I inadverdently included the GOTA logged contacts into the general log for update to ARRL for Field Day. I need to create a separate log for GOTA. Can someone help provide guidance on uncoupling the GOTA logged contacts to create a separate GOTA log in N3FJP. Field Day was my first use of this N3FJP logging softrware and I'm a newbie. The good news is that all contacts are now logged. I just need to separate GOTA to earn the points. Please let me know as soon as possible. HELP!
|
Well, I think I found the problem!!! After some digging and going back to the eQSL web site I went to my profile and I looked at my Start date and End date. The End date was 30 May 2023!!! Duh ¡ª I changed that.
So, does anyone know if I have to send all my contacts to eQSL again? I¡¯m assuming the answer is YES. Thanks again.
Dan Morris KZ3T
dbmorris315@...
I live to live for Him!
|
Just as an addition to my last. I noticed none of my eQSL¡¯s have been sent to eQSL for June or July even though I upload every other day or so and the E usually shows up in the ¡¯Sent Conf By¡¯ column. The E is not there and I looked on eQSL and I have no QSL¡¯s for June or July either??? Not sure what is happening so was just wondering if anyone else was experiencing this ?
Thanks
Dan Morris KZ3T
dbmorris315@...
I live to live for Him!
|
When uploading to eQSL my contacts would turn a different color and the ¡®E¡¯ would show up in the Sent Conf By column. Here recently that is not happening. Anyone know of why it has changed? I uploaded to QRZ Logbook and the ¡®Q¡¯ shows up and those Qso¡¯s turn red.
The Sent column does show ¡®Y¡¯ also.
Dan Morris KZ3T
dbmorris315@...
I live to live for Him!
|
Hi Phil,
Thanks for your e-mail.? Yes, use a text editor such as Notepad to open the file.
Enjoy!
73, Scott N3FJP
¿ªÔÆÌåÓý the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Wednesday, July 19, 2023 at 07:14:18 AM EDT, Phil Whitchurch <phil@...> wrote:
Hi Scott
Following your earlier suggestion, I tried to view
my MainListColumnWidth3.xml file, which I see is automatically
updated every time I close ACL using the latest version of
Microsoft Edge but get an error message as below:
This page contains the following errors:
error on line 2 at column 2: StartTag: invalid element name
If I open the file with Notepad, as far as i can see, Line 2 is:
<0>61</0>
and column 2 is the first zero.
Any comments please? Am I doing something wrong? I'm anticipating moving my ACL program and data to another machine in the
near future and want to anticipate any problems beforehand. :-)
73 for now
--
Phil Whitchurch
G3SWH and AD5YS
Work is the curse of the drinking classes.
|
Hi Scott
Following your earlier suggestion, I tried to view
my MainListColumnWidth3.xml file, which I see is automatically
updated every time I close ACL using the latest version of
Microsoft Edge but get an error message as below:
This page contains the following errors:
error on line 2 at column 2: StartTag: invalid element name
If I open the file with Notepad, as far as i can see, Line 2 is:
<0>61</0>
and column 2 is the first zero.
Any comments please? Am I doing something wrong? I'm anticipating moving my ACL program and data to another machine in the
near future and want to anticipate any problems beforehand. :-)
73 for now
--
Phil Whitchurch
G3SWH and AD5YS
Work is the curse of the drinking classes.
|
Re: 7300 CW key AND rig control
Dave, I think he¡¯s saying the?type of USB port, USB-A on the computer side and USB-B on the radio side. I don¡¯t think he¡¯s using A & B similar to saying USB port #1 and USB port #2.
Regardless, did you try the virtual com port software I linked? I use it for RTTY off one cable and it works fine.
Andre, WT9X
|
Re: ACLog column widths keep resetting
#aclog
Hi Kevin,
Thanks for your e-mail.? I'm sorry you ran into trouble.? Make sure you close AC Log normally before shutting down your PC.? Also, make sure you still have permissions to write to MainListColumnWdith3.xml.? To see the location of the file, click File > Show File Locations.
Enjoy!
73, Scott N3FJP
¿ªÔÆÌåÓý the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Tuesday, July 18, 2023 at 09:55:52 PM EDT, Kevin Utzy <krutzy62@...> wrote:
I have recently moved ACLog (7.0.8) from an old PC to a new one.? I reinstalled ACLog and of course moved the data files as well.? ?However, for whatever reason, my column widths on the main screen are not staying where I put them.? If I close ACLog and start it up again the column widths have reset to their original width.? The columns I moved do stay to the position I put them, but the column widths are resetting.? Any ideas why?
