeff Evans
Name of your new restaurant ? :D
On 1/17/2024 9:35 PM, Jeff Mohler via
wrote:
So few people have ever displayed genuine
curiosity for that.? In like 20yrs. ?
---
Gustatus Similis Pullus
On Thu, Jan 18, 2024 at
12:25 {928}Nick Daffern via <Daffern1= [email protected]>
wrote:
Tastes
like chicken? LOL¡
![]()
Small
file. ??
---
Gustatus Similis Pullus
I got a new woodruff key (5
x 6.5) at the ktm dealer since porsche was
out of stock. Timing belt should be in
around 11am. Still need the oil pump shaft
to accept the key and replacement gear.
It's close but not quite dropping in yet.?
Jeff Evans
yep M10 being 17mm "nut" :D
On 1/17/2024 5:14 PM, cjensan928s
via??wrote:
The 3 bolts holding
the pump to the block are M8x1.25
and are 15 ft lbs
All gear nuts are
M10x1.5 and are 29 ft lbs?
Cheers
Colin J
604-807-4523?
-------- Original message
--------
Date: 2024-01-17 5:10?p.m.
(GMT-08:00)?
Subject: Re: [PacNW928]
Avant's Colours?
I think it's 13mm bolt 15, 17mm
bolt 29???
Can't remember which one is on
the old 4.5 engines..
On 1/17/2024 4:56 PM,
cjensan928s via??wrote:
Tom,
The oil pump gear
nut is higher than 15 ft lbs....
The oil pump gear
nut should be 29 ft lbs with a
small dab of blue loctite.?
-------- Original message
--------
Date: 2024-01-17 4:30?p.m.
(GMT-08:00)?
Subject: Re: [PacNW928]
Avant's Colours?
Sounds like good news...
torque to 15 ft-lbs and use a
little loctite.??
Also recommended to replace
with a steel pump gear (if it's
aluminum) due to fractures.?
Double check to? make sure...
good luck and hope it all goes
back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff
evans via??wrote:
Oil pump gear
came off.? Parts are on
overnight status, hopefully
back together tomorrow
On Wed,
Jan 17, 2024, 1:12?PM jeff
evans via ??<bluehare0188= [email protected]> wrote:
If anyone
was looking forward to
this more than I was, I
probably won't make it.
New Timing belt broke on
the first drive today and
I'm pretty stressed?out.?
Not sure
I'll be able to get it
back together in time
for the event.? This car
makes me so sad.?
Just?wanted
to let you know. I'm
going to thrash on it if
I can get it back in my
garage tonight. I should
be able to at least
figure out what
happened.?
Jeff Evans
On
Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...> wrote:
Hi
Jeff. If that
question is directed
to me, the answer is
No. Mine is metallic
gray. Andy
Get?
Isn't
that the white one
that I've seen
around with the
gold wheels??
Jeff Evans
I¡¯m
signed up in
my 928 as
well. It¡¯s a
really cool
club that puts
on all kinds
of cool events
all year
long.?
Looking
forward to
seeing some of
you there.?
Jason
?
FYI.
The attendee
sign up is
full and sold
out.
Maybe
they have a
wait list?
Andy
Vancouver,
Washington?
'88
S4
Get?
Here's a
link to the
event that
Jeff E is
getting his
928 ready
for.??
Saturday
January 20,
2024 5 to 8pm
Lamborghini of
Seattle
(Bellevue)
Sounds similar
to radwood
events that
have happened
in the
past....?
|
Stopped in my tracks again by parts guy ordering wrong timing belt. Another one overnighted.? Tomorrow is the last chance to get it done, and the front calipers rebuilt.? Jeff Evans
Name of your new restaurant ? :D
On 1/17/2024 9:35 PM, Jeff Mohler via
wrote:
So few people have ever displayed genuine
curiosity for that.? In like 20yrs. ?
---
Gustatus Similis Pullus
On Thu, Jan 18, 2024 at
12:25 {928}Nick Daffern via <Daffern1= [email protected]>
wrote:
Tastes
like chicken? LOL¡
Small
file. ??
---
Gustatus Similis Pullus
I got a new woodruff key (5
x 6.5) at the ktm dealer since porsche was
out of stock. Timing belt should be in
around 11am. Still need the oil pump shaft
to accept the key and replacement gear.
