Alan,
Since you said it was a QSO party and you had multiple qso's with the same station could it be you worked him on a County Line? If you log a qso and all info is the same, including date and time LOTW will reject as a dupe. You have to change the time of one of the qso's by at least a minute to make LOTW happy.
I don't believe LOTW looks at the County name so that could be the problem. I have worked 3 and 4 county lines in the past and have to fudge the time of the qso to make it go through.
--
73
Fred
K2DFC
|
Hi Alan,
Thanks for your e-mail.? That error message is being returned from ARRL's TQSL software, not AC Log.? This FAQ will get you going:
Enjoy!
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
I looked into that, the QSO is marked Y in the sent column although it's not a LOTW user so it's not confirmed. I deleted all the QSO's from that callsign and tried again. Again I got the same "line 38" has already been uploaded but it's a different callsign. When checking that callsign, I'm finding them marked as sent YES but again not confirmed by LOTW.
?
If it makes any difference they all seem to be QSO party contacts where I have multiple contacts on the same day with the same callsign. However, they are not true duplicates as the time and county information has changeed.
?
Alan W4ANT
|
I looked into that, the QSO is marked Y in the sent column although it's not a LOTW user so it's not confirmed. I deleted all the QSO's from that callsign and tried again. Again I got the same "line 38" has already been uploaded but it's a different callsign. When checking that callsign, I'm finding them marked as sent YES but again not confirmed by LOTW.
?
If it makes any difference they all seem to be QSO party contacts where I have multiple contacts on the same day with the same callsign. However, they are not true duplicates as the time and county information has changeed.
?
Alan W4ANT
|
Re: ACLog to Yaesu FTDX10 radio
I had just looked at the setup menu in the radio, and the manual, and found 38,400 right away
Dave Garber VE3WEJ / VE3IE On Fri, Mar 28, 2025 at 6:22?PM George Merkle N0GM via <grmjunior= [email protected]> wrote:
I am out of town, but back in Austin in Tuesday. If you are still having problems, send me a note and I will go through my settings for my FTDX10 with you. My email is on QRZ. Good luck! George?N0?GM
? OK, Current Situation,
?
To straight to the point, I started at 1.2 Baud Rate and worked my way up. At 38.4 BPS everything started working.?
?
I made sure I saved the profile.? This fix works on both the "Yaesu 991" or "Yaesu-Newer" profile.? Before things broke, I had the speed set at 4.8 PBS.? At this point, I can't explain it but it is working and that is all I am concerned with!
?
Thanks for the usual quick response.
?
73,
Lowell Yates,
President, White House Communications Agency Amateur Radio Club - W3HCA
|
n3fjp does not mark as sent, until lotw confirms the upload. so, it may be already uploaded, but not marked yet, so I just tell it to ignore, and move on.? ?it will correct itself, on the next download
Dave Garber VE3WEJ / VE3IE
Hi group,
?
Regarding N3FJP AC Log and uploading to LOTW. I've eliminated any QSO's which were before LOTW so I would not get an error for "outside of date range"
?
Now, when I select ALL CONTACTS NOT UPLOADED, I inevitably get a pop up box as I have attached. I'm asking the program to upload any contacts not already uploaded yet I get this popup.
?
Someone in the group I'm sure can tell me where I am in error.
?
Also, is it possible to take another users formatting and apply it to my logbook. I know there are guys who have customized the layout very nicely and I'm just looking for a shortcut.?
?
Thanks in advance.
?
Alan W4ANT
|
Hi group,
?
Regarding N3FJP AC Log and uploading to LOTW. I've eliminated any QSO's which were before LOTW so I would not get an error for "outside of date range"
?
Now, when I select ALL CONTACTS NOT UPLOADED, I inevitably get a pop up box as I have attached. I'm asking the program to upload any contacts not already uploaded yet I get this popup.
?
Someone in the group I'm sure can tell me where I am in error.
?
Also, is it possible to take another users formatting and apply it to my logbook. I know there are guys who have customized the layout very nicely and I'm just looking for a shortcut.?
?
Thanks in advance.
?
Alan W4ANT
|
Re: ACLog to Yaesu FTDX10 radio
I am out of town, but back in Austin in Tuesday. If you are still having problems, send me a note and I will go through my settings for my FTDX10 with you. My email is on QRZ.
toggle quoted message
Show quoted text
On Mar 28, 2025, at 4:12?PM, Lowell Yates via groups.io <kd8hd@...> wrote:
? OK, Current Situation,
?
