Hi Mel,
Thanks for your follow up and additional information.? You can either get your friend to configure N1MM for proper ADIF export, or just edit the QSO records manually.
An additional option is to paste in the ADIF tag and value manually for each QSO record using Notepad.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Monday, July 17, 2023 at 11:31:13 AM EDT, Mel Marcus <melm@...> wrote:
Scott
Not N3FJP fault. My friends house uses n1mm for his rtty contest. when he made the? adi file for me and i imported it, i was notified by the contest dowload group the name? sent was missing. I wanted to be able to bult enter name sent in the n3fjp naqp rtty
program to update the missing field.
I dont? have problems with n3fjp programs
Mel
NE9A
Hi Mel,
Thanks for your e-mail.? Assuming you entered your name in Settings > Setup before the contest, directly under the name you received is the name you sent.? The tag looks like this:
<My_Name:5>Scott
Enjoy!
73, Scott
N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give
. But do this with gentleness and respect...
On Sunday, July 16, 2023 at 04:29:42 PM EDT, Mel Marcus <melm@...> wrote:
for some reason my adi file does not have name sent in any contact. is there an easy way to? correct this
Mel
NE9A
|
Re: TROUBLE WITH QRZ UPLOAD.
Is there a mistake in your QSO date somewhere in the upload??
Lou WA5LOU
On Mon, Jul 17, 2023 at 12:15?PM Dave Tucker Nu4N < dwtucker19@...> wrote: I am not sure if this is the place to ask my question. I am having problem with up loading to QRZ. My expiration is Jan 24. When I try and up load it rejects and says out of date range?
Any help would be appreciated.
Thanks
--
73's Dave NU4N
|
I am not sure if this is the place to ask my question. I am having problem with up loading to QRZ. My expiration is Jan 24. When I try and up load it rejects and says out of date range?
Any help would be appreciated.
Thanks
--
73's Dave NU4N
|
N3FJP worked flawlessly for me, but I was controlling the FT-710 and feeding N3FJP with N7YG Digital Engine in RTTY mode. You may want to consider that and run AFSK.
Dennis - WU6X
|
Scott
Not N3FJP fault. My friends house uses n1mm for his rtty contest. when he made the? adi file for me and i imported it, i was notified by the contest dowload group the name? sent was missing. I wanted to be able to bult enter name sent in the n3fjp naqp rtty
program to update the missing field.
I dont? have problems with n3fjp programs
Mel
NE9A
toggle quoted message
Show quoted text
Hi Mel,
Thanks for your e-mail.? Assuming you entered your name in Settings > Setup before the contest, directly under the name you received is the name you sent.? The tag looks like this:
<My_Name:5>Scott
Enjoy!
73, Scott
N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give
. But do this with gentleness and respect...
On Sunday, July 16, 2023 at 04:29:42 PM EDT, Mel Marcus <melm@...> wrote:
for some reason my adi file does not have name sent in any contact. is there an easy way to? correct this
Mel
NE9A
|
Re: 7300 CW key AND rig control
Dale.....
What rig?
I don't think the 7300 has USB A-B.
....Dave
On 7/17/23 8:57 AM, K8TS wrote:
toggle quoted message
Show quoted text
Good Morning All
On mine I use two com ports, one for rig control and the other for
cw. Works fine. I use the paddle setting in the menu. (I know it
says set to straight key, but paddle works fine). I will get an
error message that cw and rig interface will not run on the same
cable. Never experimented with a splitter. Using the standard
Silicone Labs drivers. If running FTx, I can change the rig to
none and run the API on ACL, otherwise used on contest programs.
Your USB A-B port will be your rig control line.
Dale K8TS
|
Re: 7300 CW key AND rig control
Good Morning All
On mine I use two com ports, one for rig control and the other for cw. Works fine. I use the paddle setting in the menu. (I know it says set to straight key, but paddle works fine). I will get an error message that cw and rig interface will not run on the same cable. Never experimented with a splitter. Using the standard Silicone Labs drivers. If running FTx, I can change the rig to none and run the API on ACL, otherwise used on contest programs. Your USB A-B port will be your rig control line.
Dale K8TS
|
Thanks for the reply. I have my logs
backed up on a USB drive every time I exit the program. So I
imported the latest mdb file I and good to go.
73's NU4N Dave
On 7/17/2023 6:23 AM, Scott Davis via
groups.io wrote:
toggle quoted message
Show quoted text
Hi Dave,
Thanks for your e-mail.? Your log file
isn't associated with the rig you have selected from
the rig interface form.? You can restore your AC Log
log file from backup as detailed here:
Enjoy!
73, Scott
N3FJP
开云体育 the Amateur Radio community with
contesting and general logging software since
1997.
1 Peter 3 vs 15: Always be
prepared to give an answer to everyone who
asks you to give . But do this with gentleness
and respect...
On Saturday, July 15, 2023 at 07:03:16 PM EDT, Dave
Tucker Nu4N <dwtucker19@...> wrote:
I
had a hard drive crash on my Desktop that is hooked to
my Kenwood 2000. I write a back file to my USB D
drive. Also I do the same for? my ICOM 7300.