It's close but not quite dropping in yet.?
Jeff Evans
yep M10 being 17mm "nut" :D
On 1/17/2024 5:14 PM, cjensan928s
via??wrote:
The 3 bolts holding
the pump to the block are M8x1.25
and are 15 ft lbs
All gear nuts are
M10x1.5 and are 29 ft lbs?
Cheers
Colin J
604-807-4523?
-------- Original message
--------
Date: 2024-01-17 5:10?p.m.
(GMT-08:00)?
Subject: Re: [PacNW928]
Avant's Colours?
I think it's 13mm bolt 15, 17mm
bolt 29???
Can't remember which one is on
the old 4.5 engines..
On 1/17/2024 4:56 PM,
cjensan928s via??wrote:
Tom,
The oil pump gear
nut is higher than 15 ft lbs....
The oil pump gear
nut should be 29 ft lbs with a
small dab of blue loctite.?
-------- Original message
--------
Date: 2024-01-17 4:30?p.m.
(GMT-08:00)?
Subject: Re: [PacNW928]
Avant's Colours?
Sounds like good news...
torque to 15 ft-lbs and use a
little loctite.??
Also recommended to replace
with a steel pump gear (if it's
aluminum) due to fractures.?
Double check to? make sure...
good luck and hope it all goes
back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff
evans via??wrote:
Oil pump gear
came off.? Parts are on
overnight status, hopefully
back together tomorrow
On Wed,
Jan 17, 2024, 1:12?PM jeff
evans via ??<bluehare0188= [email protected]> wrote:
If anyone
was looking forward to
this more than I was, I
probably won't make it.
New Timing belt broke on
the first drive today and
I'm pretty stressed?out.?
Not sure
I'll be able to get it
back together in time
for the event.? This car
makes me so sad.?
Just?wanted
to let you know. I'm
going to thrash on it if
I can get it back in my
garage tonight. I should
be able to at least
figure out what
happened.?
Jeff Evans
On
Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...> wrote:
Hi
Jeff. If that
question is directed
to me, the answer is
No. Mine is metallic
gray. Andy
Get?
Isn't
that the white one
that I've seen
around with the
gold wheels??
Jeff Evans
I¡¯m
signed up in
my 928 as
well. It¡¯s a
really cool
club that puts
on all kinds
of cool events
all year
long.?
Looking
forward to
seeing some of
you there.?
Jason
?
FYI.
The attendee
sign up is
full and sold
out.
Maybe
they have a
wait list?
Andy
Vancouver,
Washington?
'88
S4
Get?
Here's a
link to the
event that
Jeff E is
getting his
928 ready
for.??
Saturday
January 20,
2024 5 to 8pm
Lamborghini of
Seattle
(Bellevue)
Sounds similar
to radwood
events that
have happened
in the
past....?
|
Name of your new restaurant ? :D
On 1/17/2024 9:35 PM, Jeff Mohler via
groups.io wrote:
toggle quoted message
Show quoted text
So few people have ever displayed genuine
curiosity for that.? In like 20yrs. ?
---
Gustatus Similis Pullus
On Thu, Jan 18, 2024 at
12:25 {928}Nick Daffern via <Daffern1= [email protected]>
wrote:
Tastes
like chicken? LOL¡
Small
file. ??
---
Gustatus Similis Pullus
I got a new woodruff key (5
x 6.5) at the ktm dealer since porsche was
out of stock. Timing belt should be in
around 11am. Still need the oil pump shaft
to accept the key and replacement gear.
It's close but not quite dropping in yet.?
Jeff Evans
yep M10 being 17mm "nut" :D
On 1/17/2024 5:14 PM, cjensan928s
via??wrote:
The 3 bolts holding
the pump to the block are M8x1.25
and are 15 ft lbs
All gear nuts are
M10x1.5 and are 29 ft lbs?
Cheers
Colin J
604-807-4523?
-------- Original message
--------
Date: 2024-01-17 5:10?p.m.
(GMT-08:00)?
Subject: Re: [PacNW928]
Avant's Colours?
I think it's 13mm bolt 15, 17mm
bolt 29???
Can't remember which one is on
the old 4.5 engines..