To straight to the point, I started at 1.2 Baud Rate and worked my way up. At 38.4 BPS everything started working.?
?
I made sure I saved the profile.? This fix works on both the "Yaesu 991" or "Yaesu-Newer" profile.? Before things broke, I had the speed set at 4.8 PBS.? At this point, I can't explain it but it is working and that is all I am concerned with!
?
Thanks for the usual quick response.
?
73,
Lowell Yates,
President, White House Communications Agency Amateur Radio Club - W3HCA
|
Re: ACLog to Yaesu FTDX10 radio
OK, Current Situation,
?
To straight to the point, I started at 1.2 Baud Rate and worked my way up. At 38.4 BPS everything started working.?
?
I made sure I saved the profile.? This fix works on both the "Yaesu 991" or "Yaesu-Newer" profile.? Before things broke, I had the speed set at 4.8 PBS.? At this point, I can't explain it but it is working and that is all I am concerned with!
?
Thanks for the usual quick response.
?
73,
Lowell Yates,
President, White House Communications Agency Amateur Radio Club - W3HCA
|
Re: ACLog to Yaesu FTDX10 radio
I have tried that but let me try that again.
?
Thanks
?
73,
Lowell
President, White House Communications Agency Amateur Radio Club
|
C. run error: Empty or Wrong callsign
Hi All
I normally run contests until by own callsign VE9CF, but for WPX this weekend I have XM9A
I setup N3FJP like I normally do, changed the callsign from VE9CF or XM9A after I put in the registration code.
When I try to test the score distributor, I get the response C. run error: Empty or Wrong callsign
Hamdash worked fine
----
|
|
|
Stuart R. Crawford
|
|
Amateur Radio Operator - VE9CF
|
|
Email me >>>
stuart@...
|
|
Visit My Website >>>
|
|
Phone: (506) 899-3102
|
|
|
Re: ACLog to Yaesu FTDX10 radio
Hi Lowell,
Thanks for your e-mail.? User Yaesu - Newer 2 for your Yaesu 10.? Lots more details here:
Enjoy!
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
Hi folks,
?
Issue.? I have a new Yaesu FTdx10 radio.? I was able to get ACLog and the radio to work in the beginning.? I had to put my radio back into factory default for a radio issue.
?
I am now not able to get ACLog to update the frequency and mode, etc.
?
This is what I have done to troubleshoot.
?
1. Uninstalled and reinstalled ACLog? but I don't think it was a complete deinstall because the current log files are loaded back.
2. Reinstalled the Yaesu Virtual Comport drivers
3 Enabled polling in the ACLogs Settings>Rig Interface panel.? Com 3 will poll correctly when the "poll" button is pressed
4.? I am able to insert a frequency and "send" it.? ACLog will update but the radio will not. The radio will not update ACLog when I QSY.
5.? I loaded Win4YaesuSuite which is a program where I can operate the radio from a computer screen.? Everything works fine using that program so I know the radio CAT interface is working.?
?
Suggestions?? inquiring minds want to know.
73,
Lowell
President, White House Communications Agency Amateur Radio Club
?
|
ACLog to Yaesu FTDX10 radio
Hi folks,
?
Issue.? I have a new Yaesu FTdx10 radio.? I was able to get ACLog and the radio to work in the beginning.? I had to put my radio back into factory default for a radio issue.
?
I am now not able to get ACLog to update the frequency and mode, etc.
?
This is what I have done to troubleshoot.
?
1. Uninstalled and reinstalled ACLog? but I don't think it was a complete deinstall because the current log files are loaded back.
2. Reinstalled the Yaesu Virtual Comport drivers
3 Enabled polling in the ACLogs Settings>Rig Interface panel.? Com 3 will poll correctly when the "poll" button is pressed
4.? I am able to insert a frequency and "send" it.? ACLog will update but the radio will not. The radio will not update ACLog when I QSY.
5.? I loaded Win4YaesuSuite which is a program where I can operate the radio from a computer screen.? Everything works fine using that program so I know the radio CAT interface is working.?
?
Suggestions?? inquiring minds want to know.
73,
Lowell
President, White House Communications Agency Amateur Radio Club
?
|
Thanks Scott! ?I was completely fistrgarding thr DX spits feature in relation to the map, but that makes sense!