I was wondering if I save and adif file on the ICOM
7300. Then load my mdb file from the Kenwood which
dated 7/15 before my crash. Should I save a ADIF flle
on the ICOM 7300 so I at least don't loose any qso's.
Should I start a new file on my ICOM and upload my
Kenwood MDB file?
I hope I explained this ok?
Thanks
--
73's Dave NU4N
--
73's Dave NU4N
|
Thanks for the good report and information Dave!
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Sunday, July 16, 2023 at 04:45:11 PM EDT, Dave Edwards <kd2e@...> wrote:
The problem was the auto upload to LoTW. !!
Turned that off, and problem solved!
Switched my active log from Onedrive to my local C drive, and
that seems to have helped a bit more.
Thanks to everyone for the help!
Best 73!
Dave KD2E
On 7/16/23 3:07 PM, Kevin Gray wrote:
Dave
It could be internet latency.
Is your log on a local drive, or is it in
the cloud ?? (Onedrive, Google drive, etc)
Are you set to “Real time upload” to any
of the eLog ?? (eQSL, LoTW, QRZ Logbook)
?
Any of these could be the cause
?
Putting your log on a local drive, and
temporarily turn off all lookup (QRZ) or eLog upload features,
could quickly determine if these are contributing to you
issue.
?
?
Kevin
N9VPV
-. ----. …- .--. …-
?
?
?
?
Scott....On the TSM delay I mentioned earlier, is it possible
the error indication below might help?
It seems when it it trying to write the new contact to the
logbook AND send the F3 contents at the same time, it seems to
have an issue doing too much???? (below)
(The problem is in TSM mode, the tab sends F2 contents just
fine, but enter does not send F3 contents until about 5
seconds after hitting enter.? F3 alone works fine)
....Dave
?
On 7/11/23 7:58 AM, Scott Davis via
groups.io wrote:
Thanks
for your e-mail.? I'm sorry that you are still
having trouble.? I've already replied to your
thread here:
I
don't currently have any additional insights
to add, but I will continue to try and
duplicate what you are experiencing.
开云体育
the Amateur Radio community with
contesting and general logging software
since 1997.
1
Peter 3 vs 15: Always be prepared to
give an answer to everyone who asks you
to give .
But do this with gentleness and respect...
On
Monday, July 10, 2023 at 05:38:33 PM EDT, Dave
Edwards <kd2e@...>
wrote:
Can
you suggest what to look at for this scenario?
I
have an Icom 7610, and all is working, but...
When
sending CW from messages in F registers using
TSM,
The
tab correctly sends the contents of F2, but
the
return sends the contents of F3 after about a 3
second delay.
It
all works, except for the delay.? The computer
is pretty fast and
don't
think its a matter of a slow cpu.? Hitting F3
sends the contents
|
Hi Mel,
Thanks for your e-mail.? Assuming you entered your name in Settings > Setup before the contest, directly under the name you received is the name you sent.? The tag looks like this:
<My_Name:5>Scott
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Sunday, July 16, 2023 at 04:29:42 PM EDT, Mel Marcus <melm@...> wrote:
for some reason my adi file does not have name sent in any contact. is there an easy way to? correct this
Mel
NE9A
|
Hi Dave,
Thanks for your e-mail.? Your log file isn't associated with the rig you have selected from the rig interface form.? You can restore your AC Log log file from backup as detailed here:
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Saturday, July 15, 2023 at 07:03:16 PM EDT, Dave Tucker Nu4N <dwtucker19@...> wrote:
I had a hard drive crash on my Desktop that is hooked to my Kenwood 2000. I write a back file to my USB D drive. Also I do the same for? my ICOM 7300.
I was wondering if I save and adif file on the ICOM 7300. Then load my mdb file from the Kenwood which dated 7/15 before my crash. Should I save a ADIF flle on the ICOM 7300 so I at least don't loose any qso's. Should I start a new file on my ICOM and upload my Kenwood MDB file?
I hope I explained this ok?
Thanks
--
73's Dave NU4N
|
Re: 7300 CW key AND rig control
I use VSPE with my 7300 for doing RTTY off a single cable and seems to work fine.?
Andre, WT9X
|
Oh, yes...I see you did, sorry 'bout that Mitch!!
I had installed AClog on another (very cheap) laptop, and it
worked ok.
So, I was preoccupied with A-B comparing the two to find out what
the heck was the difference!
When checking the "auto-upload" to QSL thing checkbox, there
should be a pop-up indicating it may
impact TSM operation.
- Does your ACLog database reside on your PC or in the
Cloud?
- Do you have the setting enabled to upload to LOTW after each
logged QSO?
Tnx agn, 73!
Dave? KD2E
73, Mitch
On 7/16/23 7:15 PM, Mitch NW0M via
groups.io wrote:
toggle quoted message
Show quoted text
On Sun, Jul 16, 2023 at 03:45 PM, Dave Edwards wrote:
The problem was the auto upload to
LoTW. !!
That's what I asked you five days ago!!!? Glad you got it
working...