On 1/17/2024 4:56 PM,
cjensan928s via??wrote:
Tom,
The oil pump gear
nut is higher than 15 ft lbs....
The oil pump gear
nut should be 29 ft lbs with a
small dab of blue loctite.?
-------- Original message
--------
Date: 2024-01-17 4:30?p.m.
(GMT-08:00)?
Subject: Re: [PacNW928]
Avant's Colours?
Sounds like good news...
torque to 15 ft-lbs and use a
little loctite.??
Also recommended to replace
with a steel pump gear (if it's
aluminum) due to fractures.?
Double check to? make sure...
good luck and hope it all goes
back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff
evans via??wrote:
Oil pump gear
came off.? Parts are on
overnight status, hopefully
back together tomorrow
On Wed,
Jan 17, 2024, 1:12?PM jeff
evans via ??<bluehare0188= [email protected]> wrote:
If anyone
was looking forward to
this more than I was, I
probably won't make it.
New Timing belt broke on
the first drive today and
I'm pretty stressed?out.?
Not sure
I'll be able to get it
back together in time
for the event.? This car
makes me so sad.?
Just?wanted
to let you know. I'm
going to thrash on it if
I can get it back in my
garage tonight. I should
be able to at least
figure out what
happened.?
Jeff Evans
On
Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...> wrote:
Hi
Jeff. If that
question is directed
to me, the answer is
No. Mine is metallic
gray. Andy
Get?
Isn't
that the white one
that I've seen
around with the
gold wheels??
Jeff Evans
I¡¯m
signed up in
my 928 as
well. It¡¯s a
really cool
club that puts
on all kinds
of cool events
all year
long.?
Looking
forward to
seeing some of
you there.?
Jason
?
FYI.
The attendee
sign up is
full and sold
out.
Maybe
they have a
wait list?
Andy
Vancouver,
Washington?
'88
S4
Get?
Here's a
link to the
event that
Jeff E is
getting his
928 ready
for.??
Saturday
January 20,
2024 5 to 8pm
Lamborghini of
Seattle
(Bellevue)
Sounds similar
to radwood
events that
have happened
in the
past....?
|
So few people have ever displayed genuine curiosity for that.? In like 20yrs. ? ---
Gustatus Similis Pullus
On Thu, Jan 18, 2024 at 12:25 {928}Nick Daffern via <Daffern1= [email protected]> wrote: Tastes like chicken? LOL¡
Small file. ?? ---
Gustatus Similis Pullus
I got a new woodruff key (5 x 6.5) at the ktm dealer since porsche was out of stock. Timing belt should be in around 11am. Still need the oil pump shaft to accept the key and replacement gear. It's close but not quite dropping in yet.?
Jeff Evans
yep M10 being 17mm "nut" :D
On 1/17/2024 5:14 PM, cjensan928s via??wrote:
The 3 bolts holding the pump to the block are M8x1.25 and are 15 ft lbs All gear nuts are M10x1.5 and are 29 ft lbs?
Cheers Colin J 604-807-4523?
-------- Original message -------- Date: 2024-01-17 5:10?p.m. (GMT-08:00)? Subject: Re: [PacNW928] Avant's Colours?
I think it's 13mm bolt 15, 17mm bolt 29???
Can't remember which one is on the old 4.5 engines..
On 1/17/2024 4:56 PM, cjensan928s via??wrote:
Tom,
The oil pump gear nut is higher than 15 ft lbs....
The oil pump gear nut should be 29 ft lbs with a small dab of blue loctite.?
-------- Original message -------- Date: 2024-01-17 4:30?p.m. (GMT-08:00)? Subject: Re: [PacNW928] Avant's Colours?
Sounds like good news... torque to 15 ft-lbs and use a little loctite.??
Also recommended to replace with a steel pump gear (if it's aluminum) due to fractures.? Double check to? make sure... good luck and hope it all goes back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff evans via??wrote:
Oil pump gear came off.? Parts are on overnight status, hopefully back together tomorrow
On Wed, Jan 17, 2024, 1:12?PM jeff evans via ??<bluehare0188= [email protected]> wrote: If anyone was looking forward to this more than I was, I probably won't make it. New Timing belt broke on the first drive today and I'm pretty stressed?out.? Not sure I'll be able to get it back together in time for the event.? This car makes me so sad.? Just?wanted to let you know. I'm going to thrash on it if I can get it back in my garage tonight. I should be able to at least figure out what happened.?