73,
Kevin, W4RKU
|
ACLog column widths keep resetting
#aclog
I have recently moved ACLog (7.0.8) from an old PC to a new one.? I reinstalled ACLog and of course moved the data files as well.? ?However, for whatever reason, my column widths on the main screen are not staying where I put them.? If I close ACLog and start it up again the column widths have reset to their original width.? The columns I moved do stay to the position I put them, but the column widths are resetting.? Any ideas why?
73,
Kevin, W4RKU
|
Re: 7300 CW key AND rig control
I think you may not be correct on that.
Unless I'm doing something wrong.
The 7610 comes up with two USB ports for the single USB wire. The
7300 comes up with one.
The remote port of the 7300 can be used with a second wire to get
the second USB port, Unlike the 7610 which only needs the single
USB wire for the two A and B ports. Even the 7610 screen
references USB A and USB B....which the 7300 does not.
....Dave
On 7/18/23 10:43 AM, K8TS wrote:
toggle quoted message
Show quoted text
Hi Dave,
The 7300 has the standard A-B USB port. Which will do the Rig
Control. The other USB is ran off the remote port using a "stereo"
jack. The major difference between the 7610 is that the 7610 has
dual VFO and video out puts. Most other connections are similar. I
am happy with the two USB cables going to different ports rather
than mess with VSPE or port splitters. It will also do through
that set-up ACL when the port is set to None and API is invoked. I
may do some minor changes when I put the FTDX10 in line. Dave
Tassle also makes a cable which allow the remote port to also talk
to my Expert amp. Having rig control is nice if you are a
contester where some contests require exact frequency rather than
band frequency.? Hope this helps. (BTW this setup also allows
flawless FT8 operation with JT Alert running side by side.)
|
Re: 7300 CW key AND rig control
Hi Dave,
The 7300 has the standard A-B USB port. Which will do the Rig Control. The other USB is ran off the remote port using a "stereo" jack. The major difference between the 7610 is that the 7610 has dual VFO and video out puts. Most other connections are similar. I am happy with the two USB cables going to different ports rather than mess with VSPE or port splitters. It will also do through that set-up ACL when the port is set to None and API is invoked. I may do some minor changes when I put the FTDX10 in line. Dave Tassle also makes a cable which allow the remote port to also talk to my Expert amp. Having rig control is nice if you are a contester where some contests require exact frequency rather than band frequency.? Hope this helps. (BTW this setup also allows flawless FT8 operation with JT Alert running side by side.)
|
Re: TROUBLE WITH QRZ UPLOAD.
Hello Kevin. I finally got qrz working.
Support told me to change the date range which I did. Now my
uploads are working. Now I am waiting for a new certificate file
for ARRL for my NU4N call.
Thanks for the help.
On 7/17/2023 12:43 PM, Kevin k5vp
wrote:
toggle quoted message
Show quoted text
I'm wondering how the LOTW would affect the QRZ upload?
However, Juliet sates:? "Direct interface with QRZ Logbook is now available
with Amateur Contact Log 7.0.6 and later! Just click eLogs >
QRZ Logbook to begin. . More details are?.
A second alternative,
since QRZ already allows you to link your LoTW uploads to your
QRZ log, direct QRZ there is an easy way to link your QRZ log to
your automatic LoTW uploads! You'll find all the details on
linking your QRZ account with the data you've uploaded to LoTW?.
Once configured, your
uploaded records are also linked to QRZ when you upload to LoTW!
Of course, another
alternative is to easily upload your log to QRZ by clicking File
> Export ADIF, exporting the records you want to send to QRZ
and then uploading from?."
--
73's Dave NU4N
|
Re: K3 w kio3b n3fjp and vspe
Hi Joe,
Thanks for your e-mail.? There are no issues with the coordination of sending CW and polling your rig with our software.? They are entirely independent functions using two different com ports.
Enjoy!
