I just click ignore.? ?it is trying to upload a second time, before aclog does not mark as sent the first time, until lotw confirm receipt.
if time passes, I would do a download first, so maybe the N will change to a Y, and then upload will be ok
Dave Garber VE3WEJ / VE3IE
On Mon, Mar 31, 2025 at 9:10?AM WA2NWN - Charlie via <WA2NWN= [email protected]> wrote:
Hello Everyone,
I use N3FJP ACLog on my home computer in the shack. When operating portable, I use either PoloLog or HAMRS, then export the ADIF into ACLog. However, even before using these portable logging programs, I encountered this error (screenshot attached).
After a day of operating in the shack, my usual process for uploading logs is:
-
I select the Station Location.
-
I click "All Contacts Not Uploaded".
When I do this, a window pops up saying:
"Errors detected – Station location does not match QSO details."
It also shows a message about the grid square.
I typically hit Ignore and select "Upload New QSOs Only". Sometimes, I go back and manually fix the invalid QSO, but the next time I upload, a different QSO shows up with the same invalid grid issue.
Is there a way to permanently fix this? Can it be bypassed? I’m wondering if I misconfigured the software when I first set it up over a decade ago.
Thanks for the help,
Charlie - WA2NWN
?
|
Hello Everyone,
I use N3FJP ACLog on my home computer in the shack. When operating portable, I use either PoloLog or HAMRS, then export the ADIF into ACLog. However, even before using these portable logging programs, I encountered this error (screenshot attached).
After a day of operating in the shack, my usual process for uploading logs is:
-
I select the Station Location.
-
I click "All Contacts Not Uploaded".
When I do this, a window pops up saying:
"Errors detected – Station location does not match QSO details."
It also shows a message about the grid square.
I typically hit Ignore and select "Upload New QSOs Only". Sometimes, I go back and manually fix the invalid QSO, but the next time I upload, a different QSO shows up with the same invalid grid issue.
Is there a way to permanently fix this? Can it be bypassed? I’m wondering if I misconfigured the software when I first set it up over a decade ago.
Thanks for the help,
Charlie - WA2NWN
?
|
Re: Error message at startup
Hello Will,
when starting the program you cannot call up any function and after
a short time
the error (No feedback) appears in German at the top of the menu
bar.
(See picture)
The logbook is then frozen for about 30 seconds. Only then does it
look as if it is loading
the logbook data again and then works normally.
Greetings Joerg (DC9JVN)
Am 30.03.2025 um 18:53 schrieb Will
KN6TZK via groups.io:
toggle quoted message
Show quoted text
What is the exact
wording of the error message?
|
Re: Error message at startup
What is the exact wording of the error message?
?
?
--
Will
KN6TZK
|
Thanks Scott and others for the input. Understanding now where this comes from in the sequence of things I understand. I combed through the log and found several Q's which had been uploaded to LOTW but for some reason had not returned an "L" in the Sent Conf By column.?
?
I also found a few QSO's which had invalid callsigns but had been accepted as a valid QSO by eQSL. I DO NOT use eQSL any longer for reasons most DX'ers will understand.
?
Some of the duplicate QSO's I found were State QSO parties and as Fred suspected were county line operations. I edited those so they would be accepted by LOTW.
?
I did not go as far as doing a bulk edit but that was an option.
?
Thanks all,
?
73,
Alan W4ANT
|
Hi Dave,
Thanks for getting back.
I can log into the site using the same username and password as listed in ACLog and
my eQSL subscription is up-to-date.
I can upload QSOs without any trouble.
OneDrive is a agent of the Evil Empire. I removed it a long time ago and make sure not
to fall for the "backup your computer" question after a Windows update.