Jeff Evans
On Thu, Jan 11, 2024, 10:51?AM Andre S < ads78911@...> wrote: Hi Jeff. If that question is directed to me, the answer is No. Mine is metallic gray. Andy
Get?
Isn't that the white one that I've seen around with the gold wheels??
Jeff Evans I¡¯m signed up in my 928 as well. It¡¯s a really cool club that puts on all kinds of cool events all year long.? Looking forward to seeing some of you there.?
Jason ? FYI. The attendee sign up is full and sold out.
Maybe they have a wait list?
Andy Vancouver, Washington? '88 S4
Get?
Here's a link to the event that Jeff E is getting his 928 ready for.??
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that have happened in the past....?
|
Tastes like chicken? LOL¡
toggle quoted message
Show quoted text
Small file. ?? ---
Gustatus Similis Pullus
I got a new woodruff key (5 x 6.5) at the ktm dealer since porsche was out of stock. Timing belt should be in around 11am. Still need the oil pump shaft to accept the key and replacement gear. It's close but not quite dropping in yet.?
Jeff Evans
yep M10 being 17mm "nut" :D
On 1/17/2024 5:14 PM, cjensan928s via??wrote:
The 3 bolts holding the pump to the block are M8x1.25 and are 15 ft lbs All gear nuts are M10x1.5 and are 29 ft lbs?
Cheers Colin J 604-807-4523?
-------- Original message -------- Date: 2024-01-17 5:10?p.m. (GMT-08:00)? Subject: Re: [PacNW928] Avant's Colours?
I think it's 13mm bolt 15, 17mm bolt 29???
Can't remember which one is on the old 4.5 engines..
On 1/17/2024 4:56 PM, cjensan928s via??wrote:
Tom,
The oil pump gear nut is higher than 15 ft lbs....
The oil pump gear nut should be 29 ft lbs with a small dab of blue loctite.?
-------- Original message -------- Date: 2024-01-17 4:30?p.m. (GMT-08:00)? Subject: Re: [PacNW928] Avant's Colours?
Sounds like good news... torque to 15 ft-lbs and use a little loctite.??
Also recommended to replace with a steel pump gear (if it's aluminum) due to fractures.? Double check to? make sure... good luck and hope it all goes back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff evans via??wrote:
Oil pump gear came off.? Parts are on overnight status, hopefully back together tomorrow
On Wed, Jan 17, 2024, 1:12?PM jeff evans via ??<bluehare0188= [email protected]> wrote: If anyone was looking forward to this more than I was, I probably won't make it. New Timing belt broke on the first drive today and I'm pretty stressed?out.? Not sure I'll be able to get it back together in time for the event.? This car makes me so sad.? Just?wanted to let you know. I'm going to thrash on it if I can get it back in my garage tonight. I should be able to at least figure out what happened.?
Jeff Evans
On Thu, Jan 11, 2024, 10:51?AM Andre S < ads78911@...> wrote: Hi Jeff. If that question is directed to me, the answer is No. Mine is metallic gray. Andy
Get?
Isn't that the white one that I've seen around with the gold wheels??
Jeff Evans I¡¯m signed up in my 928 as well. It¡¯s a really cool club that puts on all kinds of cool events all year long.? Looking forward to seeing some of you there.?
Jason ? FYI. The attendee sign up is full and sold out.
Maybe they have a wait list?
Andy Vancouver, Washington? '88 S4
Get?
Here's a link to the event that Jeff E is getting his 928 ready for.??
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that have happened in the past....?
|
Small file. ?? ---
Gustatus Similis Pullus
I got a new woodruff key (5 x 6.5) at the ktm dealer since porsche was out of stock. Timing belt should be in around 11am. Still need the oil pump shaft to accept the key and replacement gear. It's close but not quite dropping in yet.?
Jeff Evans
yep M10 being 17mm "nut" :D
On 1/17/2024 5:14 PM, cjensan928s via
wrote:
The 3 bolts holding the pump to the block are
M8x1.25 and are 15 ft lbs
All gear nuts are M10x1.5 and are 29 ft lbs?
