开云体育

Andre...I watched a K0PIR you tube video on setting up the virtual com port. I might give it a whirl, but I have the TRS to USB cable, and it is plug 'n play, so that is what I set up for the tail end

Yes, understood. My original question related to the difference between the 7300 and the 7610. The 7610 allows CW keying and rig control on two com ports but over ONE usb cable. The 7300 you need the

Hi Randy, Thanks for your e-mail.? Dave's second approach is the one that I would recommend (thanks loads Dave).? I just can't stress enough to make a separate backup of your original data before

Correction: some type LoTW issue I would guess

Scott, The folder "A permission was it.? It was set to "Read Only".? I turned that off brought up ACLog made the changes.? Closed ACLog.? Changes stayed.? Rebooted, went into ACLog, made a

I thought I was getting my Miranda rights read to me at the end!

As you are manipulating your files, be super careful to preserve your original files someplace safe. N3FJP automatically saves the current version upon exit, so it is very easy to lose the original

Dan, Make sure that this box is checked: Tom K5TEE

Having done the FD submittal for our club for the past 5 years, I have had to deal with similar issues. I feel your pain! Scott, N3FJP, probably has an easier way to do this, so lets see if he

Andre is correct.? There is a port on the rear apron of the IC7300 that requires an A-B (printer type) cable to connect to the computer. There is a second port labeled "remote" which requires a mini

I inadverdently included the GOTA logged contacts into the general log for update to ARRL for Field Day. I need to create a separate log for GOTA. Can someone help provide guidance on uncoupling the

Well, I think I found the problem!!! After some digging and going back to the eQSL web site I went to my profile and I looked at my Start date and End date. The End date was 30 May 2023!!! Duh — I

Just as an addition to my last. I noticed none of my eQSL’s have been sent to eQSL for June or July even though I upload every other day or so and the E usually shows up in the ’Sent Conf By’

When uploading to eQSL my contacts would turn a different color and the ‘E’ would show up in the Sent Conf By column. Here recently that is not happening. Anyone know of why it has changed? I

Hi Phil, Thanks for your e-mail.? Yes, use a text editor such as Notepad to open the file. Enjoy! 73, ScottN3FJP http://www.n3fjp.com 开云体育 the Amateur Radio community with contesting and general

Hi Scott Following your earlier suggestion, I tried to view my MainListColumnWidth3.xml file, which I see is automatically updated every time I close ACL using the latest version of Microsoft Edge but

Dave, I think he’s saying the *type* of USB port, USB-A on the computer side and USB-B on the radio side. I don’t think he’s using A & B similar to saying USB port #1 and USB port #2.

Hi Kevin, Thanks for your e-mail.? I'm sorry you ran into trouble.? Make sure you close AC Log normally before shutting down your PC.? Also, make sure you still have permissions to write to

I have recently moved ACLog (7.0.8) from an old PC to a new one.? I reinstalled ACLog and of course moved the data files as well.? ?However, for whatever reason, my column widths on the main screen

I think you may not be correct on that. Unless I'm doing something wrong. The 7610 comes up with two USB ports for the single USB wire. The 7300 comes up with one. The remote port of the 7300 can be