73, Mitch
|
Hi Don,
Thanks for your e-mail.? The data is retrieved from any callbook lookups you may have configured, not the previous record.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Sunday, July 16, 2023 at 08:12:56 PM EDT, Don W7WLL <w7wll@...> wrote:
Need some guidance.
Entering a call who was 'activating' two lighthouses (differing names and numbers). Entered first and deleted County and Grid because they were wrong. Ckiked on Recall to enter second LH number. The recalled line did NOT show County or Grid (which I'd deleted).
But, when I entered the second LH number boththe old County and Grid popped back up and I had to go through the delete process again.
Apparently if a new data record is entered it automatically pulls the deleted information back up.
Is this normal or am i missing something?
Don W7WLL
|
Need some guidance.
Entering a call who was 'activating' two lighthouses (differing names and numbers). Entered first and deleted County and Grid because they were wrong. Ckiked on Recall to enter second LH number. The recalled line did NOT show County or Grid (which I'd deleted).
But, when I entered the second LH number boththe old County and Grid popped back up and I had to go through the delete process again.
Apparently if a new data record is entered it automatically pulls the deleted information back up.
Is this normal or am i missing something?
Don W7WLL
|
On Sun, Jul 16, 2023 at 03:45 PM, Dave Edwards wrote:
The problem was the auto upload to LoTW. !!
That's what I asked you five days ago!!!? Glad you got it working... 73, Mitch
|
Re: .mdb to .adif Converter
You should use the export tool under the file drop down. Export creates an adif file
73
toggle quoted message
Show quoted text
On Jul 16, 2023, at 18:12, Patrick Dickey <patrick.c.dickey@...> wrote:
? If they are open source, you might be able to create a script (batch file since it’s Windows) that provides the interaction. Or tweak their main methods to include parameters that you pass in for the interaction. Then, you create a scheduled task to run the script (or just run the program with the arguments passed). ? Have a great day. ?
Patrick. ? ? I'm trying to automate a process that will run several times a day without user interaction so I need the converter to be non-interactive and able to be run from a Windows command-line.? I'm hoping there is such a tool out here.? I have found a couple but they require interaction.
|
Re: .mdb to .adif Converter
If they are open source, you might be able to create a script (batch file since it’s Windows) that provides the interaction. Or tweak their main methods to include parameters that you pass in for the interaction. Then, you create a scheduled task to run the script (or just run the program with the arguments passed). ? Have a great day. ?
Patrick. ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of ckmcdonald Sent: Sunday, July 16, 2023 11:29 AM To: [email protected]Subject: Re: [N3FJPSoftwareUsers] .mdb to .adif Converter ? I'm trying to automate a process that will run several times a day without user interaction so I need the converter to be non-interactive and able to be run from a Windows command-line.? I'm hoping there is such a tool out here.? I have found a couple but they require interaction.
|
The problem was the auto upload to LoTW. !!
Turned that off, and problem solved!
Switched my active log from Onedrive to my local C drive, and
that seems to have helped a bit more.
Thanks to everyone for the help!
Best 73!
Dave KD2E
On 7/16/23 3:07 PM, Kevin Gray wrote:
toggle quoted message
Show quoted text
Dave
It could be internet latency.
Is your log on a local drive, or is it in
the cloud ?? (Onedrive, Google drive, etc)
Are you set to “Real time upload” to any
of the eLog ?? (eQSL, LoTW, QRZ Logbook)
?
Any of these could be the cause
?
Putting your log on a local drive, and
temporarily turn off all lookup (QRZ) or eLog upload features,
could quickly determine if these are contributing to you
issue.
?
?
Kevin
N9VPV
-. ----. …- .--. …-
?
?
?
?
Scott....On the TSM delay I mentioned earlier, is it possible
the error indication below might help?
It seems when it it trying to write the new contact to the
logbook AND send the F3 contents at the same time, it seems to
have an issue doing too much???? (below)
(The problem is in TSM mode, the tab sends F2 contents just
fine, but enter does not send F3 contents until about 5
seconds after hitting enter.? F3 alone works fine)
....Dave
?
On 7/11/23 7:58 AM, Scott Davis via
groups.io wrote:
Thanks
for your e-mail.? I'm sorry that you are still
having trouble.? I've already replied to your
thread here:
I
don't currently have any additional insights
to add, but I will continue to try and
duplicate what you are experiencing.
开云体育
the Amateur Radio community with
contesting and general logging software
since 1997.
1
Peter 3 vs 15: Always be prepared to
give an answer to everyone who asks you
to give .
But do this with gentleness and respect...
On
Monday, July 10, 2023 at 05:38:33 PM EDT, Dave
Edwards <kd2e@...>
wrote:
Can
you suggest what to look at for this scenario?
I
have an Icom 7610, and all is working, but...
When
sending CW from messages in F registers using
TSM,
The
tab correctly sends the contents of F2, but
the
return sends the contents of F3 after about a 3
second delay.
It
all works, except for the delay.? The computer
is pretty fast and
don't
think its a matter of a slow cpu.? Hitting F3
sends the contents
|
for some reason my adi file does not have name sent in any contact. is there an easy way to? correct this
Mel
NE9A
|
Lou WA5LOU
Dennis - WU6X
K8TS
Andre - WT9X