Cheers
Colin J
604-807-4523?
-------- Original message --------
Date: 2024-01-17 5:10?p.m. (GMT-08:00)
Subject: Re: [PacNW928] Avant's Colours
I think it's 13mm bolt 15, 17mm bolt 29??
Can't remember which one is on the old 4.5 engines..
On 1/17/2024 4:56 PM, cjensan928s via
wrote:
Tom,
The oil pump gear nut is higher than 15 ft
lbs....
The oil pump gear nut should be 29 ft lbs with a
small dab of blue loctite.?
-------- Original message --------
Date: 2024-01-17 4:30?p.m. (GMT-08:00)
Subject: Re: [PacNW928] Avant's Colours
Sounds like good news...
torque to 15 ft-lbs and use a little loctite.?
Also recommended to replace with a steel pump gear (if it's
aluminum) due to fractures.? Double check to? make sure...
good luck and hope it all goes back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff evans
via wrote:
Oil pump gear came off.? Parts are on
overnight status, hopefully back together tomorrow
If anyone was looking forward to this more
than I was, I probably won't make it. New Timing belt
broke on the first drive today and I'm pretty
stressed?out.?
Not sure I'll be able to get it back
together in time for the event.? This car makes me so
sad.?
Just?wanted to let you know. I'm going
to thrash on it if I can get it back in my garage
tonight. I should be able to at least figure out what
happened.?
Jeff Evans
On Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...>
wrote:
Hi Jeff. If that question is
directed to me, the answer is No. Mine is metallic
gray. Andy
Get
Isn't that the white one that I've
seen around with the gold wheels??
Jeff Evans
I¡¯m signed up in my 928 as
well. It¡¯s a really cool club that puts on
all kinds of cool events all year long.?
Looking forward to seeing
some of you there.?
Jason
?
FYI. The attendee sign
up is full and sold out.
Maybe they have a wait
list?
Andy
Vancouver, Washington?
'88 S4
Get
Here's a link to the event that
Jeff E is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that
have happened in the past....
|
I got a new woodruff key (5 x 6.5) at the ktm dealer since porsche was out of stock. Timing belt should be in around 11am. Still need the oil pump shaft to accept the key and replacement gear. It's close but not quite dropping in yet.?
Jeff Evans
yep M10 being 17mm "nut" :D
On 1/17/2024 5:14 PM, cjensan928s via
wrote:
The 3 bolts holding the pump to the block are
M8x1.25 and are 15 ft lbs
All gear nuts are M10x1.5 and are 29 ft lbs?
Cheers
Colin J
604-807-4523?
-------- Original message --------
Date: 2024-01-17 5:10?p.m. (GMT-08:00)
Subject: Re: [PacNW928] Avant's Colours
I think it's 13mm bolt 15, 17mm bolt 29??
Can't remember which one is on the old 4.5 engines..
On 1/17/2024 4:56 PM, cjensan928s via
wrote:
Tom,
The oil pump gear nut is higher than 15 ft
lbs....
The oil pump gear nut should be 29 ft lbs with a
small dab of blue loctite.?
-------- Original message --------
Date: 2024-01-17 4:30?p.m. (GMT-08:00)
Subject: Re: [PacNW928] Avant's Colours
Sounds like good news...
torque to 15 ft-lbs and use a little loctite.?
Also recommended to replace with a steel pump gear (if it's
aluminum) due to fractures.? Double check to? make sure...
good luck and hope it all goes back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff evans
via wrote:
Oil pump gear came off.? Parts are on
overnight status, hopefully back together tomorrow
If anyone was looking forward to this more
than I was, I probably won't make it. New Timing belt
broke on the first drive today and I'm pretty
stressed?out.?
Not sure I'll be able to get it back
together in time for the event.? This car makes me so
sad.?
Just?wanted to let you know. I'm going
to thrash on it if I can get it back in my garage
tonight. I should be able to at least figure out what
happened.?
Jeff Evans
On Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...>
wrote:
Hi Jeff. If that question is
directed to me, the answer is No. Mine is metallic
gray. Andy
Get
Isn't that the white one that I've
seen around with the gold wheels??
