Can anyone point me to a reliable conversion tool that will convert an ACLog .mdb database file to an .adif file?
I need one that can be run from the command-line in Windows and doesn't need any user interaction?
|
Re: VHF log recent contact area.
Thank you Scott!!! That worked!!! I have been ignoring this problem for 2 years. Your the best!!! See you.down the log. Kc3ndu
On Sat, Jul 15, 2023 at 6:02 PM, Scott Davis via groups.io <SNKDavis@...> wrote: Hi Keith,
Thanks for your follow up and the screen shot.? That's very helpful.? Click Settings > Reset Columns to Default > Widths.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Saturday, July 15, 2023 at 04:21:51 PM EDT, klynn76565@... via groups.io <klynn76565@...> wrote:
No good, tried all of the above On Sat, Jul 15, 2023 at 4:00 PM, Kevin Gray <n9vpv@...> wrote: Try pressing ESC (escape) key to remove the call that is in the "call" field. Do the recent contacts show then ?
With a call sign in the call box, it will only show recent call with that particular station.?
Are your "Font" colors set to default ? White text won't show on a white background ??
Kevin
N9VPV
|
I had a hard drive crash on my Desktop that is hooked to my Kenwood 2000. I write a back file to my USB D drive. Also I do the same for? my ICOM 7300.
I was wondering if I save and adif file on the ICOM 7300. Then load my mdb file from the Kenwood which dated 7/15 before my crash. Should I save a ADIF flle on the ICOM 7300 so I at least don't loose any qso's. Should I start a new file on my ICOM and upload my Kenwood MDB file?
I hope I explained this ok?
Thanks
--
73's Dave NU4N
|
Re: VHF log recent contact area.
Hi Keith,
Thanks for your follow up and the screen shot.? That's very helpful.? Click Settings > Reset Columns to Default > Widths.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Saturday, July 15, 2023 at 04:21:51 PM EDT, klynn76565@... via groups.io <klynn76565@...> wrote:
No good, tried all of the above
On Sat, Jul 15, 2023 at 4:00 PM, Kevin Gray <n9vpv@...> wrote: Try pressing ESC (escape) key to remove the call that is in the "call" field. Do the recent contacts show then ?
With a call sign in the call box, it will only show recent call with that particular station.?
Are your "Font" colors set to default ? White text won't show on a white background ??
Kevin
N9VPV
|
Re: VHF log recent contact area.
No good, tried all of the above
On Sat, Jul 15, 2023 at 4:00 PM, Kevin Gray <n9vpv@...> wrote: Try pressing ESC (escape) key to remove the call that is in the "call" field. Do the recent contacts show then ?
With a call sign in the call box, it will only show recent call with that particular station.?
Are your "Font" colors set to default ? White text won't show on a white background ??
Kevin
N9VPV
|
Re: VHF log recent contact area.
Try pressing ESC (escape) key to remove the call that is in the "call" field. Do the recent contacts show then ?
With a call sign in the call box, it will only show recent call with that particular station.?
Are your "Font" colors set to default ? White text won't show on a white background ??
Kevin
N9VPV
|
Re: VHF log recent contact area.
I just reset the appearance.? Still no contacts in the recent contact area. I will send a pic. Thank you Scott. Our club uses your great software.? Kc3ndu Keith 14 contacts in the score statistics.? 0 in recent contacts.?
On Sat, Jul 15, 2023 at 2:02 PM, Scott Davis via groups.io <SNKDavis@...> wrote: Hi Keith,
Thanks for your e-mail.? Click Settings > Appearance > Reset Colors to Light Theme.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Saturday, July 15, 2023 at 01:51:51 PM EDT, klynn76565@... via groups.io <klynn76565@...> wrote:
On my VHF log recent contacts area, it's grayed out and will not show contacts. Yet the score statistics works. I am also able to create and send a complete Cabrillo file. How do i address this?? All other n3fjp contest software works flawlessly.?
Keith
KC3NDU?
|
Mark, ? pretty much the same isn’t like”The Same” ? it appears that you don’t have an “Active, Usable Certificate. Depending on how you received your “狈贰奥” Certificate, you still need yo install it in TQSL. ? Have you tried this . . . . ? 
? ? Kevin N9VPV -. ----. …- .--. …- ? ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Mark Griffith via groups.io Sent: Saturday, July 15, 2023 10:16 AM To: [email protected]Subject: Re: [N3FJPSoftwareUsers] LOTW QSO Upload ? Looks, except how do I move it to an Active cert? On Thursday, July 13, 2023 at 06:05:56 PM CDT, Tom Ellis <tl_ellis@...> wrote: Mark, ? Does your TQSL Callsign Certificate tab look like this with your callsign? ? 
? Tom K5TEE ? ? ? I'm sure this question has been asked and answered in the past, but I can find very little info about it, either here or generally on the Internet.? At least nothing that helps my problem. I'm also sure this is a TSQL problem that I am missing. So given these two truths, please be kind to an old man.? :) I have a license for all the N3JPS software, have had so for years.? Never had an issue with the software, very well written and supported. I recently redid a complete re-install of my shack laptop, replacing the buggy Windows 10 and going back to the tried and true (IMHO) Windows 7.? Everything works perfectly.? This was a result of my moving my shack, setting up a new antenna system, and getting back into the hobby after about a 10 year absence from the HF bands and working DX. My TSQL certificate had expired, so I got a new one and installed it correctly, or at least I think I did. So here is the issue:? When I try to upload new QSOs to LOTW, I get this error: TQSL Version 2.6.5 [v2.6.5]
There are no valid callsign certificates for callsign KD0QYN in entity -NONE-.