73 and Clear Skies,
Brian D. Warner
WB0NWZ
toggle quoted message
Show quoted text
----- Original Message ----- From: Dave Garber via groups.io [mailto:ve3wej@...] To: < [email protected]> Sent: Sat, 29 Mar 2025 16:28:01 -0400 Subject: Re: [N3FJPSoftwareUsers] eQSL Confirmations this was about eqsl, i think I saw, not lotw, but I will ask, can you go to the eqsl website and log in successfully, using the same user name and password? did you check if there was a expiry date on your eqsl?? does aclog match the online credentials?? Dave Garber VE3WEJ / VE3IE On Sat, Mar 29, 2025 at 3:02?PM Brian Warner via groups.io <brian= [email protected]> wrote: > Whenever I try to download eQSL contacts, after uploading, I get the > following: > > > Unable to find the 'Your ADIF log file has been built' tag. Please be sure > your user name and password are correct, that you have entered a date old > enough to include at least one eQSL inbox record and try again. > > Download complete. Please click Done to see the updates on your main list. > * > > I've tried waiting several days without doing any downloads, though I did > uploads, so that the eQSL Inbox might have some unhandled confirmations, > yet I still get the message. When I go to eQSL, the Inbox does have some > QSOs to download/confirm. > > Any help would be appreciated. Otherwise, I have to confirm the QSL > received in the ACLog table manually. > > Thanks, > 73 and Clear Skies, > Brian D. Warner > WB0NWZ > > ----- Original Message ----- > From: Scott Davis via groups.io [mailto:SNKDavis@...] > To: " [email protected]" < [email protected]> > Sent: Sat, 29 Mar 2025 10:08:19 +0000 (UTC) > Subject: Re: [N3FJPSoftwareUsers] What am I missing? > > Hi Alan, > Thanks for your e-mail. That error message is being returned from ARRL's > TQSL software, not AC Log. This FAQ will get you going: > Why am I seeing a message about duplicates when I upload contacts to LoTW? > > https://www.n3fjp.com/faq.html#q71 > > Enjoy! > 73, ScottN3FJP > http://www.n3fjp.com > Serving the Amateur Radio community with contesting and general logging > software since 1997. > 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks > you to give the reason for the hope that you have. But do this with > gentleness and respect... > > On Friday, March 28, 2025 at 09:35:42 PM EDT, Alan W4ANT via groups.io > <alan.w4ant@...> wrote: > > I looked into that, the QSO is marked Y in the sent column although it's > not a LOTW user so it's not confirmed. I deleted all the QSO's from that > callsign and tried again. Again I got the same "line 38" has already been > uploaded but it's a different callsign. When checking that callsign, I'm > finding them marked as sent YES but again not confirmed by LOTW. If it > makes any difference they all seem to be QSO party contacts where I have > multiple contacts on the same day with the same callsign. However, they are > not true duplicates as the time and county information has changeed. Alan > W4ANT > > > > > > > > > > > >
|
Re: Error message at startup
Hello Dave,
no, the program and the logbook data are on my D: drive.
Am 29.03.2025 um 21:30 schrieb Dave Garber via groups.io:
toggle quoted message
Show quoted text
are you storing your log on onedrive, or another cloud service...? ?
|
Re: Error message at startup
are you storing your log on onedrive, or another cloud service...? ? Dave Garber VE3WEJ / VE3IE
Hello Scott,
thanks for the quick answer to my question.
I have switched on the DX Cluster completely and restarted the
program.
Unfortunately, nothing has changed. The program starts, but brings
this message again and after some time,
it loads the logbook content again and then works normally.
I am using Windows 11 and have already reinstalled the program.
Also started with or without Admin. Nothing has changed.
Loading -> no response (approx. 30 seconds) -> then runs
normally.
Thanks for the quick answer though!
Greetings Joerg (DC9JVN)
Am 29.03.2025 um 14:20 schrieb Scott
Davis via :
Hi?Joerg,
Thanks for your
e-mail.? Click Settings > DX Spotting and disable the
function to see if it corrects the problem.? If it does,
select a different telnet host or correct your settings
for the one you are trying to use.