Jeff Evans
I¡¯m signed up in my 928 as
well. It¡¯s a really cool club that puts on
all kinds of cool events all year long.?
Looking forward to seeing
some of you there.?
Jason
?
FYI. The attendee sign
up is full and sold out.
Maybe they have a wait
list?
Andy
Vancouver, Washington?
'88 S4
Get
Here's a link to the event that
Jeff E is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that
have happened in the past....
|
yep M10 being 17mm "nut" :D
On 1/17/2024 5:14 PM, cjensan928s via
groups.io wrote:
toggle quoted message
Show quoted text
The 3 bolts holding the pump to the block are
M8x1.25 and are 15 ft lbs
All gear nuts are M10x1.5 and are 29 ft lbs?
Cheers
Colin J
604-807-4523?
-------- Original message --------
Date: 2024-01-17 5:10?p.m. (GMT-08:00)
Subject: Re: [PacNW928] Avant's Colours
I think it's 13mm bolt 15, 17mm bolt 29??
Can't remember which one is on the old 4.5 engines..
On 1/17/2024 4:56 PM, cjensan928s via
groups.io wrote:
Tom,
The oil pump gear nut is higher than 15 ft
lbs....
The oil pump gear nut should be 29 ft lbs with a
small dab of blue loctite.?
-------- Original message --------
Date: 2024-01-17 4:30?p.m. (GMT-08:00)
Subject: Re: [PacNW928] Avant's Colours
Sounds like good news...
torque to 15 ft-lbs and use a little loctite.?
Also recommended to replace with a steel pump gear (if it's
aluminum) due to fractures.? Double check to? make sure...
good luck and hope it all goes back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff evans
via groups.io wrote:
Oil pump gear came off.? Parts are on
overnight status, hopefully back together tomorrow
If anyone was looking forward to this more
than I was, I probably won't make it. New Timing belt
broke on the first drive today and I'm pretty
stressed?out.?
Not sure I'll be able to get it back
together in time for the event.? This car makes me so
sad.?
Just?wanted to let you know. I'm going
to thrash on it if I can get it back in my garage
tonight. I should be able to at least figure out what
happened.?
Jeff Evans
On Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...>
wrote:
Hi Jeff. If that question is
directed to me, the answer is No. Mine is metallic
gray. Andy
Get
Isn't that the white one that I've
seen around with the gold wheels??
Jeff Evans
I¡¯m signed up in my 928 as
well. It¡¯s a really cool club that puts on
all kinds of cool events all year long.?
Looking forward to seeing
some of you there.?
Jason
?
FYI. The attendee sign
up is full and sold out.
Maybe they have a wait
list?
Andy
Vancouver, Washington?
'88 S4
Get
Here's a link to the event that
Jeff E is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that
have happened in the past....
|
The 3 bolts holding the pump to the block are M8x1.25 and are 15 ft lbs All gear nuts are M10x1.5 and are 29 ft lbs?
Cheers Colin J 604-807-4523?
toggle quoted message
Show quoted text
-------- Original message -------- From: "amidlman via groups.io" <midlman@...> Date: 2024-01-17 5:10?p.m. (GMT-08:00) Subject: Re: [PacNW928] Avant's Colours
I think it's 13mm bolt 15, 17mm bolt 29??
Can't remember which one is on the old 4.5 engines..
On 1/17/2024 4:56 PM, cjensan928s via
groups.io wrote:
Tom,
The oil pump gear nut is higher than 15 ft lbs....
The oil pump gear nut should be 29 ft lbs with a
small dab of blue loctite.?
-------- Original message --------
Date: 2024-01-17 4:30?p.m. (GMT-08:00)
Subject: Re: [PacNW928] Avant's Colours
Sounds like good news...
torque to 15 ft-lbs and use a little loctite.?
Also recommended to replace with a steel pump gear (if it's
aluminum) due to fractures.? Double check to? make sure...
good luck and hope it all goes back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff evans via
groups.io wrote:
Oil pump gear came off.? Parts are on overnight
status, hopefully back together tomorrow
If anyone was looking forward to this more
than I was, I probably won't make it. New Timing belt
broke on the first drive today and I'm pretty
stressed?out.?