?
?All the best,
--
Bill W1WH
|
Hi Bill,
Thanks for your e-mail.? When you tab from the Call field, the pin appears and is red as in this example:
If you leave the button displaying Show Logged QSO, after you press enter, it will remain and turn blue.? If you click the button so that is says Hide Logged QSO, it will disappear completely.? Lots more details on how our World Map works are here (and it has become a very valuable tool for me on contest weekends):
If by it you are referring to the map itself instead of the associated pin, the use case for most is to display spots / potential stations to work, so I would not want it to disappear.??
Enjoy!
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
When the World Map is toggled on, is there a way to get it to appear when entering a new QSO and then disappear when logging the completed Q (similar to the behavior exhibited by the QRZ image being displayed and then cleared)?
--
Bill W1WH
|
When the World Map is toggled on, is there a way to get it to appear when entering a new QSO and then disappear when logging the completed Q (similar to the behavior exhibited by the QRZ image being displayed and then cleared)?
--
Bill W1WH
|
Thank you Dave, did not realize your email was directed elsewhere.? I used the column sort to fix my issues. Thanks to all who replied.
Bob, KD6C ?
toggle quoted message
Show quoted text
From: [email protected] On Behalf Of Dave B via groups.io
Sent: Thursday, March 27, 2025 10:18 AM
To: [email protected]
Subject: Re: [N3FJPSoftwareUsers] Wildcard for Search? OK Bob, I was replying to Mikes questions.? I don't know if it would help you at all, but once you sort that column by that field, you can select the records you're interested in, then go to "Edit" menu and select "copy selected records to clipboard".? You can then paste that into spreadsheet or document.
|
OK Bob, I was replying to Mikes questions.? I don't know if it would help you at all, but once you sort that column by that field, you can select the records you're interested in, then go to "Edit" menu and select "copy selected records to clipboard".? You can then paste that into spreadsheet or document.
Dave WA2OTC
|
Yes, I know how to search a partial callsign. This question related to doing a search on another data field. A custom field I created to keep track of JA cities and guns. Scott answered that there is no wildcard capability, you can sort that column alpha and scroll down the list.
Bob, KD6C ?
toggle quoted message
Show quoted text
From: [email protected] On Behalf Of Dave B via groups.io
Sent: Thursday, March 27, 2025 5:05 AM
To: [email protected]
Subject: Re: [N3FJPSoftwareUsers] Wildcard for Search? If you click Find to search the callsign field, and type in "C6", it will find matches for any call sign where C6 appears anywhere in the call.? For example C6AA, TC6ZZ, AC6B would all be listed in the results. When you click on a field header to sort by that field, I think it is just a temporary list.? I don't think there is a way to save that as your preferred sort.?
|
If you click Find to search the callsign field, and type in "C6", it will find matches for any call sign where C6 appears anywhere in the call.? For example C6AA, TC6ZZ, AC6B would all be listed in the results.
?
When you click on a field header to sort by that field, I think it is just a temporary list.? I don't think there is a way to save that as your preferred sort.?
|
I use the find button, and only type prefix, and put a check box in the 'partial'? ? ? ?I have never wanted to keep in other than by date, so dont know the last part of your question
Dave Garber VE3WEJ / VE3IE On Thu, Mar 27, 2025 at 7:49?AM mike mcglashon via <michael.mcglashon= [email protected]> wrote:
Quoting: click on the column header for the column of interest to temporarily sort all your currently listed items. End quote: Okay, how do you make the sorted column permanent? Also, you never said what the magical wildcard character is, such as * or # or whatever. ? ? ? ? Thanks for your e-mail.? The only wild cards that are used are with the Find function, specific to call signs..? To list QSO records with similar starting values, click on the column header for the column of interest to temporarily sort all your currently listed items. Serving the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Wednesday, March 26, 2025 at 07:53:19 PM EDT, Bob Revel via <kd6c.ham@...> wrote: I know the answer is out there but cannot find it. I want to be able to search one of the custom fields I made (JARL City/Gun number and name) and want to search by just part of the data. For example, for data = 1051 - Nakagawa, I want to be able to searchand find all QSO records that have data starting with 1051. I tried asterick (*) and $, did not work. Appreciate a solution (assuming there is one).? FYI - just entered my 25,000th QSO into N3FJP last week. Awesome software.
|
Bill W1WH