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with
contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an
answer to everyone who asks you to give .
But do this with gentleness and respect...
|
this was about eqsl, i think I saw, not lotw,? ?but I will ask, can? you go to the eqsl website and log in successfully, using the same user name and password?? ? did you check if there was a expiry date on your eqsl??? ?does aclog match the online credentials??
Dave Garber VE3WEJ / VE3IE
Whenever I try to download eQSL contacts, after uploading, I get the following:
Unable to find the 'Your ADIF log file has been built' tag. Please be sure your user name and password are correct, that you have entered a date old enough to include at least one eQSL inbox record and try again.
Download complete. Please click Done to see the updates on your main list.
*
I've tried waiting several days without doing any downloads, though I did uploads, so that the eQSL Inbox might have some unhandled confirmations, yet I still get the message. When I go to eQSL, the Inbox does have some QSOs to download/confirm.
Any help would be appreciated. Otherwise, I have to confirm the QSL received in the ACLog table manually.
Thanks,
73 and Clear Skies,
Brian D. Warner
WB0NWZ
----- Original Message -----
From: Scott Davis via [mailto:SNKDavis=[email protected]]
To: "[email protected]" <[email protected]>
Sent: Sat, 29 Mar 2025 10:08:19 +0000 (UTC)
Subject: Re: [N3FJPSoftwareUsers] What am I missing?
Hi Alan,
Thanks for your e-mail.? That error message is being returned from ARRL's TQSL software, not AC Log.? This FAQ will get you going:
Why am I seeing a message about duplicates when I upload contacts to LoTW?
Enjoy!
73, ScottN3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
On Friday, March 28, 2025 at 09:35:42 PM EDT, Alan W4ANT via <alan.w4ant=[email protected]> wrote:
I looked into that, the QSO is marked Y in the sent column although it's not a LOTW user so it's not confirmed. I deleted all the QSO's from that callsign and tried again. Again I got the same "line 38" has already been uploaded but it's a different callsign. When checking that callsign, I'm finding them marked as sent YES but again not confirmed by LOTW.?If it makes any difference they all seem to be QSO party contacts where I have multiple contacts on the same day with the same callsign. However, they are not true duplicates as the time and county information has changeed.?Alan W4ANT
|
Re: Error message at startup
Hello Larry,
thanks for the quick reply!
I am a paying member of QRZ.COM and the upload and download works without any problems.
I deactivated the menu in the program and then restarted the logbook. As I said, the title screen appears, then the logbook program.
Then it is silent for a short time and then the error message appears. After about 30 seconds, the data is read in again and the logbook runs normally.
I am running Windows 11 with the 64-bit version, but I have already tried the logbook in various compatible modes, but unfortunately without success.
Thanks for your tip though!
Greetings Joerg (DC9JVN)
Am 29.03.2025 um 18:27 schrieb Larry Banks via groups.io:
toggle quoted message
Show quoted text
Are you trying to download from QRZ as well?? If so, check that your account is active and up-to-date.
Larry / W1DYJ
|
Whenever I try to download eQSL contacts, after uploading, I get the following:
Unable to find the 'Your ADIF log file has been built' tag. Please be sure your user name and password are correct, that you have entered a date old enough to include at least one eQSL inbox record and try again.
Download complete. Please click Done to see the updates on your main list.
*
I've tried waiting several days without doing any downloads, though I did uploads, so that the eQSL Inbox might have some unhandled confirmations, yet I still get the message. When I go to eQSL, the Inbox does have some QSOs to download/confirm.
Any help would be appreciated. Otherwise, I have to confirm the QSL received in the ACLog table manually.