Not sure I'll be able to get it back
together in time for the event.? This car makes me so
sad.?
Just?wanted to let you know. I'm going to
thrash on it if I can get it back in my garage tonight.
I should be able to at least figure out what happened.?
Jeff Evans
On Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...>
wrote:
Hi Jeff. If that question is directed
to me, the answer is No. Mine is metallic gray. Andy
Get
Isn't that the white one that I've
seen around with the gold wheels??
Jeff Evans
I¡¯m signed up in my 928 as well.
It¡¯s a really cool club that puts on all kinds
of cool events all year long.?
Looking forward to seeing some
of you there.?
Jason
?
FYI. The attendee sign up
is full and sold out.
Maybe they have a wait
list?
Andy
Vancouver, Washington?
'88 S4
Get
Here's a link to the event that Jeff
E is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that
have happened in the past....
|
I think it's 13mm nut 15, 17mm nut 29??
Can't remember which one is on the old 4.5 engines..
?
On 1/17/2024 4:56 PM, cjensan928s via groups.io wrote:
Tom,
?
The oil pump gear nut is higher than 15 ft lbs....
?
The oil pump gear nut should be 29 ft lbs with a small dab of blue loctite.?
?
?
?
-------- Original message --------
Date: 2024-01-17 4:30?p.m. (GMT-08:00)
Subject: Re: [PacNW928] Avant's Colours
?
Sounds like good news...
torque to 15 ft-lbs and use a little loctite.?
Also recommended to replace with a steel pump gear (if it's aluminum) due to fractures.? Double check to? make sure...
good luck and hope it all goes back together quickly.
?
Tom
On 1/17/2024 4:01 PM, jeff evans via groups.io wrote:
Oil pump gear came off.? Parts are on overnight status, hopefully back together tomorrow
If anyone was looking forward to this more than I was, I probably won't make it. New Timing belt broke on the first drive today and I'm pretty stressed?out.?
Not sure I'll be able to get it back together in time for the event.? This car makes me so sad.?
Just?wanted to let you know. I'm going to thrash on it if I can get it back in my garage tonight. I should be able to at least figure out what happened.?
?
Jeff Evans
On Thu, Jan 11, 2024, 10:51?AM Andre S < ads78911@...> wrote:
Hi Jeff. If that question is directed to me, the answer is No. Mine is metallic gray. Andy
?
Get
Isn't that the white one that I've seen around with the gold wheels??
?
Jeff Evans
I¡¯m signed up in my 928 as well. It¡¯s a really cool club that puts on all kinds of cool events all year long.?
Looking forward to seeing some of you there.?
?
Jason
FYI. The attendee sign up is full and sold out.
?
Maybe they have a wait list?
?
Andy
Vancouver, Washington?
'88 S4
?
Get
Here's a link to the event that Jeff E is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that have happened in the past....
|
Tom,
The oil pump gear nut is higher than 15 ft lbs....
The oil pump gear nut should be 29 ft lbs with a small dab of blue loctite.?
toggle quoted message
Show quoted text
-------- Original message -------- From: "amidlman via groups.io" <midlman@...> Date: 2024-01-17 4:30?p.m. (GMT-08:00) Subject: Re: [PacNW928] Avant's Colours
Sounds like good news...
torque to 15 ft-lbs and use a little loctite.?
Also recommended to replace with a steel pump gear (if it's
aluminum) due to fractures.? Double check to? make sure...
good luck and hope it all goes back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff evans via
groups.io wrote:
Oil pump gear came off.? Parts are on overnight
status, hopefully back together tomorrow
If anyone was looking forward to this more
than I was, I probably won't make it. New Timing belt broke
on the first drive today and I'm pretty stressed?out.?
Not sure I'll be able to get it back
together in time for the event.? This car makes me so
sad.?
Just?wanted to let you know. I'm going to
thrash on it if I can get it back in my garage tonight. I
should be able to at least figure out what happened.?
Jeff Evans
On Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...>
wrote:
Hi Jeff. If that question is directed to
me, the answer is No. Mine is metallic gray. Andy
Get
Isn't that the white one that I've seen
around with the gold wheels??
Jeff Evans
I¡¯m signed up in my 928 as well.
It¡¯s a really cool club that puts on all kinds
of cool events all year long.?