73, Scott N3FJP
¿ªÔÆÌåÓý the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Monday, July 17, 2023 at 01:49:16 PM EDT, Wes Stewart via groups.io <n7ws@...> wrote:
It's a pity this topic is appearing in two groups, with different messages in each. In:? /g/Elecraft-K3/message/39399, W4TV writes, "N1MM is quite aggressive on its polling. If your issue were how much/fast N3FJP was polling, I would think N1MM would have similar issues. It is more likely that N3FJP does not do a good job of coordinating the separate tasks (polling the rig and sending CW) internally." Anyone care to comment on this?? (It's academic to me, I no longer use Elecraft and I do use Winkey.)
|
Re: K3 w kio3b n3fjp and vspe
Leave off the comma
/g/Elecraft-K3/message/39399
|
Re: K3 w kio3b n3fjp and vspe
It's a pity this topic is appearing in two groups, with different messages in each. In:? /g/Elecraft-K3/message/39399, W4TV writes, "N1MM is quite aggressive on its polling. If your issue were how much/fast N3FJP was polling, I would think N1MM would have similar issues. It is more likely that N3FJP does not do a good job of coordinating the separate tasks (polling the rig and sending CW) internally." Anyone care to comment on this?? (It's academic to me, I no longer use Elecraft and I do use Winkey.)
|
Re: TROUBLE WITH QRZ UPLOAD.
I'm wondering how the LOTW would affect the QRZ upload? However, Juliet sates:? " Direct interface with QRZ Logbook is now available with Amateur Contact Log 7.0.6 and later! Just click eLogs > QRZ Logbook to begin. . More details are?.
A second alternative, since QRZ already allows you to link your LoTW uploads to your QRZ log, direct QRZ there is an easy way to link your QRZ log to your automatic LoTW uploads! You'll find all the details on linking your QRZ account with the data you've uploaded to LoTW?.
Once configured, your uploaded records are also linked to QRZ when you upload to LoTW!
Of course, another alternative is to easily upload your log to QRZ by clicking File > Export ADIF, exporting the records you want to send to QRZ and then uploading from?."
|
Re: TROUBLE WITH QRZ UPLOAD.
I already contacted qrz support but I? am not sure what they are saying about my date range?
--
73's Dave NU4N
|
Re: TROUBLE WITH QRZ UPLOAD.
You may want to talk to QRZ Support.
Lou WA5LOU
On Mon, Jul 17, 2023 at 1:25 PM Dave Tucker Nu4N < dwtucker19@...> wrote: No Lou. It still keeps saying out of range date. My other laptop has no problem. This laptop is hooked up to my ICOM 7300. Using ACLOG of course. Club log works and so does e-qsl. I am waiting on a new certificate for LOTW. I even placed my qrz key over again and still won't up load. I am lost.
Thanks for the reply.
--
73's Dave NU4N
|
Re: TROUBLE WITH QRZ UPLOAD.
No Lou. It still keeps saying out of range date. My other laptop has no problem. This laptop is hooked up to my ICOM 7300. Using ACLOG of course. Club log works and so does e-qsl. I am waiting on a new certificate for LOTW. I even placed my qrz key over again and still won't up load. I am lost.
Thanks for the reply.
--
73's Dave NU4N
|
Hi Mel,
Thanks for your follow up and additional information.? You can either get your friend to configure N1MM for proper ADIF export, or just edit the QSO records manually.
An additional option is to paste in the ADIF tag and value manually for each QSO record using Notepad.
Enjoy!
73, Scott N3FJP
¿ªÔÆÌåÓý the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Monday, July 17, 2023 at 11:31:13 AM EDT, Mel Marcus <melm@...> wrote:
Scott
Not N3FJP fault. My friends house uses n1mm for his rtty contest. when he made the? adi file for me and i imported it, i was notified by the contest dowload group the name? sent was missing. I wanted to be able to bult enter name sent in the n3fjp naqp rtty
program to update the missing field.
I dont? have problems with n3fjp programs
Mel
NE9A
Hi Mel,
Thanks for your e-mail.? Assuming you entered your name in Settings > Setup before the contest, directly under the name you received is the name you sent.? The tag looks like this:
<My_Name:5>Scott
Enjoy!
73, Scott
N3FJP
¿ªÔÆÌåÓý the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give
. But do this with gentleness and respect...
On Sunday, July 16, 2023 at 04:29:42 PM EDT, Mel Marcus <melm@...> wrote:
for some reason my adi file does not have name sent in any contact. is there an easy way to? correct this
Mel
NE9A
|
Randy KO4WTM
Andre - WT9X
K8TS
Wes Stewart
Lou WA5LOU