Thanks,
73 and Clear Skies,
Brian D. Warner
WB0NWZ
toggle quoted message
Show quoted text
----- Original Message ----- From: Scott Davis via groups.io [mailto:SNKDavis@...] To: " [email protected]" < [email protected]> Sent: Sat, 29 Mar 2025 10:08:19 +0000 (UTC) Subject: Re: [N3FJPSoftwareUsers] What am I missing? Hi Alan, Thanks for your e-mail.? That error message is being returned from ARRL's TQSL software, not AC Log.? This FAQ will get you going: Why am I seeing a message about duplicates when I upload contacts to LoTW? https://www.n3fjp.com/faq.html#q71 Enjoy! 73, ScottN3FJP http://www.n3fjp.com Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect... On Friday, March 28, 2025 at 09:35:42 PM EDT, Alan W4ANT via groups.io <alan.w4ant@...> wrote: I looked into that, the QSO is marked Y in the sent column although it's not a LOTW user so it's not confirmed. I deleted all the QSO's from that callsign and tried again. Again I got the same "line 38" has already been uploaded but it's a different callsign. When checking that callsign, I'm finding them marked as sent YES but again not confirmed by LOTW.?If it makes any difference they all seem to be QSO party contacts where I have multiple contacts on the same day with the same callsign. However, they are not true duplicates as the time and county information has changeed.?Alan W4ANT
|
Re: Error message at startup
Hi Joerg,
Thanks for your follow up.? I'm sorry you are still having trouble.? In addition to Larry's suggestion, also try setting rig interface to None.? If that doesn't correct the problem, try disabling the API.? One of your settings is timing out and it is just a matter of figuring out which one and then correcting the setting.
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
Are you trying to download from QRZ as
well?? If so, check that your account is active and up-to-date.
Larry / W1DYJ
On 3/29/2025 13:11, Joerg Volland
wrote:
Hello Scott,
thanks for the quick answer to my question.
I have switched on the DX Cluster completely and restarted the
program.
Unfortunately, nothing has changed. The program starts, but brings
this message again and after some time,
it loads the logbook content again and then works normally.
I am using Windows 11 and have already reinstalled the program.
Also started with or without Admin. Nothing has changed.
Loading -> no response (approx. 30 seconds) -> then runs
normally.
Thanks for the quick answer though!
Greetings Joerg (DC9JVN)
Am 29.03.2025 um 14:20 schrieb Scott
Davis via groups.io:
Hi?Joerg,
Thanks for
your e-mail.? Click Settings > DX Spotting and
disable the function to see if it corrects the
problem.? If it does, select a different telnet host
or correct your settings for the one you are trying to
use.
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with
contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an
answer to everyone who asks you to give .
But do this with gentleness and respect...
|
Re: Error message at startup
Are you trying to download from QRZ as
well?? If so, check that your account is active and up-to-date.
Larry / W1DYJ
On 3/29/2025 13:11, Joerg Volland
wrote:
toggle quoted message
Show quoted text
Hello Scott,
thanks for the quick answer to my question.
I have switched on the DX Cluster completely and restarted the
program.
Unfortunately, nothing has changed. The program starts, but brings
this message again and after some time,
it loads the logbook content again and then works normally.
I am using Windows 11 and have already reinstalled the program.
Also started with or without Admin. Nothing has changed.
Loading -> no response (approx. 30 seconds) -> then runs
normally.
Thanks for the quick answer though!
Greetings Joerg (DC9JVN)
Am 29.03.2025 um 14:20 schrieb Scott
Davis via groups.io:
Hi?Joerg,
Thanks for
your e-mail.? Click Settings > DX Spotting and
disable the function to see if it corrects the
problem.? If it does, select a different telnet host
or correct your settings for the one you are trying to
use.
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with
contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an
answer to everyone who asks you to give .
But do this with gentleness and respect...
|
Re: Error message at startup
Hello Scott,
thanks for the quick answer to my question.
I have switched on the DX Cluster completely and restarted the
program.
Unfortunately, nothing has changed. The program starts, but brings
this message again and after some time,
it loads the logbook content again and then works normally.
I am using Windows 11 and have already reinstalled the program.