Looking forward to seeing some of
you there.?
Jason
?
FYI. The attendee sign up is
full and sold out.
Maybe they have a wait list?
Andy
Vancouver, Washington?
'88 S4
Get
Here's a link to the event that Jeff E
is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that have
happened in the past....
|
Sounds like good news...
torque to 15 ft-lbs and use a little loctite.?
Also recommended to replace with a steel pump gear (if it's
aluminum) due to fractures.? Double check to? make sure...
good luck and hope it all goes back together quickly.
Tom
On 1/17/2024 4:01 PM, jeff evans via
groups.io wrote:
toggle quoted message
Show quoted text
Oil pump gear came off.? Parts are on overnight
status, hopefully back together tomorrow
If anyone was looking forward to this more
than I was, I probably won't make it. New Timing belt broke
on the first drive today and I'm pretty stressed?out.?
Not sure I'll be able to get it back
together in time for the event.? This car makes me so
sad.?
Just?wanted to let you know. I'm going to
thrash on it if I can get it back in my garage tonight. I
should be able to at least figure out what happened.?
Jeff Evans
On Thu, Jan 11, 2024,
10:51?AM Andre S < ads78911@...>
wrote:
Hi Jeff. If that question is directed to
me, the answer is No. Mine is metallic gray. Andy
Get
Isn't that the white one that I've seen
around with the gold wheels??
Jeff Evans
I¡¯m signed up in my 928 as well.
It¡¯s a really cool club that puts on all kinds
of cool events all year long.?
Looking forward to seeing some of
you there.?
Jason
?
FYI. The attendee sign up is
full and sold out.
Maybe they have a wait list?
Andy
Vancouver, Washington?
'88 S4
Get
Here's a link to the event that Jeff E
is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that have
happened in the past....
|
Jeff I hope this gets you going.
Good luck.
|
Oil pump gear came off.? Parts are on overnight status, hopefully back together tomorrow
If anyone was looking forward to this more than I was, I probably won't make it. New Timing belt broke on the first drive today and I'm pretty stressed?out.? Not sure I'll be able to get it back together in time for the event.? This car makes me so sad.? Just?wanted to let you know. I'm going to thrash on it if I can get it back in my garage tonight. I should be able to at least figure out what happened.?
Jeff Evans
On Thu, Jan 11, 2024, 10:51?AM Andre S < ads78911@...> wrote:
Hi Jeff. If that question is directed to me, the answer is No. Mine is metallic gray. Andy
Get
Isn't that the white one that I've seen around with the gold wheels??
Jeff Evans
I¡¯m signed up in my 928 as well. It¡¯s a really cool club that puts on all kinds of cool events all year long.?
Looking forward to seeing some of you there.?
Jason
?
FYI. The attendee sign up is full and sold out.
Maybe they have a wait list?
Andy
Vancouver, Washington?
'88 S4
Get
Here's a link to the event that Jeff E is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that have happened in the past....
|
If anyone was looking forward to this more than I was, I probably won't make it. New Timing belt broke on the first drive today and I'm pretty stressed?out.? Not sure I'll be able to get it back together in time for the event.? This car makes me so sad.? Just?wanted to let you know. I'm going to thrash on it if I can get it back in my garage tonight. I should be able to at least figure out what happened.?
Jeff Evans
On Thu, Jan 11, 2024, 10:51?AM Andre S < ads78911@...> wrote:
Hi Jeff. If that question is directed to me, the answer is No. Mine is metallic gray. Andy
Get
Isn't that the white one that I've seen around with the gold wheels??
Jeff Evans
I¡¯m signed up in my 928 as well. It¡¯s a really cool club that puts on all kinds of cool events all year long.?
Looking forward to seeing some of you there.?
Jason
?
FYI. The attendee sign up is full and sold out.
Maybe they have a wait list?
Andy
Vancouver, Washington?
'88 S4
Get
Here's a link to the event that Jeff E is getting his 928 ready for.?
Saturday January 20, 2024 5 to 8pm
Lamborghini of Seattle (Bellevue)
Sounds similar to radwood events that have happened in the past....
|
Jeff,
Thanks for the lead. Looks like both are worth looking into.
David
|
Jott
Peter S s/v Dawa II