Signing aborted.
No records to upload
Final Status: No QSOs written(8) I know I have goofed somewhere, but can't see in the TSQL software cert where I am wrong. Perhaps someone can point me to the probably obvious solution. BTW, uploads to eQSL work fine. Thanks in advance for the help and being kind to an older gentleman.
|
toggle quoted message
Show quoted text
Settings, advanced, WW Digi Contest?
Contest name: WW
Thank you.? How about in WSJTX?? What advanced setup should I use?
?
From: Patrick Dickey
Sent: Saturday, July 15, 2023 11:34 AM
Subject: Re: [N3FJPSoftwareUsers] WW VHF Contest
?
says CQ WorldWide VHF, so I would imagine this one.
?
Have a great weekend.
?
Patrick.
?
?
Which software from Affirmatec? should I use for the CQWW VHF contest that starts this afternoon??
|
Settings, advanced, WW Digi Contest?
Contest name: WW
toggle quoted message
Show quoted text
Thank you.? How about in WSJTX?? What advanced setup should I use?
?
From: Patrick Dickey
Sent: Saturday, July 15, 2023 11:34 AM
Subject: Re: [N3FJPSoftwareUsers] WW VHF Contest
?
says CQ WorldWide VHF, so I would imagine this one.
?
Have a great weekend.
?
Patrick.
?
?
Which software from Affirmatec? should I use for the CQWW VHF contest that starts this afternoon??
|
Re: VHF log recent contact area.
Hi Keith,
Thanks for your e-mail.? Click Settings > Appearance > Reset Colors to Light Theme.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Saturday, July 15, 2023 at 01:51:51 PM EDT, klynn76565@... via groups.io <klynn76565@...> wrote:
On my VHF log recent contacts area, it's grayed out and will not show contacts. Yet the score statistics works. I am also able to create and send a complete Cabrillo file. How do i address this?? All other n3fjp contest software works flawlessly.?
Keith
KC3NDU?
|
Thank you.? How about in WSJTX?? What advanced setup should I
use?
toggle quoted message
Show quoted text
From: Patrick Dickey
Sent: Saturday, July 15, 2023 11:34 AM
Subject: Re: [N3FJPSoftwareUsers] WW VHF Contest
?
says CQ
WorldWide VHF, so I would imagine this one.
?
Have a great weekend. ?
Patrick.
?
?
Which software
from Affirmatec? should I use for the CQWW VHF contest that starts this
afternoon??
|
VHF log recent contact area.
On my VHF log recent contacts area, it's grayed out and will not show contacts. Yet the score statistics works. I am also able to create and send a complete Cabrillo file. How do i address this?? All other n3fjp contest software works flawlessly.?
Keith
KC3NDU?
|
|
|
The VHF Contest SW.
Larry? W1DYJ
On 7/15/2023 12:25, Rick wrote:
toggle quoted message
Show quoted text
Which software from Affirmatec? should I use for the CQWW
VHF contest that starts this afternoon??
K5TIA
|
Which software from Affirmatec? should I use for the CQWW VHF contest
that starts this afternoon??
K5TIA
|
Looks pretty much the same, except how do I move it to an Active cert?
Mark KD0QYN
On Thursday, July 13, 2023 at 06:05:56 PM CDT, Tom Ellis <tl_ellis@...> wrote:
Mark, ? Does your TQSL Callsign Certificate tab look like this with your callsign? ? 
? Tom K5TEE ? ?
From: [email protected] [mailto:[email protected]] On Behalf Of Mark Griffith via groups.io
Sent: Thursday, July 13, 2023 2:14 PM
To: [email protected]
Subject: [N3FJPSoftwareUsers] LOTW QSO Upload ? I'm sure this question has been asked and answered in the past, but I can find very little info about it, either here or generally on the Internet.? At least nothing that helps my problem. I'm also sure this is a TSQL problem that I am missing. So given these two truths, please be kind to an old man.? :) I have a license for all the N3JPS software, have had so for years.? Never had an issue with the software, very well written and supported. I recently redid a complete re-install of my shack laptop, replacing the buggy Windows 10 and going back to the tried and true (IMHO) Windows 7.? Everything works perfectly.? This was a result of my moving my shack, setting up a new antenna system, and getting back into the hobby after about a 10 year absence from the HF bands and working DX. My TSQL certificate had expired, so I got a new one and installed it correctly, or at least I think I did. So here is the issue:? When I try to upload new QSOs to LOTW, I get this error: TQSL Version 2.6.5 [v2.6.5]
There are no valid callsign certificates for callsign KD0QYN in entity -NONE-.
Signing aborted.
No records to upload
Final Status: No QSOs written(8) I know I have goofed somewhere, but can't see in the TSQL software cert where I am wrong. Perhaps someone can point me to the probably obvious solution. BTW, uploads to eQSL work fine. Thanks in advance for the help and being kind to an older gentleman.
|
Re: K3 w kio3b n3fjp and vspe
I also use win4k3 - amazing software. ? That solved my problem. ? I used to use HRD for everything but I love Scott’s logger. ? After finding win4k3 I have never switched back to HRD. ?Greg WI4T
|
Re: K3 w kio3b n3fjp and vspe
I use win4k3suite which supports multiple serial ports with n3fjp and ft8, etc. I believe you also use com0com. Been a while since I set it up.
Jim Storms, ab8yk
|
I recently had the exact same issue. ?I found I needed to create a new location for the new certificate.?
|
ckmcdonald
Larry Banks