Also started with or without Admin. Nothing has changed.
Loading -> no response (approx. 30 seconds) -> then runs
normally.
Thanks for the quick answer though!
Greetings Joerg (DC9JVN)
Am 29.03.2025 um 14:20 schrieb Scott
Davis via groups.io:
toggle quoted message
Show quoted text
Hi?Joerg,
Thanks for your
e-mail.? Click Settings > DX Spotting and disable the
function to see if it corrects the problem.? If it does,
select a different telnet host or correct your settings
for the one you are trying to use.
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with
contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an
answer to everyone who asks you to give .
But do this with gentleness and respect...
|
Re: Error message at startup
Hi?Joerg,
Thanks for your e-mail.? Click Settings > DX Spotting and disable the function to see if it corrects the problem.? If it does, select a different telnet host or correct your settings for the one you are trying to use.
Enjoy!
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
When I start the program, I first get the message at the top for a while (no response).
Only after a certain time does the program start normally and then reload the logbook.
Before that, no function works in the program.
?
73! Joerg (DC9JVN)
|
When I start the program, I first get the message at the top for a while (no response).
Only after a certain time does the program start normally and then reload the logbook.
Before that, no function works in the program.
?
73! Joerg (DC9JVN)
|
Alan,
Since you said it was a QSO party and you had multiple qso's with the same station could it be you worked him on a County Line? If you log a qso and all info is the same, including date and time LOTW will reject as a dupe. You have to change the time of one of the qso's by at least a minute to make LOTW happy.
I don't believe LOTW looks at the County name so that could be the problem. I have worked 3 and 4 county lines in the past and have to fudge the time of the qso to make it go through.
--
73
Fred
K2DFC
|
Hi Alan,
Thanks for your e-mail.? That error message is being returned from ARRL's TQSL software, not AC Log.? This FAQ will get you going:
Enjoy!
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
I looked into that, the QSO is marked Y in the sent column although it's not a LOTW user so it's not confirmed. I deleted all the QSO's from that callsign and tried again. Again I got the same "line 38" has already been uploaded but it's a different callsign. When checking that callsign, I'm finding them marked as sent YES but again not confirmed by LOTW.
?
If it makes any difference they all seem to be QSO party contacts where I have multiple contacts on the same day with the same callsign. However, they are not true duplicates as the time and county information has changeed.
?
Alan W4ANT
|
I looked into that, the QSO is marked Y in the sent column although it's not a LOTW user so it's not confirmed. I deleted all the QSO's from that callsign and tried again. Again I got the same "line 38" has already been uploaded but it's a different callsign. When checking that callsign, I'm finding them marked as sent YES but again not confirmed by LOTW.
?
If it makes any difference they all seem to be QSO party contacts where I have multiple contacts on the same day with the same callsign. However, they are not true duplicates as the time and county information has changeed.
?
Alan W4ANT
|
Re: ACLog to Yaesu FTDX10 radio
I had just looked at the setup menu in the radio, and the manual, and found 38,400 right away
Dave Garber VE3WEJ / VE3IE On Fri, Mar 28, 2025 at 6:22?PM George Merkle N0GM via <grmjunior= [email protected]> wrote:
I am out of town, but back in Austin in Tuesday. If you are still having problems, send me a note and I will go through my settings for my FTDX10 with you. My email is on QRZ. Good luck! George?N0?GM
? OK, Current Situation,
?
To straight to the point, I started at 1.2 Baud Rate and worked my way up. At 38.4 BPS everything started working.?
?
I made sure I saved the profile.? This fix works on both the "Yaesu 991" or "Yaesu-Newer" profile.? Before things broke, I had the speed set at 4.8 PBS.? At this point, I can't explain it but it is working and that is all I am concerned with!
?
Thanks for the usual quick response.
?
73,
Lowell Yates,
President, White House Communications Agency Amateur Radio Club - W3HCA
|
WA2NWN - Charlie
Larry Banks